From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jeff Garzik Subject: Re: VIA SATA not recognizing drives Date: Sat, 08 May 2004 17:29:10 -0400 Sender: linux-ide-owner@vger.kernel.org Message-ID: <409D5126.2060205@pobox.com> References: <20040508193100.GA31122@buici.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from parcelfarce.linux.theplanet.co.uk ([195.92.249.252]:52402 "EHLO www.linux.org.uk") by vger.kernel.org with ESMTP id S264165AbUEHV32 (ORCPT ); Sat, 8 May 2004 17:29:28 -0400 In-Reply-To: <20040508193100.GA31122@buici.com> List-Id: linux-ide@vger.kernel.org To: Marc Singer Cc: linux-ide@vger.kernel.org Marc Singer wrote: > libata version 1.02 loaded. > sata_via version 0.20 > sata_via(0000:00:0f.0): routed to hard irq line 10 > ata1: SATA max UDMA/133 cmd 0xEC00 ctl 0xE802 bmdma 0xDC00 irq 10 > ata2: SATA max UDMA/133 cmd 0xE400 ctl 0xE002 bmdma 0xDC08 irq 10 > ata1: no device found (phy stat 00000000) > ata1: thread exiting > scsi0 : sata_via > ata2: no device found (phy stat 00000000) > ata2: thread exiting > scsi1 : sata_via Those "phy stat 00000000" are the hardware saying there is no SATA device attached. Are you sure you plugged them into the VIA SATA ports? Maybe you have a Promise chip on-board too, or something like that? Or SATA is disabled in BIOS? Jeff