Linux version 2.4.27 (root@Sharlie.TfJC) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #33-Christopher R. Thompson Wednesday December 15, 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable) BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data) BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS) BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved) BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) user-defined physical RAM map: user: 0000000000000000 - 000000000009fc00 (usable) user: 000000000009fc00 - 00000000000a0000 (reserved) user: 00000000000e8000 - 0000000000100000 (reserved) user: 0000000000100000 - 000000003ffb0000 (usable) user: 000000003ffb0000 - 000000003ffc0000 (ACPI data) user: 000000003ffc0000 - 000000003fff0000 (ACPI NVS) user: 000000003fff0000 - 0000000040000000 (reserved) user: 00000000ffb80000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000ff780 hm, page 000ff000 reserved twice. hm, page 00100000 reserved twice. hm, page 000f1000 reserved twice. hm, page 000f2000 reserved twice. On node 0 totalpages: 262064 zone(0): 4096 pages. zone(1): 225280 pages. zone(2): 32688 pages. Intel MultiProcessor Specification v1.1 Virtual Wire compatibility mode. OEM ID: ASUSTeK Product ID: P4P800SE APIC at: 0xFEE00000 I/O APIC #13 Version 32 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs SMP mptable: no processors registered! BIOS bug, MP table errors detected!... ... disabling SMP support. (tell your hw vendor) Kernel command line: mem=1024mb root=/dev/ram1 rw console=tty0 console=ttyS0,115200n8 idebus=66 hdd=ide-scsi BOOT_IMAGE=bzi2427 Found and enabled local APIC! Initializing CPU#0 Detected 3198.620 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 6383.20 BogoMIPS Memory: 1029488k/1048256k available (1099k kernel code, 18380k reserved, 405k data, 108k init, 130752k highmem) Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode cache hash table entries: 65536 (order: 7, 524288 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 65536 (order: 6, 262144 bytes) Page-cache hash table entries: 262144 (order: 8, 1048576 bytes) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 04 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 3198.4972 MHz. ..... host bus clock speed is 199.9060 MHz. cpu: 0, clocks: 1999060, slice: 999530 CPU0 mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 00:1f.2 Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge PCI: Using IRQ router PIIX/ICH [8086/24d0] at 00:1f.0 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd allocated 32 pages and 32 bhs reserved for the highmem bounces VFS: Disk quotas vdquot_6.5.1 rivafb: RIVA MTRR set to ON Console: switching to colour frame buffer device 80x30 rivafb: PCI nVidia NV10 framebuffer ver 0.9.4 (GeForce2-MX, 64MB @ 0xE8000000) pty: 2048 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10f Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 10240K size 1024 blocksize Linux video capture interface: v1.00 Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 4089k freed VFS: Mounted root (ext2 filesystem). Red Hat nash version 3.4.28 starting Mounting /SCSI subsystem driver Revision: 1.00 proc filesystem Installing ide modules Installing scsi modules scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs blk: queue f7eca594, I/O limit 4095Mb (mask 0xffffffff) (scsi0:A:0): 10.000MB/s transfers (10.000MHz, offset 15) Vendor: SEAGATE Model: ST15230W Rev: 0298 Type: Direct-Access ANSI SCSI revision: 02 blk: queue f7eca694, I/O limit 4095Mb (mask 0xffffffff) (scsi0:A:1): 10.000MB/s transfers (10.000MHz, offset 15) Vendor: SEAGATE Model: ST15230W Rev: 0298 Type: Direct-Access ANSI SCSI revision: 02 blk: queue f7eca794, I/O limit 4095Mb (mask 0xffffffff) scsi0:A:0:0: Tagged Queuing enabled. Depth 32 scsi0:A:1:0: Tagged Queuing enabled. Depth 32 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0 SCSI device sda: 8386733 512-byte hdwr sectors (4294 MB) Partition check: sda: sda1 sda2 sda3 SCSI device sdb: 8386733 512-byte hdwr sectors (4294 MB) sdb: sdb1 sdb2 Installing libata ata_piix: combined mode detected ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xFC00 irq 14 kernel BUG at highmem.c:166! invalid operand: 0000 CPU: 0 EIP: 0010:[] Not tainted EFLAGS: 00010246 eax: 00000000 ebx: f71b1078 ecx: 00000000 edx: f71b1570 esi: 00000000 edi: 00000000 ebp: c1c34000 esp: c1c35f68 ds: 0018 es: 0018 ss: 0018 Process keventd (pid: 2, stackpage=c1c35000) Stack: f71b1078 fd85f9bb f71b1078 c1c35f84 c1c35f84 c011f04a f71b1078 f71b15c4 f71b15c4 c1c34560 c1c34570 c0127b53 c023a090 c1c35fb0 00000000 c1c34560 c1c34570 c1c34000 00000001 00000000 0000001b 00010000 00000000 00000700 Call Trace: [] [] [] [] [] [] [] Code: 0f 0b a6 00 b3 e8 21 c0 05 00 00 80 00 ba a0 ab 2a c0 c1 e8