From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?ISO-8859-1?Q?Dieter_St=FCken?= Subject: sata coldplug? Date: Tue, 15 Feb 2005 18:48:01 +0100 Message-ID: <421235D1.60501@conterra.de> References: <420D5FAE.7040109@linux.it> <20050212155420.GA13468@harddisk-recovery.com> <170b0d7e63345e9b7dba9341a87a8a01@club-internet.fr> <20050213150102.GB13468@harddisk-recovery.com> <353ee8ef7c34573b3e1322ba7502c529@club-internet.fr> <42122859.9060609@pobox.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: QUOTED-PRINTABLE Received: from vvv.conterra.de ([212.124.44.162]:7377 "EHLO conterra.de") by vger.kernel.org with ESMTP id S261635AbVBORsF (ORCPT ); Tue, 15 Feb 2005 12:48:05 -0500 Received: from localhost (unknown [127.0.0.1]) by conterra.de (-) with ESMTP id E9F251C88E8 for ; Tue, 15 Feb 2005 18:48:03 +0100 (CET) In-Reply-To: <42122859.9060609@pobox.com> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: linux-ide@vger.kernel.org Jeff Garzik wrote: > Seems like the hotplug code is triggering.... apropos: will "coldplug" be possible some day? The FAQ says: ... some SATA controllers will never support hotplug I never want to relay on any kind of "hotplug", but may be I want to drop some drive from the system, after an regular umount; or I want to put in some additional disk while the system is running. This would be very usefull for LVM, too. I found some hints about how to to do that for SCSI disks, but this did not work properly for SATA :( Will/is it possible for SATA, too? Dieter. --=20 Dieter St=FCken, con terra GmbH, M=FCnster stueken@conterra.de http://www.conterra.de/ (0)251-7474-501