* Re: SATA hotplug status (sii3114)
[not found] <41E8292A.40302@dot21rts.com>
@ 2005-01-14 22:09 ` Jeff Garzik
2005-01-14 22:27 ` Andy Helten
0 siblings, 1 reply; 3+ messages in thread
From: Jeff Garzik @ 2005-01-14 22:09 UTC (permalink / raw)
To: Andy Helten; +Cc: linux-kernel, linux-ide@vger.kernel.org
Andy Helten wrote:
> Hello,
>
> Can anyone tell me the current status of hotplug support? The SATA web
> site says only this:
>
>> libata does not support hotplug... yet.
>
>
>
> Is there a plan or design for adding hotplug support? Can anyone point
> me to any discussions on this matter. I am new to Linux kernel
> development, but I have searched the archives and found nothing very
> helpful (except for the mention of the echo commands I tried below).
> There could be a simple solution that is evading me, but I've looked for
> two days now without much success.
There's a plan but no code yet. :)
linux-ide@vger.kernel.org is where this stuff gets discussed (though
there's nothing on there recently about hotplug).
Jeff
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: SATA hotplug status (sii3114)
2005-01-14 22:09 ` SATA hotplug status (sii3114) Jeff Garzik
@ 2005-01-14 22:27 ` Andy Helten
2005-01-14 22:28 ` Jeff Garzik
0 siblings, 1 reply; 3+ messages in thread
From: Andy Helten @ 2005-01-14 22:27 UTC (permalink / raw)
To: Jeff Garzik; +Cc: linux-ide@vger.kernel.org
Jeff Garzik wrote:
> Andy Helten wrote:
>
>> Hello,
>>
>> Can anyone tell me the current status of hotplug support? The SATA
>> web site says only this:
>>
>>> libata does not support hotplug... yet.
>>
>>
>> Is there a plan or design for adding hotplug support? Can anyone
>> point me to any discussions on this matter. I am new to Linux kernel
>> development, but I have searched the archives and found nothing very
>> helpful (except for the mention of the echo commands I tried below).
>> There could be a simple solution that is evading me, but I've looked
>> for two days now without much success.
>
>
>
> There's a plan but no code yet. :)
>
> linux-ide@vger.kernel.org is where this stuff gets discussed (though
> there's nothing on there recently about hotplug).
>
> Jeff
>
Can you share the plan with me (pdf, email archive, or web page)? I've
been tasked with adding hotplug support for the system I mention in my
original email. Soooo, it is really just a matter of whether it will be
a custom hack job or something more generic that could benefit more people.
Thanks,
Andy
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: SATA hotplug status (sii3114)
2005-01-14 22:27 ` Andy Helten
@ 2005-01-14 22:28 ` Jeff Garzik
0 siblings, 0 replies; 3+ messages in thread
From: Jeff Garzik @ 2005-01-14 22:28 UTC (permalink / raw)
To: Andy Helten; +Cc: linux-ide@vger.kernel.org
Andy Helten wrote:
> Can you share the plan with me (pdf, email archive, or web page)? I've
> been tasked with adding hotplug support for the system I mention in my
> original email. Soooo, it is really just a matter of whether it will be
> a custom hack job or something more generic that could benefit more people.
<shrug> Just "use SCSI infrastructure such as
scsi_{add,remove}_device() to facilitate hotplug"
Jeff
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2005-01-14 22:28 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <41E8292A.40302@dot21rts.com>
2005-01-14 22:09 ` SATA hotplug status (sii3114) Jeff Garzik
2005-01-14 22:27 ` Andy Helten
2005-01-14 22:28 ` Jeff Garzik
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).