From: Christopher Chan <cchan@outblaze.com>
To: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Andrew Morton <akpm@osdl.org>, linux-ide@vger.kernel.org
Subject: Re: linux 2.6.9 controller order reordered. was: [Re: linux 2.6.9 still having network code problems]
Date: Wed, 03 Nov 2004 14:57:36 +0800 [thread overview]
Message-ID: <41888160.5080502@outblaze.com> (raw)
In-Reply-To: <1099413643.24934.1.camel@localhost.localdomain>
> What are you on about ? The problem is that in the two traces his
> serverworks has moved from ide0 to ide2.
Here's the other case on another box that has onboard Promise plus an
add-on Promise card:
2.6.9:
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PDC20267: IDE controller at PCI slot 0000:01:02.0
PDC20267: chipset revision 2
PDC20267: ROM enabled at 0xfebd0000
PDC20267: 100% native mode on irq 27
PDC20267: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode.
ide0: BM-DMA at 0xef00-0xef07, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xef08-0xef0f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
Probing IDE interface ide1...
PDC20267: IDE controller at PCI slot 0000:00:03.0
PDC20267: chipset revision 2
PDC20267: ROM enabled at 0xfeae0000
PDC20267: 100% native mode on irq 31
PDC20267: (U)DMA Burst Bit ENABLED Primary MASTER Mode Secondary MASTER
Mode.
ide2: BM-DMA at 0xdf00-0xdf07, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0xdf08-0xdf0f, BIOS settings: hdg:pio, hdh:pio
Probing IDE interface ide2...
hde: Maxtor 5T040H4, ATA DISK drive
ide2 at 0xdfe0-0xdfe7,0xdfae on irq 31
Probing IDE interface ide3...
hdg: Maxtor 5T040H4, ATA DISK drive
ide3 at 0xdfa0-0xdfa7,0xdfaa on irq 31
SvrWks OSB4: IDE controller at PCI slot 0000:00:0f.1
SvrWks OSB4: chipset revision 0
SvrWks OSB4: not 100% native mode: will probe irqs later
ide4: BM-DMA at 0xffa0-0xffa7, BIOS settings: hdi:pio, hdj:pio
ide5: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdk:pio, hdl:pio
Probing IDE interface ide4...
Probing IDE interface ide5...
Probing IDE interface ide0...
Probing IDE interface ide1...
Probing IDE interface ide4...
Probing IDE interface ide5...
hde: max request size: 128KiB
hde: 80043264 sectors (40982 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hde: cache flushes not supported
hde: hde1 hde2 hde3 hde4 < hde5 >
hdg: max request size: 128KiB
hdg: 80043264 sectors (40982 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hdg: cache flushes not supported
2.6.8-1.521smp (FC2):
Oct 14 04:46:49 spf0 kernel: ide: Assuming 33MHz system bus speed for
PIO modes; override with idebus=xx
Oct 14 04:46:49 spf0 kernel: PDC20267: IDE controller at PCI slot
0000:01:02.0
Oct 14 04:46:49 spf0 kernel: PDC20267: chipset revision 2
Oct 14 04:46:49 spf0 kernel: PDC20267: ROM enabled at 0xfebd0000
Oct 14 04:46:49 spf0 kernel: PDC20267: 100%% native mode on irq 153
Oct 14 04:46:49 spf0 kernel: PDC20267: (U)DMA Burst Bit ENABLED Primary
PCI Mode Secondary PCI Mode.
Oct 14 04:46:49 spf0 kernel: ide2: BM-DMA at 0xef00-0xef07, BIOS
settings: hde:pio, hdf:pio
Oct 14 04:46:49 spf0 kernel: ide3: BM-DMA at 0xef08-0xef0f, BIOS
settings: hdg:pio, hdh:pio
Oct 14 04:46:49 spf0 kernel: PDC20267: IDE controller at PCI slot
0000:00:03.0
Oct 14 04:46:49 spf0 kernel: PDC20267: chipset revision 2
Oct 14 04:46:49 spf0 kernel: PDC20267: ROM enabled at 0xfeae0000
Oct 14 04:46:49 spf0 kernel: PDC20267: 100%% native mode on irq 161
Oct 14 04:46:49 spf0 kernel: PDC20267: (U)DMA Burst Bit ENABLED Primary
MASTER Mode Secondary MASTER Mode.
Oct 14 04:46:49 spf0 kernel: ide4: BM-DMA at 0xdf00-0xdf07, BIOS
settings: hdi:pio, hdj:pio
Oct 14 04:46:49 spf0 kernel: ide5: BM-DMA at 0xdf08-0xdf0f, BIOS
settings: hdk:pio, hdl:pio
Oct 14 04:46:49 spf0 kernel: hdi: Maxtor 5T040H4, ATA DISK drive
Oct 14 04:46:49 spf0 kernel: Using cfq io scheduler
Oct 14 04:46:49 spf0 kernel: ide4 at 0xdfe0-0xdfe7,0xdfae on irq 161
Oct 14 04:46:49 spf0 kernel: hdk: Maxtor 5T040H4, ATA DISK drive
Oct 14 04:46:49 spf0 kernel: ide5 at 0xdfa0-0xdfa7,0xdfaa on irq 161
Oct 14 04:46:49 spf0 kernel: SvrWks OSB4: IDE controller at PCI slot
0000:00:0f.1
Oct 14 04:46:49 spf0 kernel: SvrWks OSB4: chipset revision 0
Oct 14 04:46:49 spf0 kernel: SvrWks OSB4: not 100%% native mode: will
probe irqs later
Oct 14 04:46:49 spf0 kernel: ide0: BM-DMA at 0xffa0-0xffa7, BIOS
settings: hda:pio, hdb:pio
Oct 14 04:46:49 spf0 kernel: ide1: BM-DMA at 0xffa8-0xffaf, BIOS
settings: hdc:pio, hdd:pio
Oct 14 04:46:49 spf0 kernel: hdi: max request size: 128KiB
Oct 14 04:46:49 spf0 kernel: hdi: 80043264 sectors (40982 MB) w/2048KiB
Cache, CHS=65535/16/63, UDMA(100)
Oct 14 04:46:49 spf0 kernel: hdi: hdi1 hdi2 hdi3 hdi4 < hdi5 >
Oct 14 04:46:49 spf0 kernel: hdk: max request size: 128KiB
Oct 14 04:46:49 spf0 kernel: hdk: 80043264 sectors (40982 MB) w/2048KiB
Cache, CHS=65535/16/63, UDMA(100)
Oct 14 04:46:49 spf0 kernel: hdk: hdk1 hdk2 hdk3 hdk4 < hdk5 >
next prev parent reply other threads:[~2004-11-03 6:57 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <418741EB.3080701@outblaze.com>
[not found] ` <20041102011918.2b453e21.akpm@osdl.org>
[not found] ` <4187478A.1040002@outblaze.com>
[not found] ` <20041102014119.1a6096cc.akpm@osdl.org>
2004-11-02 9:04 ` linux 2.6.9 controller order reordered. was: [Re: linux 2.6.9 still having network code problems] Christopher Chan
2004-11-02 10:07 ` Andrew Morton
2004-11-02 9:21 ` Christopher Chan
2004-11-02 10:26 ` Andrew Morton
2004-11-02 16:40 ` Alan Cox
2004-11-03 6:57 ` Christopher Chan [this message]
2004-11-03 13:00 ` Bartlomiej Zolnierkiewicz
2004-11-03 15:51 ` Christopher Chan
2004-11-03 17:01 ` Bartlomiej Zolnierkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=41888160.5080502@outblaze.com \
--to=cchan@outblaze.com \
--cc=akpm@osdl.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).