From mboxrd@z Thu Jan 1 00:00:00 1970 From: Segher Boessenkool Subject: Re: [PATCH 2/2] [POWERPC] mmio ide support for mpc8349-itx target Date: Sun, 8 Jul 2007 15:31:43 +0200 Message-ID: <3F401C47-2A18-4692-AA71-D0D5FE24D94F@kernel.crashing.org> References: <20070707094852.9473.21013.stgit@localhost.localdomain> <20070707094900.9473.48577.stgit@localhost.localdomain> <468FC376.2040405@ru.mvista.com> Mime-Version: 1.0 (Apple Message framework v752.2) Content-Type: text/plain; charset=US-ASCII; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from gate.crashing.org ([63.228.1.57]:51805 "EHLO gate.crashing.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750999AbXGHNcE (ORCPT ); Sun, 8 Jul 2007 09:32:04 -0400 In-Reply-To: <468FC376.2040405@ru.mvista.com> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Sergei Shtylyov Cc: Vitaly Bordug , linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org, linuxppc-dev@ozlabs.org >> + ide@10000000 { >> + #interrupt-cells = <2>; > > Hm, why define that prop for a node with no children? > >> + interrupts = <17 8>; >> + interrupt-map = <0 0 0 1 700 17 8>; >> + interrupt-map-mask = <0>; This map-mask makes no sense either. And neither does the map itself. >> + >> + #size-cells = <1>; >> + #address-cells = <1>; > > Same question here. The ide node might want children, namely disks or optical drives or such, but #size-cells should be 0. >> + reg = <10000000 10 10000200 10>; >> + >> + device_type = "ide"; > > I think that already adopted device type is "ata", not "ide". "ata" is not a hardware thing, "ide" is. Or so I'm told. I'd leave out the "device_type" completely though, certainly if you can't point me at a published device binding :-) Segher