* [RFT 2.6.11-rc2-bk10] libata (SATA) driver update
@ 2005-02-02 9:06 Jeff Garzik
0 siblings, 0 replies; only message in thread
From: Jeff Garzik @ 2005-02-02 9:06 UTC (permalink / raw)
To: linux-ide@vger.kernel.org; +Cc: Linux Kernel, Alan Cox, Andrew Chew
[-- Attachment #1: Type: text/plain, Size: 159 bytes --]
Mainly for testing by Promise and nVIDIA users, but also includes a fix
for a few lesser-used SCSI commands (that affect all SATA users).
See attached...
[-- Attachment #2: changelog.txt --]
[-- Type: text/plain, Size: 696 bytes --]
BK users:
bk pull bk://gkernel.bkbits.net/libata-2.6
This will update the following files:
drivers/scsi/libata-core.c | 91 ++++++++++++++++++++++++++++++++++++++++++--
drivers/scsi/libata-scsi.c | 8 +--
drivers/scsi/sata_nv.c | 45 ++++++++++++++++-----
drivers/scsi/sata_promise.c | 12 ++++-
4 files changed, 135 insertions(+), 21 deletions(-)
through these ChangeSets:
Albert Lee:
o [libata] SCSI-to-ATA translation fixes
Andrew Chew:
o sata_nv: enable generic class support for future NVIDIA SATA
Jeff Garzik:
o [libata sata_promise] support Promise SATAII TX2/TX4 cards
o [libata] Remove CDROM drive from PATA DMA blacklist
o [libata] add DMA blacklist
[-- Attachment #3: patch --]
[-- Type: text/plain, Size: 8865 bytes --]
diff -Nru a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
--- a/drivers/scsi/libata-core.c 2005-02-02 04:02:11 -05:00
+++ b/drivers/scsi/libata-core.c 2005-02-02 04:02:11 -05:00
@@ -1700,6 +1700,69 @@
DPRINTK("EXIT\n");
}
+static void ata_pr_blacklisted(struct ata_port *ap, struct ata_device *dev)
+{
+ printk(KERN_WARNING "ata%u: dev %u is on DMA blacklist, disabling DMA\n",
+ ap->id, dev->devno);
+}
+
+static const char * ata_dma_blacklist [] = {
+ "WDC AC11000H",
+ "WDC AC22100H",
+ "WDC AC32500H",
+ "WDC AC33100H",
+ "WDC AC31600H",
+ "WDC AC32100H",
+ "WDC AC23200L",
+ "Compaq CRD-8241B",
+ "CRD-8400B",
+ "CRD-8480B",
+ "CRD-8482B",
+ "CRD-84",
+ "SanDisk SDP3B",
+ "SanDisk SDP3B-64",
+ "SANYO CD-ROM CRD",
+ "HITACHI CDR-8",
+ "HITACHI CDR-8335",
+ "HITACHI CDR-8435",
+ "Toshiba CD-ROM XM-6202B",
+ "CD-532E-A",
+ "E-IDE CD-ROM CR-840",
+ "CD-ROM Drive/F5A",
+ "WPI CDD-820",
+ "SAMSUNG CD-ROM SC-148C",
+ "SAMSUNG CD-ROM SC",
+ "SanDisk SDP3B-64",
+ "SAMSUNG CD-ROM SN-124",
+ "ATAPI CD-ROM DRIVE 40X MAXIMUM",
+ "_NEC DV5800A",
+};
+
+static int ata_dma_blacklisted(struct ata_port *ap, struct ata_device *dev)
+{
+ unsigned char model_num[40];
+ char *s;
+ unsigned int len;
+ int i;
+
+ ata_dev_id_string(dev->id, model_num, ATA_ID_PROD_OFS,
+ sizeof(model_num));
+ s = &model_num[0];
+ len = strnlen(s, sizeof(model_num));
+
+ /* ATAPI specifies that empty space is blank-filled; remove blanks */
+ while ((len > 0) && (s[len - 1] == ' ')) {
+ len--;
+ s[len] = 0;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(ata_dma_blacklist); i++)
+ if (!strncmp(ata_dma_blacklist[i], s, len))
+ return 1;
+
+ return 0;
+}
+
static unsigned int ata_get_mode_mask(struct ata_port *ap, int shift)
{
struct ata_device *master, *slave;
@@ -1712,17 +1775,37 @@
if (shift == ATA_SHIFT_UDMA) {
mask = ap->udma_mask;
- if (ata_dev_present(master))
+ if (ata_dev_present(master)) {
mask &= (master->id[ATA_ID_UDMA_MODES] & 0xff);
- if (ata_dev_present(slave))
+ if (ata_dma_blacklisted(ap, master)) {
+ mask = 0;
+ ata_pr_blacklisted(ap, master);
+ }
+ }
+ if (ata_dev_present(slave)) {
mask &= (slave->id[ATA_ID_UDMA_MODES] & 0xff);
+ if (ata_dma_blacklisted(ap, slave)) {
+ mask = 0;
+ ata_pr_blacklisted(ap, slave);
+ }
+ }
}
else if (shift == ATA_SHIFT_MWDMA) {
mask = ap->mwdma_mask;
- if (ata_dev_present(master))
+ if (ata_dev_present(master)) {
mask &= (master->id[ATA_ID_MWDMA_MODES] & 0x07);
- if (ata_dev_present(slave))
+ if (ata_dma_blacklisted(ap, master)) {
+ mask = 0;
+ ata_pr_blacklisted(ap, master);
+ }
+ }
+ if (ata_dev_present(slave)) {
mask &= (slave->id[ATA_ID_MWDMA_MODES] & 0x07);
+ if (ata_dma_blacklisted(ap, slave)) {
+ mask = 0;
+ ata_pr_blacklisted(ap, slave);
+ }
+ }
}
else if (shift == ATA_SHIFT_PIO) {
mask = ap->pio_mask;
diff -Nru a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
--- a/drivers/scsi/libata-scsi.c 2005-02-02 04:02:11 -05:00
+++ b/drivers/scsi/libata-scsi.c 2005-02-02 04:02:11 -05:00
@@ -498,9 +498,9 @@
tf->nsect = n_sect & 0xff;
- tf->hob_lbah = (sect >> 16) & 0xff;
- tf->hob_lbam = (sect >> 8) & 0xff;
- tf->hob_lbal = sect & 0xff;
+ tf->lbah = (sect >> 16) & 0xff;
+ tf->lbam = (sect >> 8) & 0xff;
+ tf->lbal = sect & 0xff;
return 0;
}
@@ -600,7 +600,7 @@
return 1;
/* stores LBA27:24 in lower 4 bits of device reg */
- tf->device |= scsicmd[2];
+ tf->device |= scsicmd[6];
qc->nsect = scsicmd[13];
}
diff -Nru a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c
--- a/drivers/scsi/sata_nv.c 2005-02-02 04:02:11 -05:00
+++ b/drivers/scsi/sata_nv.c 2005-02-02 04:02:11 -05:00
@@ -20,6 +20,10 @@
* If you do not delete the provisions above, a recipient may use your
* version of this file under either the OSL or the GPL.
*
+ * 0.06
+ * - Added generic SATA support by using a pci_device_id that filters on
+ * the IDE storage class code.
+ *
* 0.03
* - Fixed a bug where the hotplug handlers for non-CK804/MCP04 were using
* mmio_base, which is only set for the CK804/MCP04 case.
@@ -44,7 +48,7 @@
#include <linux/libata.h>
#define DRV_NAME "sata_nv"
-#define DRV_VERSION "0.5"
+#define DRV_VERSION "0.6"
#define NV_PORTS 2
#define NV_PIO_MASK 0x1f
@@ -108,6 +112,7 @@
enum nv_host_type
{
+ GENERIC,
NFORCE2,
NFORCE3,
CK804
@@ -128,6 +133,9 @@
PCI_ANY_ID, PCI_ANY_ID, 0, 0, CK804 },
{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, CK804 },
+ { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
+ PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_STORAGE_IDE<<8, 0xffff00, GENERIC },
{ 0, } /* terminate list */
};
@@ -136,7 +144,6 @@
struct nv_host_desc
{
enum nv_host_type host_type;
- unsigned long host_flags;
void (*enable_hotplug)(struct ata_probe_ent *probe_ent);
void (*disable_hotplug)(struct ata_host_set *host_set);
void (*check_hotplug)(struct ata_host_set *host_set);
@@ -144,21 +151,24 @@
};
static struct nv_host_desc nv_device_tbl[] = {
{
+ .host_type = GENERIC,
+ .enable_hotplug = NULL,
+ .disable_hotplug= NULL,
+ .check_hotplug = NULL,
+ },
+ {
.host_type = NFORCE2,
- .host_flags = 0x00000000,
.enable_hotplug = nv_enable_hotplug,
.disable_hotplug= nv_disable_hotplug,
.check_hotplug = nv_check_hotplug,
},
{
.host_type = NFORCE3,
- .host_flags = 0x00000000,
.enable_hotplug = nv_enable_hotplug,
.disable_hotplug= nv_disable_hotplug,
.check_hotplug = nv_check_hotplug,
},
{ .host_type = CK804,
- .host_flags = NV_HOST_FLAGS_SCR_MMIO,
.enable_hotplug = nv_enable_hotplug_ck804,
.disable_hotplug= nv_disable_hotplug_ck804,
.check_hotplug = nv_check_hotplug_ck804,
@@ -168,6 +178,7 @@
struct nv_host
{
struct nv_host_desc *host_desc;
+ unsigned long host_flags;
};
static struct pci_driver nv_pci_driver = {
@@ -284,8 +295,8 @@
if (sc_reg > SCR_CONTROL)
return 0xffffffffU;
- if (host->host_desc->host_flags & NV_HOST_FLAGS_SCR_MMIO)
- return readl(ap->ioaddr.scr_addr + (sc_reg * 4));
+ if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO)
+ return readl((void*)ap->ioaddr.scr_addr + (sc_reg * 4));
else
return inl(ap->ioaddr.scr_addr + (sc_reg * 4));
}
@@ -298,8 +309,8 @@
if (sc_reg > SCR_CONTROL)
return;
- if (host->host_desc->host_flags & NV_HOST_FLAGS_SCR_MMIO)
- writel(val, ap->ioaddr.scr_addr + (sc_reg * 4));
+ if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO)
+ writel(val, (void*)ap->ioaddr.scr_addr + (sc_reg * 4));
else
outl(val, ap->ioaddr.scr_addr + (sc_reg * 4));
}
@@ -322,6 +333,14 @@
struct ata_port_info *ppi;
struct ata_probe_ent *probe_ent;
int rc;
+ u32 bar;
+
+ // Make sure this is a SATA controller by counting the number of bars
+ // (NVIDIA SATA controllers will always have six bars). Otherwise,
+ // it's an IDE controller and we ignore it.
+ for (bar=0; bar<6; bar++)
+ if (pci_resource_start(pdev, bar) == 0)
+ return -ENODEV;
if (!printed_version++)
printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
@@ -352,11 +371,15 @@
if (!host)
goto err_out_free_ent;
+ memset(host, 0, sizeof(struct nv_host));
host->host_desc = &nv_device_tbl[ent->driver_data];
probe_ent->private_data = host;
- if (host->host_desc->host_flags & NV_HOST_FLAGS_SCR_MMIO) {
+ if (pci_resource_flags(pdev, 5) & IORESOURCE_MEM)
+ host->host_flags |= NV_HOST_FLAGS_SCR_MMIO;
+
+ if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO) {
unsigned long base;
probe_ent->mmio_base = ioremap(pci_resource_start(pdev, 5),
@@ -395,7 +418,7 @@
return 0;
err_out_iounmap:
- if (host->host_desc->host_flags & NV_HOST_FLAGS_SCR_MMIO)
+ if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO)
iounmap(probe_ent->mmio_base);
err_out_free_host:
kfree(host);
diff -Nru a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c
--- a/drivers/scsi/sata_promise.c 2005-02-02 04:02:11 -05:00
+++ b/drivers/scsi/sata_promise.c 2005-02-02 04:02:11 -05:00
@@ -156,10 +156,16 @@
board_2037x },
{ PCI_VENDOR_ID_PROMISE, 0x3376, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_2037x },
+ { PCI_VENDOR_ID_PROMISE, 0x3d75, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_2037x },
+
{ PCI_VENDOR_ID_PROMISE, 0x3318, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_20319 },
{ PCI_VENDOR_ID_PROMISE, 0x3319, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_20319 },
+ { PCI_VENDOR_ID_PROMISE, 0x3d18, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_20319 },
+
{ } /* terminate list */
};
@@ -406,9 +412,11 @@
return IRQ_NONE;
}
- spin_lock(&host_set->lock);
+ spin_lock(&host_set->lock);
+
+ writel(mask, mmio_base + PDC_INT_SEQMASK);
- for (i = 0; i < host_set->n_ports; i++) {
+ for (i = 0; i < host_set->n_ports; i++) {
VPRINTK("port %u\n", i);
ap = host_set->ports[i];
tmp = mask & (1 << (i + 1));
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2005-02-02 9:07 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-02-02 9:06 [RFT 2.6.11-rc2-bk10] libata (SATA) driver update Jeff Garzik
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).