From mboxrd@z Thu Jan 1 00:00:00 1970 From: Christopher Chan Subject: Re: linux 2.6.9 controller order reordered. was: [Re: linux 2.6.9 still having network code problems] Date: Tue, 02 Nov 2004 17:21:55 +0800 Message-ID: <418751B3.8090003@outblaze.com> References: <418741EB.3080701@outblaze.com> <20041102011918.2b453e21.akpm@osdl.org> <4187478A.1040002@outblaze.com> <20041102014119.1a6096cc.akpm@osdl.org> <41874D93.9000008@outblaze.com> <20041102020712.18218d47.akpm@osdl.org> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from corpmail.outblaze.com ([203.86.166.82]:26545 "EHLO corpmail.outblaze.com") by vger.kernel.org with ESMTP id S261990AbUKBJVl (ORCPT ); Tue, 2 Nov 2004 04:21:41 -0500 In-Reply-To: <20041102020712.18218d47.akpm@osdl.org> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Andrew Morton Cc: linux-ide@vger.kernel.org >>Hardware: Tyan mb with Serverworks chipset and onboard Promise controller. >> The two disks on promise channel since Serverworks does not support ATA100 >> >>FC2 Installation will recognise the disks as hde and hdg >>fstab is accordingly setup as so for swap (everything else are md) >> >>Changing to a 2.6.9 kernel that has the promise driver compiled in will >>change the disks to hda and hdc. > > > Could you send the dmesg output so we can see the probing activity? > With FC2 2.6.8-1.521smp ~~~~~~~~~~~~~~~~~~~~~~~~ Oct 14 11:34:50 spf5-3 kernel: RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Oct 14 11:34:50 spf5-3 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Oct 14 11:34:50 spf5-3 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Oct 14 11:34:50 spf5-3 nfslock: rpc.statd startup succeeded Oct 14 11:34:50 spf5-3 kernel: PDC20267: IDE controller at PCI slot 0000:00:03.0 Oct 14 11:34:50 spf5-3 kernel: PDC20267: chipset revision 2 Oct 14 11:34:50 spf5-3 kernel: PDC20267: ROM enabled at 0xfead0000 Oct 14 11:34:50 spf5-3 kernel: PDC20267: 100%% native mode on irq 161 Oct 14 11:34:50 spf5-3 kernel: PDC20267: (U)DMA Burst Bit ENABLED Primary MASTER Mode Secondary MASTER Mode. Oct 14 11:34:50 spf5-3 kernel: ide2: BM-DMA at 0xdf00-0xdf07, BIOS settings: hde:pio, hdf:pio Oct 14 11:34:50 spf5-3 kernel: ide3: BM-DMA at 0xdf08-0xdf0f, BIOS settings: hdg:pio, hdh:pio Oct 14 11:34:50 spf5-3 kernel: hde: Maxtor 5T040H4, ATA DISK drive Oct 14 11:34:50 spf5-3 kernel: Using deadline io scheduler Oct 14 11:34:50 spf5-3 kernel: ide2 at 0xdfe0-0xdfe7,0xdfae on irq 161 Oct 14 11:34:50 spf5-3 kernel: hdg: Maxtor 5T040H4, ATA DISK drive Oct 14 11:34:50 spf5-3 kernel: ide3 at 0xdfa0-0xdfa7,0xdfaa on irq 161 Oct 14 11:34:50 spf5-3 kernel: SvrWks OSB4: IDE controller at PCI slot 0000:00:0f.1 Oct 14 11:34:50 spf5-3 kernel: PCI: Enabling device 0000:00:0f.1 (0000 -> 0001) Oct 14 11:34:50 spf5-3 kernel: SvrWks OSB4: chipset revision 0 Oct 14 11:34:50 spf5-3 kernel: SvrWks OSB4: not 100%% native mode: will probe irqs later Oct 14 11:34:50 spf5-3 kernel: ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio Oct 14 11:34:50 spf5-3 kernel: ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio Oct 14 11:34:50 spf5-3 kernel: hde: max request size: 128KiB Oct 14 11:34:50 spf5-3 kernel: hde: 80043264 sectors (40982 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) Oct 14 11:34:50 spf5-3 kernel: hde: hde1 hde2 hde3 hde4 < hde5 > Oct 14 11:34:50 spf5-3 kernel: hdg: max request size: 128KiB Oct 14 11:34:50 spf5-3 kernel: hdg: 80043264 sectors (40982 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) Oct 14 11:34:50 spf5-3 kernel: hdg: hdg1 hdg2 hdg3 hdg4 < hdg5 > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ With 2.6.9 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Using deadline io scheduler Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Compaq SMART2 Driver (v 2.6.0) HP CISS Driver (v 2.6.2) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PDC20267: IDE controller at PCI slot 0000:00:03.0 PDC20267: chipset revision 2 PDC20267: ROM enabled at 0xfead0000 PDC20267: 100% native mode on irq 31 PDC20267: (U)DMA Burst Bit ENABLED Primary MASTER Mode Secondary MASTER Mode. ide0: BM-DMA at 0xdf00-0xdf07, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xdf08-0xdf0f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: Maxtor 5T040H4, ATA DISK drive ide0 at 0xdfe0-0xdfe7,0xdfae on irq 31 Probing IDE interface ide1... hdc: Maxtor 5T040H4, ATA DISK drive ide1 at 0xdfa0-0xdfa7,0xdfaa on irq 31 SvrWks OSB4: IDE controller at PCI slot 0000:00:0f.1 PCI: Enabling device 0000:00:0f.1 (0000 -> 0001) SvrWks OSB4: chipset revision 0 SvrWks OSB4: not 100% native mode: will probe irqs later ide2: BM-DMA at 0xffa0-0xffa7, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdg:pio, hdh:pio Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... ide4: Wait for ready failed before probe ! Probing IDE interface ide5... ide5: Wait for ready failed before probe ! hda: max request size: 128KiB hda: 80043264 sectors (40982 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes not supported hda: hda1 hda2 hda3 hda4 < hda5 > hdc: max request size: 128KiB hdc: 80043264 sectors (40982 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) hdc: cache flushes not supported hdc: hdc1 hdc2 hdc3 hdc4 < hdc5 > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~