[PATCH] ata: pata_ftide010: Fix some DMA timings

[Linus Walleij <linusw@kernel.org>]

The FTIDE010 has been missing some timing settings since its
inception, since the upstream OpenWrt patch was missing these.

The community has since come up with the appropriate timings.

Fixes: be4e456ed3a5 ("ata: Add driver for Faraday Technology FTIDE010")
Cc: stable@vger.kernel.org
Signed-off-by: Linus Walleij <linusw@kernel.org>
---
 drivers/ata/pata_ftide010.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/ata/pata_ftide010.c b/drivers/ata/pata_ftide010.c
index c3a8384c3e04..c41da296eb38 100644
--- a/drivers/ata/pata_ftide010.c
+++ b/drivers/ata/pata_ftide010.c
@@ -122,10 +122,10 @@ static const u8 mwdma_50_active_time[3] = {6, 2, 2};
 static const u8 mwdma_50_recovery_time[3] = {6, 2, 1};
 static const u8 mwdma_66_active_time[3] = {8, 3, 3};
 static const u8 mwdma_66_recovery_time[3] = {8, 2, 1};
-static const u8 udma_50_setup_time[6] = {3, 3, 2, 2, 1, 1};
+static const u8 udma_50_setup_time[6] = {3, 3, 2, 2, 1, 9};
 static const u8 udma_50_hold_time[6] = {3, 1, 1, 1, 1, 1};
-static const u8 udma_66_setup_time[7] = {4, 4, 3, 2, };
-static const u8 udma_66_hold_time[7] = {};
+static const u8 udma_66_setup_time[7] = {4, 4, 3, 2, 1, 9, 9};
+static const u8 udma_66_hold_time[7] = {4, 2, 1, 1, 1, 1, 1};
 
 /*
  * We set 66 MHz for all MWDMA modes

---
base-commit: 8f0b4cce4481fb22653697cced8d0d04027cb1e8
change-id: 20260203-gemini-pata-fix-8129e83dec1c

Best regards,
-- 
Linus Walleij <linusw@kernel.org>