Linux ATA/IDE development
 help / color / mirror / Atom feed
From: Juergen Gross <jgross@suse.com>
To: linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org
Cc: Juergen Gross <jgross@suse.com>,
	Damien Le Moal <dlemoal@kernel.org>,
	Niklas Cassel <cassel@kernel.org>
Subject: [PATCH v2 20/32] drivers/ata: Stop using 32-bit MSR interfaces
Date: Fri,  3 Jul 2026 13:25:08 +0200	[thread overview]
Message-ID: <20260703112508.1763119-1-jgross@suse.com> (raw)
In-Reply-To: <20260629060526.3638272-21-jgross@suse.com>

The 32-bit MSR interfaces rdmsr() and wrmsr() are planned to be
removed. Use the related 64-bit variants instead.

In drivers/ata/pata_cs5536.c don't redefine rdmsr() and wrmsr() as
empty macros for avoiding misuse, but guard the affected code via
a simple #ifdef.

Signed-off-by: Juergen Gross <jgross@suse.com>
---
V2:
- avoid sign extension when using wrmsrq() (Sashiko bot)
---
 drivers/ata/pata_cs5535.c | 20 ++++++++++----------
 drivers/ata/pata_cs5536.c | 17 ++++++++---------
 2 files changed, 18 insertions(+), 19 deletions(-)

diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c
index d793fc441b46..e16c7f4c7c27 100644
--- a/drivers/ata/pata_cs5535.c
+++ b/drivers/ata/pata_cs5535.c
@@ -90,7 +90,7 @@ static void cs5535_set_piomode(struct ata_port *ap, struct ata_device *adev)
 	static const u16 pio_cmd_timings[5] = {
 		0xF7F4, 0x53F3, 0x13F1, 0x5131, 0x1131
 	};
-	u32 reg, __maybe_unused dummy;
+	u32 reg;
 	struct ata_device *pair = ata_dev_pair(adev);
 
 	int mode = adev->pio_mode - XFER_PIO_0;
@@ -102,16 +102,16 @@ static void cs5535_set_piomode(struct ata_port *ap, struct ata_device *adev)
 		cmdmode = min(mode, pairmode);
 		/* Write the other drive timing register if it changed */
 		if (cmdmode < pairmode)
-			wrmsr(ATAC_CH0D0_PIO + 2 * pair->devno,
-				pio_cmd_timings[cmdmode] << 16 | pio_timings[pairmode], 0);
+			wrmsrq(ATAC_CH0D0_PIO + 2 * pair->devno,
+				(u32)pio_cmd_timings[cmdmode] << 16 | pio_timings[pairmode]);
 	}
 	/* Write the drive timing register */
-	wrmsr(ATAC_CH0D0_PIO + 2 * adev->devno,
-		pio_cmd_timings[cmdmode] << 16 | pio_timings[mode], 0);
+	wrmsrq(ATAC_CH0D0_PIO + 2 * adev->devno,
+		(u32)pio_cmd_timings[cmdmode] << 16 | pio_timings[mode]);
 
 	/* Set the PIO "format 1" bit in the DMA timing register */
-	rdmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, dummy);
-	wrmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg | 0x80000000UL, 0);
+	rdmsrq(ATAC_CH0D0_DMA + 2 * adev->devno, reg);
+	wrmsrq(ATAC_CH0D0_DMA + 2 * adev->devno, reg | 0x80000000UL);
 }
 
 /**
@@ -129,16 +129,16 @@ static void cs5535_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 	static const u32 mwdma_timings[3] = {
 		0x7F0FFFF3, 0x7F035352, 0x7F024241
 	};
-	u32 reg, __maybe_unused dummy;
+	u32 reg;
 	int mode = adev->dma_mode;
 
-	rdmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, dummy);
+	rdmsrq(ATAC_CH0D0_DMA + 2 * adev->devno, reg);
 	reg &= 0x80000000UL;
 	if (mode >= XFER_UDMA_0)
 		reg |= udma_timings[mode - XFER_UDMA_0];
 	else
 		reg |= mwdma_timings[mode - XFER_MW_DMA_0];
-	wrmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, 0);
+	wrmsrq(ATAC_CH0D0_DMA + 2 * adev->devno, reg);
 }
 
 static const struct scsi_host_template cs5535_sht = {
diff --git a/drivers/ata/pata_cs5536.c b/drivers/ata/pata_cs5536.c
index 73e81e160c91..61d232a82b5e 100644
--- a/drivers/ata/pata_cs5536.c
+++ b/drivers/ata/pata_cs5536.c
@@ -32,11 +32,8 @@
 static int use_msr;
 module_param_named(msr, use_msr, int, 0644);
 MODULE_PARM_DESC(msr, "Force using MSR to configure IDE function (Default: 0)");
+#define MAYBE_USE_MSR
 #else
-#undef rdmsr	/* avoid accidental MSR usage on, e.g. x86-64 */
-#undef wrmsr
-#define rdmsr(x, y, z) do { } while (0)
-#define wrmsr(x, y, z) do { } while (0)
 #define use_msr 0
 #endif
 
@@ -85,22 +82,24 @@ static const struct dmi_system_id udma_quirk_dmi_table[] = {
 
 static int cs5536_read(struct pci_dev *pdev, int reg, u32 *val)
 {
+#ifdef MAYBE_USE_MSR
 	if (unlikely(use_msr)) {
-		u32 dummy __maybe_unused;
-
-		rdmsr(MSR_IDE_CFG + reg, *val, dummy);
+		rdmsrq(MSR_IDE_CFG + reg, *val);
 		return 0;
 	}
+#endif
 
 	return pci_read_config_dword(pdev, PCI_IDE_CFG + reg * 4, val);
 }
 
-static int cs5536_write(struct pci_dev *pdev, int reg, int val)
+static int cs5536_write(struct pci_dev *pdev, int reg, u32 val)
 {
+#ifdef MAYBE_USE_MSR
 	if (unlikely(use_msr)) {
-		wrmsr(MSR_IDE_CFG + reg, val, 0);
+		wrmsrq(MSR_IDE_CFG + reg, val);
 		return 0;
 	}
+#endif
 
 	return pci_write_config_dword(pdev, PCI_IDE_CFG + reg * 4, val);
 }
-- 
2.54.0


  parent reply	other threads:[~2026-07-03 11:25 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-29  6:04 [PATCH 00/32] x86/msr: Drop 32-bit MSR interfaces Juergen Gross
2026-06-29  6:05 ` [PATCH 20/32] drivers/ata: Stop using " Juergen Gross
2026-06-29  6:23   ` sashiko-bot
2026-06-29  7:28     ` Jürgen Groß
2026-07-03 11:25   ` Juergen Gross [this message]
2026-06-29  6:05 ` [PATCH 31/32] treewide: convert rdmsrq() from a macro to an inline function Juergen Gross
2026-06-29  6:24   ` sashiko-bot
2026-06-29  6:52 ` [PATCH 00/32] x86/msr: Drop 32-bit MSR interfaces Arnd Bergmann
2026-06-29  7:01   ` Jürgen Groß
2026-06-29  8:06     ` Arnd Bergmann
2026-06-29  8:15       ` Jürgen Groß
2026-06-29  8:38         ` Arnd Bergmann
2026-06-30 20:06           ` H. Peter Anvin
2026-06-29 11:19       ` Ingo Molnar
2026-06-30 18:59         ` Sean Christopherson
2026-07-01  8:33           ` Jürgen Groß
2026-07-02 10:07           ` Ingo Molnar
2026-07-02 11:03             ` Juergen Gross

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260703112508.1763119-1-jgross@suse.com \
    --to=jgross@suse.com \
    --cc=cassel@kernel.org \
    --cc=dlemoal@kernel.org \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox