linux-ide.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* SATA Promise driver
@ 2004-06-02 18:25 Jim B
  2004-06-02 18:40 ` Jeff Garzik
  0 siblings, 1 reply; 2+ messages in thread
From: Jim B @ 2004-06-02 18:25 UTC (permalink / raw)
  To: jgarzik; +Cc: linux-ide

 Jeff

I have a K8V SE Deluxe MoBo with a Promise FastTrack 378 controller.  It can be
used as a RAID or extended IDE controller by sellecting the proper BIOS setting.
I have tried the RAID setting and used ft3xx.o driver (from Promise) in FC1 2.4
kernels to use the two 160 GB IDE disks.  I currently have it set to extended
IDE.  I use the pdc-ultra.o driver (from Promise) in FC1 2.4 kernels for this
mode.  I installed FC2 x86_64 version to another partition on the standard IDE
disk.  It boots and works, except it will not see the PATA drives on the Promise
controller.  It says there are no drives present.  Does the SATA_Promise module
support this controller in either of these modes?  Am I doing something wrong?
Is it because I am using IDE drives instead of SATA drivers?

Jim


^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: SATA Promise driver
  2004-06-02 18:25 SATA Promise driver Jim B
@ 2004-06-02 18:40 ` Jeff Garzik
  0 siblings, 0 replies; 2+ messages in thread
From: Jeff Garzik @ 2004-06-02 18:40 UTC (permalink / raw)
  To: Jim B; +Cc: linux-ide

Jim B wrote:
>  Jeff
> 
> I have a K8V SE Deluxe MoBo with a Promise FastTrack 378 controller.  It can be
> used as a RAID or extended IDE controller by sellecting the proper BIOS setting.
> I have tried the RAID setting and used ft3xx.o driver (from Promise) in FC1 2.4
> kernels to use the two 160 GB IDE disks.  I currently have it set to extended
> IDE.  I use the pdc-ultra.o driver (from Promise) in FC1 2.4 kernels for this
> mode.  I installed FC2 x86_64 version to another partition on the standard IDE
> disk.  It boots and works, except it will not see the PATA drives on the Promise
> controller.  It says there are no drives present.  Does the SATA_Promise module
> support this controller in either of these modes?  Am I doing something wrong?
> Is it because I am using IDE drives instead of SATA drivers?

As the name implies, sata_promise driver does not support PATA.

This support is planned, but not present yet.

	Jeff




^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2004-06-02 18:40 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-06-02 18:25 SATA Promise driver Jim B
2004-06-02 18:40 ` Jeff Garzik

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).