From: Jeff Garzik <jgarzik@pobox.com>
To: rme@image.dk
Cc: linux-ide@vger.kernel.org
Subject: Re: sata_sil + Maxtor
Date: Fri, 08 Oct 2004 10:50:34 -0400 [thread overview]
Message-ID: <4166A93A.4030403@pobox.com> (raw)
In-Reply-To: <200410080948.45286.rme@image.dk>
Rasmus Melgaard wrote:
> Hi,
>
> I have a IDE/SATA problem. I have a Silicon Image 3112 sata-controller with a
> Maxtor 160 Gb drive connected. Controller and drive is detected in the
> kernel-boot process, but an error happens during boot, I think the linux
> driver gets an response it doesn't expect.
>
> I'm using for testing the mm-kernel: 2.6.9-rc1-mm1. Every thing seems to work
> in Windows, but since I mainly use Linux (Gentoo), I would like it to work
> here.
>
> Does anybody have an ideer of how to proceed to solve this problem ?
>
> Mvh
> Rasmus
>
> Important part of log:
> Sep 5 15:55:39 rasmus scsi1 : sata_sil
> Sep 5 15:55:39 rasmus ata2: no device found (phy stat 00000000)
> Sep 5 15:55:39 rasmus scsi2 : sata_sil
> Sep 5 15:55:39 rasmus Vendor: ATA Model: Maxtor 6Y160M0 Rev: YAR5
> Sep 5 15:55:39 rasmus Type: Direct-Access ANSI SCSI
> revision: 05
> Sep 5 15:55:39 rasmus SCSI device sda: 320173056 512-byte hdwr sectors
> (163929 MB)
> Sep 5 15:55:39 rasmus SCSI device sda: drive cache: write back
> Sep 5 15:55:39 rasmus /dev/scsi/host1/bus0/target0/lun0:<3>ata1: command 0x25
> timeout, stat 0x58 host_stat 0x60
> Sep 5 15:55:39 rasmus ata1: status=0x58 { DriveReady SeekComplete
> DataRequest }
> Sep 5 15:55:39 rasmus SCSI error : <1 0 0 0> return code = 0x8000002
> Sep 5 15:55:39 rasmus Current sda: sense = 70 10
> Sep 5 15:55:39 rasmus end_request: I/O error, dev sda, sector 0
> Sep 5 15:55:39 rasmus Buffer I/O error on device sda, logical block 0
> Sep 5 15:55:39 rasmus ATA: abnormal status 0x58 on port 0xE882E087
> Sep 5 15:55:39 rasmus ATA: abnormal status 0x58 on port 0xE882E087
> Sep 5 15:55:39 rasmus ATA: abnormal status 0x58 on port 0xE882E087
> Sep 5 15:55:39 rasmus ata1: command 0x25 timeout, stat 0xd8 host_stat 0x61
> Sep 5 15:55:39 rasmus ata1: status=0xd8 { Busy }
> Sep 5 15:55:39 rasmus SCSI error : <1 0 0 0> return code = 0x8000002
> Sep 5 15:55:39 rasmus Current sda: sense = 70 10
> Sep 5 15:55:39 rasmus end_request: I/O error, dev sda, sector 0
> Sep 5 15:55:39 rasmus Buffer I/O error on device sda, logical block 0
It's quite clearly a device error... Try upgrading your system and card
BIOS, try switching cables, try booting with "noapic" or "acpi=off" or
"pci=biosirq" or something like that...
Jeff
next prev parent reply other threads:[~2004-10-08 14:50 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-10-08 7:48 sata_sil + Maxtor Rasmus Melgaard
2004-10-08 14:50 ` Jeff Garzik [this message]
2004-11-24 10:26 ` David Greaves
2004-11-27 17:57 ` Solution -> sata_sil + Maxtor problem Rasmus Melgaard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4166A93A.4030403@pobox.com \
--to=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
--cc=rme@image.dk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).