* Difficulties building IDE as module in linux-2.5.37
@ 2002-09-22 15:14 Steven Campbell
0 siblings, 0 replies; only message in thread
From: Steven Campbell @ 2002-09-22 15:14 UTC (permalink / raw)
To: linux-ide
2. When building IDE as a module, this happens:
gcc -Wp,-MD,./.ide.o.d -D__KERNEL__ -I/usr/src/linux-2.5.37/include
-Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fomit-frame-pointer
-fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2
-march=i686 -I/usr/src/linux-2.5.37/arch/i386/mach-generic -nostdinc
-iwithprefix include -DMODULE -include
/usr/src/linux-2.5.37/include/linux/modversions.h
-DKBUILD_BASENAME=ide -DEXPORT_SYMTAB -c -o ide.o ide.c
ide.c:3572: redefinition of `init_module'
ide.c:3550: `init_module' previously defined here
{standard input}: Assembler messages:
{standard input}:8612: Error: symbol `init_module' is already defined
make[2]: *** [ide.o] Error 1
make[2]: Leaving directory `/usr/src/linux-2.5.37/drivers/ide'
make[1]: *** [ide] Error 2
make[1]: Leaving directory `/usr/src/linux-2.5.37/drivers'
make: *** [drivers] Error 2
Summary: IDE module build difficulties
4. kernel version 2.5.37
5. oops output not relevant
6. small shell script replicating problem not relevant
7. Environment:
Linux Phalanx.gsc.noc 2.4.19 #1 SMP Sun Sep 15 16:45:27 EDT 2002 i686
unknown
Gnu C 2.95.3
Gnu make 3.79.1
util-linux 2.11u
mount 2.11u
modutils 2.4.19
e2fsprogs 1.28
pcmcia-cs 3.1.25
PPP 2.4.0
Linux C Library 2.2.1
Dynamic linker (ldd) 2.2.1
Procps 2.0.7
Net-tools 1.57
Kbd 1.04
Sh-utils 2.0
Modules Loaded
7.2 cpu info:
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 6
cpu MHz : 797.561
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov
pat pse36 mmx fxsr sse
bogomips : 1592.52
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 6
cpu MHz : 797.561
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov
pat pse36 mmx fxsr sse
bogomips : 1592.52
7.3 module information
No modules loaded
7.4 I/O ports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
03c0-03df : vga+
0800-083f : Intel Corp. 82371AB/EB/MB PIIX4 ACPI
0840-085f : Intel Corp. 82371AB/EB/MB PIIX4 ACPI
0cf8-0cff : PCI conf1
1000-100f : Intel Corp. 82371AB/EB/MB PIIX4 IDE
ec00-ec7f : 3Com Corporation 3c905B 100BaseTX [Cyclone]
ec00-ec7f : 00:11.0
ece0-ecff : Intel Corp. 82371AB/EB/MB PIIX4 USB
ece0-ecff : usb-uhci
f000-ffff : PCI Bus #02
f800-f8ff : Adaptec AIC-7880U
fc00-fcff : Adaptec AHA-2940U2/U2W / 7890/7891
7.4 I/O memory
00000000-0009ffff : System RAM
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000c8000-000cc7ff : Extension ROM
000cc800-000ccfff : Extension ROM
000cd000-000cffff : Extension ROM
000f0000-000fffff : System ROM
00100000-3fffdfff : System RAM
00100000-0025973f : Kernel code
00259740-002e975f : Kernel data
3fffe000-3fffffff : reserved
ec000000-efffffff : Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge
f1000000-f1ffffff : PCI Bus #02
f2000000-f5ffffff : PCI Bus #01
f4000000-f5ffffff : Matrox Graphics, Inc. MGA G400 AGP
fa000000-fbffffff : PCI Bus #02
faffe000-faffefff : Adaptec AIC-7880U
faffe000-faffefff : aic7xxx
fafff000-faffffff : Adaptec AHA-2940U2/U2W / 7890/7891
fafff000-faffffff : aic7xxx
fc000000-fdffffff : PCI Bus #01
fc000000-fc7fffff : Matrox Graphics, Inc. MGA G400 AGP
fcffc000-fcffffff : Matrox Graphics, Inc. MGA G400 AGP
fe000000-fe0fffff : Cirrus Logic CS 4614/22/24 [CrystalClear SoundFusion
Audio A
ccelerator]
fe100000-fe100fff : Cirrus Logic CS 4614/22/24 [CrystalClear SoundFusion
Audio A
ccelerator]
fe101000-fe10107f : 3Com Corporation 3c905B 100BaseTX [Cyclone]
fec00000-fec0ffff : reserved
fee00000-fee0ffff : reserved
ffe00000-ffffffff : reserved
7.5 PCI information
00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge
(rev 02
)
Subsystem: Dell Computer Corporation: Unknown device 0080
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Step
ping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort
- <MAbort+ >SERR- <PERR-
Latency: 64
Region 0: Memory at ec000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA+ AGP+ 64bit- FW- Rate=x1
00:01.0 PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge
(rev 02)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop-
ParErr- Step
ping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort
- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fc000000-fdffffff
Prefetchable memory behind bridge: f2000000-f5ffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B+
00:07.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Step
ping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort
- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01)
(prog-if 80
[Master])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Step
ping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort
- <MAbort- >SERR- <PERR-
Region 4: I/O ports at 1000 [disabled] [size=16]
00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01)
(prog-if 00
[UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Step
ping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort
- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at ece0 [size=32]
00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Step
ping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort
- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
00:0e.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24
[CrystalClear So
undFusion Audio Accelerator] (rev 01)
Subsystem: Voyetra Technologies: Unknown device 3357
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Step
ping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
<TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (1000ns min, 6000ns max)
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fe100000 (32-bit, non-prefetchable) [size=4K]
Region 1: Memory at fe000000 (32-bit, non-prefetchable) [size=1M]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot
-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone]
Subsystem: Dell Computer Corporation 3C905B Fast Etherlink XL
10/100
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Step
ping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort
- <MAbort- >SERR- <PERR-
Latency: 64 (2500ns min, 2500ns max), cache line size 08
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at ec00 [size=128]
Region 1: Memory at fe101000 (32-bit, non-prefetchable) [size=128]
Expansion ROM at f9000000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1+,D2+,D3hot
+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:13.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 03)
(prog-i
f 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Step
ping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort
- <MAbort- >SERR- <PERR-
Latency: 64, cache line size 08
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
I/O behind bridge: 0000f000-0000ffff
Memory behind bridge: fa000000-fbffffff
Prefetchable memory behind bridge:
00000000f1000000-00000000f1f00000
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=220mA
PME(D0-,D1-,D2-,D3h
ot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP
(rev 04) (
prog-if 00 [VGA])
Subsystem: Matrox Graphics, Inc. Millennium G400 MAX/Dual Head 32Mb
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Step
ping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort
- <MAbort- >SERR- <PERR-
Latency: 64 (4000ns min, 8000ns max), cache line size 08
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f4000000 (32-bit, prefetchable) [size=32M]
Region 1: Memory at fcffc000 (32-bit, non-prefetchable) [size=16K]
Region 2: Memory at fc000000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at 80000000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot
-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [f0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=31 SBA+ AGP+ 64bit- FW- Rate=x1
02:0a.0 SCSI storage controller: Adaptec AHA-2940U2/W / 7890
Subsystem: Dell Computer Corporation: Unknown device 0080
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Step
ping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort
- <MAbort- >SERR- <PERR-
Latency: 64 (9750ns min, 6250ns max), cache line size 08
Interrupt: pin A routed to IRQ 18
BIST result: 00
Region 0: I/O ports at fc00 [disabled] [size=256]
Region 1: Memory at fafff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at fb000000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot
-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:0e.0 SCSI storage controller: Adaptec AIC-7880U (rev 01)
Subsystem: Adaptec AIC-7880P Ultra/Ultra Wide SCSI Chipset
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Step
ping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort
- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min, 2000ns max), cache line size 08
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at f800 [disabled] [size=256]
Region 1: Memory at faffe000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at fb000000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot
-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
7.6 SCSI information
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: COMPAQPC Model: MAN3184MP Rev: 1805
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: QUANTUM Model: VIKING II 4.5WLS Rev: 3506
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 06 Lun: 00
Vendor: PLEXTOR Model: CD-ROM PX-40TW Rev: 1.04
Type: CD-ROM ANSI SCSI revision: 02
8. IDE stuff will build if linked into the kernel, but will not build as
modules. Currently I don't have any devices connected to the IDE buses
in this box, but hope to have soon.
Regards,
Steven Campbell
--
Fortune cookie for the day is:
A woman's best protection is a little money of her own.
-- Clare Booth Luce, quoted in "The Wit of Women"
Steven Campbell
scampbell@ncrypted.org
http://www.ncrypted.org
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2002-09-23 15:00 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-09-22 15:14 Difficulties building IDE as module in linux-2.5.37 Steven Campbell
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).