From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jeff Garzik Subject: Re: [PATCH,RFT] VIA SATA driver update Date: Fri, 19 Mar 2004 11:38:22 -0500 Sender: linux-ide-owner@vger.kernel.org Message-ID: <405B21FE.4010609@pobox.com> References: <405828DB.7060005@pobox.com> <200403171236.21145.tvrtko@croadria.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-2; format=flowed Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Received: from parcelfarce.linux.theplanet.co.uk ([195.92.249.252]:15042 "EHLO www.linux.org.uk") by vger.kernel.org with ESMTP id S263017AbUCSQif (ORCPT ); Fri, 19 Mar 2004 11:38:35 -0500 In-Reply-To: <200403171236.21145.tvrtko@croadria.com> List-Id: linux-ide@vger.kernel.org To: =?ISO-8859-2?Q?=22Tvrtko_A=2E_Ur=B9ulin=22?= Cc: linux-ide@vger.kernel.org, Linux Kernel Tvrtko A. Ur=B9ulin wrote: > libata version 1.01 loaded. > sata_via version 0.20 > sata_via(0000:00:0f.0): routed to hard irq line 11 > ata1: SATA max UDMA/133 cmd 0xB400 ctl 0xB802 bmdma 0xC400 irq 11 > ata2: SATA max UDMA/133 cmd 0xBC00 ctl 0xC002 bmdma 0xC408 irq 11 > ata1 is slow to respond, please be patient > ata1 failed to respond (30 secs) > ata1: thread exiting > scsi0 : sata_via > ata2: no device found (phy stat 00000000) > ata2: thread exiting > scsi1 : sata_via >=20 > This is the same behavior I get ever since 2.6.1 when I started testi= ng 2.6=20 > seried. It also doesn't work under 2.6 with IDE generic support for=20 > VIA8237SATA (irq timeout, dma timeout) Ok... Does enabling SMP (CONFIG_SMP) fix things for you? (Note, this should work fine even on a uniprocessor machine) Jeff