* resend: attachment from previous message
@ 2005-02-22 21:27 Winstel, Drew
2005-02-22 21:58 ` Jeff Garzik
0 siblings, 1 reply; 2+ messages in thread
From: Winstel, Drew @ 2005-02-22 21:27 UTC (permalink / raw)
To: Linux-Ide (E-mail)
[-- Attachment #1: Type: text/plain, Size: 856 bytes --]
My apologies go out to anyone whose email server
rejected my previous email due to my attachment not
having an extension.
Here's the text of the body again for reference:
Albert,
Thanks for the driver. I am not sure whether you are
correct about the PLL being initialized (I don't know
enough about the internals to say for certain), but I
have attached the dmesg output from 2.6.10 compiled
with your patch and one other change to libata.h--inserted
at line 342:
int (*check_atapi_dma) (struct ata_queued_cmd *qc);
This was done entirely so it would compile cleanly. I
have yet to test ATAPI devices on it.
However, the good news is that all eight drives have been
detected and configured at UDMA 5. I will do the stress
tests on the drive overnight and let you know how things
work out.
Thanks again,
Drew
[-- Attachment #2: dmesgoutput.txt --]
[-- Type: text/plain, Size: 32440 bytes --]
Linux version 2.6.10 (root@vets6.localdomain) (gcc version 3.2.3 20030502 (Red Hat Linux 3.2.3-20)) #2 Tue Feb 22 14:11:21 CST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
255MB LOWMEM available.
On node 0 totalpages: 65520
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 61424 pages, LIFO batch:14
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 Nvidia ) @ 0x000f6b60
ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x0fff3000
ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x0fff3040
ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x0fff75c0
ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
Built 1 zonelists
Kernel command line: ro root=/dev/hda8 LABEL=/ vga=792 video=vesafb:1024x768@72,ywrap,mtrr
Initializing CPU#0
CPU 0 irqstacks, hard=c04a6000 soft=c04a5000
PID hash table entries: 1024 (order: 10, 16384 bytes)
Detected 1243.452 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 254932k/262080k available (2437k kernel code, 6580k reserved, 1098k data, 172k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 2449.40 BogoMIPS (lpj=1224704)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0e00)
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfab70, last bus=3
PCI: Using configuration type 1
ACPI: Subsystem revision 20041105
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: nForce2 C1 Halt Disconnect fixup
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 16 devices
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically. If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device(). As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior. If this argument makes the device work again,
** please email the output of "lspci" to bjorn.helgaas@hp.com
** so I can fix the driver.
pnp: 00:00: ioport range 0x1000-0x107f could not be reserved
pnp: 00:00: ioport range 0x1080-0x10ff has been reserved
pnp: 00:00: ioport range 0x1400-0x147f has been reserved
pnp: 00:00: ioport range 0x1480-0x14ff could not be reserved
pnp: 00:00: ioport range 0x1800-0x187f has been reserved
pnp: 00:00: ioport range 0x1880-0x18ff has been reserved
pnp: 00:01: ioport range 0x1c00-0x1c3f has been reserved
pnp: 00:01: ioport range 0x2000-0x203f has been reserved
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
audit(1109081571.705:0): initialized
vesafb: framebuffer at 0xd0000000, mapped to 0xd0880000, using 6144k, total 131072k
vesafb: mode is 1024x768x32, linelength=4096, pages=1
vesafb: protected mode interface info at c000:f090
vesafb: pmi: set display start = c00cf0c6, set palette = c00cf130
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: ywrap using protected mode interface, yres_virtual=1536
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
fb1: VGA16 VGA frame buffer device
ACPI: Power Button (FF) [PWRF]
lp: driver loaded but no devices found
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected NVIDIA nForce2 chipset
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: AGP aperture is 64M @ 0xd8000000
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
elevator: using anticipatory as default io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
loop: loaded (max 8 devices)
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.30.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:04.0 to 64
eth0: forcedeth.c: subsystem: 01458:e000 bound to 0000:00:04.0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE2: IDE controller at PCI slot 0000:00:09.0
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: TOSHIBA MK4019GAX, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: DVD-ROM DDU1621, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: max request size: 128KiB
hda: 78140160 sectors (40007 MB), CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 < hda5 hda6 hda7 hda8 >
QLogic Fibre Channel HBA Driver (c0299ec0)
ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX as device
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: SONY Model: DVD-ROM DDU1621 Rev: S4.0
Type: CD-ROM ANSI SCSI revision: 02
libata version 1.10 loaded.
pata_pdc2027x version 0.56
ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI interrupt 0000:01:07.0[A] -> GSI 11 (level, low) -> IRQ 11
pdc_detect_pll_input_clock: ctr0[DA] ctr1[B] ctr2 [0] ctr3 [7C]
pdc_detect_pll_input_clock: scr1[E]
pdc_detect_pll_input_clock: ctr0[6E] ctr1[4B] ctr2 [FF] ctr3 [7B]
pdc_detect_pll_input_clock: scr1[4E]
pdc_detect_pll_input_clock: start[1040190426] end[1040173934]
pdc_detect_pll_input_clock: PLL input clock[16492000]Hz
pata_pdc2027x: PLL input clock 16492 kHz
pdc_adjust_pll: pout_required is 133333333
pdc_adjust_pll: pll_ctl[57][D]
pdc_adjust_pll: F[119] R[13] ratio*1000[8084]
pdc_adjust_pll: Writing pll_ctl[77][D]
pdc_adjust_pll: pll_ctl[77][D]
ata1: PATA max UDMA/133 cmd 0x3C00 ctl 0x4002 bmdma 0x4C00 irq 11
ata2: PATA max UDMA/133 cmd 0x4400 ctl 0x4802 bmdma 0x4C08 irq 11
pdc_get_indexed_reg: Get index reg4[52]
pdc_get_indexed_reg: Get index regB[80]
pdc2027x_cbl_detect: No cable or 80-conductor cable on port 0
ata1: dev 0 cfg 49:2f00 82:7c6b 83:5908 84:4003 85:7c68 86:1808 87:4003 88:203f
ata1: dev 0 ATA, max UDMA/100, 78140160 sectors:
pdc2027x_set_piomode: adev->pio_mode[C]
pdc2027x_set_piomode: Set pio regs...
pdc_set_indexed_reg: Set index regC[23]
pdc_set_indexed_reg: Set index regD[9]
pdc_set_indexed_reg: Set index reg13[25]
pdc2027x_set_piomode: Set pio regs done
pdc2027x_set_piomode: Set to pio mode[4]
pdc2027x_set_dmamode: Set udma regs...
pdc_set_indexed_reg: Set index reg10[1A]
pdc_set_indexed_reg: Set index reg11[2]
pdc_set_indexed_reg: Set index reg12[CB]
pdc2027x_set_dmamode: Set udma regs done
pdc2027x_set_dmamode: Set to udma mode[5]
ata1: dev 0 configured for UDMA/100
pdc2027x_set_piomode: adev->pio_mode[C]
pdc2027x_set_piomode: Set pio regs...
pdc_set_indexed_reg: Set index regC[23]
pdc_set_indexed_reg: Set index regD[9]
pdc_set_indexed_reg: Set index reg13[25]
pdc2027x_set_piomode: Set pio regs done
pdc2027x_set_piomode: Set to pio mode[4]
pdc2027x_set_dmamode: Set udma regs...
pdc_set_indexed_reg: Set index reg10[1A]
pdc_set_indexed_reg: Set index reg11[2]
pdc_set_indexed_reg: Set index reg12[CB]
pdc2027x_set_dmamode: Set udma regs done
pdc2027x_set_dmamode: Set to udma mode[5]
scsi1 : pata_pdc2027x
pdc_get_indexed_reg: Get index reg4[52]
pdc_get_indexed_reg: Get index regB[80]
pdc2027x_cbl_detect: No cable or 80-conductor cable on port 1
ata2: dev 0 cfg 49:2f00 82:7c6b 83:5908 84:4003 85:7c68 86:1808 87:4003 88:203f
ata2: dev 0 ATA, max UDMA/100, 78140160 sectors:
pdc2027x_set_piomode: adev->pio_mode[C]
pdc2027x_set_piomode: Set pio regs...
pdc_set_indexed_reg: Set index regC[23]
pdc_set_indexed_reg: Set index regD[9]
pdc_set_indexed_reg: Set index reg13[25]
pdc2027x_set_piomode: Set pio regs done
pdc2027x_set_piomode: Set to pio mode[4]
pdc2027x_set_dmamode: Set udma regs...
pdc_set_indexed_reg: Set index reg10[1A]
pdc_set_indexed_reg: Set index reg11[2]
pdc_set_indexed_reg: Set index reg12[CB]
pdc2027x_set_dmamode: Set udma regs done
pdc2027x_set_dmamode: Set to udma mode[5]
ata2: dev 0 configured for UDMA/100
pdc2027x_set_piomode: adev->pio_mode[C]
pdc2027x_set_piomode: Set pio regs...
pdc_set_indexed_reg: Set index regC[23]
pdc_set_indexed_reg: Set index regD[9]
pdc_set_indexed_reg: Set index reg13[25]
pdc2027x_set_piomode: Set pio regs done
pdc2027x_set_piomode: Set to pio mode[4]
pdc2027x_set_dmamode: Set udma regs...
pdc_set_indexed_reg: Set index reg10[1A]
pdc_set_indexed_reg: Set index reg11[2]
pdc_set_indexed_reg: Set index reg12[CB]
pdc2027x_set_dmamode: Set udma regs done
pdc2027x_set_dmamode: Set to udma mode[5]
scsi2 : pata_pdc2027x
Vendor: ATA Model: TOSHIBA MK4019GA Rev: FA00
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: TOSHIBA MK4019GA Rev: FA00
Type: Direct-Access ANSI SCSI revision: 05
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 10
ACPI: PCI interrupt 0000:01:08.0[A] -> GSI 10 (level, low) -> IRQ 10
pdc_detect_pll_input_clock: ctr0[0] ctr1[0] ctr2 [0] ctr3 [0]
pdc_detect_pll_input_clock: scr1[E]
pdc_detect_pll_input_clock: ctr0[94] ctr1[3F] ctr2 [FF] ctr3 [7F]
pdc_detect_pll_input_clock: scr1[4E]
pdc_detect_pll_input_clock: start[0] end[1073725332]
pdc_detect_pll_input_clock: PLL input clock[16492000]Hz
pata_pdc2027x: PLL input clock 16492 kHz
pdc_adjust_pll: pout_required is 133333333
pdc_adjust_pll: pll_ctl[57][D]
pdc_adjust_pll: F[119] R[13] ratio*1000[8084]
pdc_adjust_pll: Writing pll_ctl[77][D]
pdc_adjust_pll: pll_ctl[77][D]
ata3: PATA max UDMA/133 cmd 0x5000 ctl 0x5402 bmdma 0x6000 irq 10
ata4: PATA max UDMA/133 cmd 0x5800 ctl 0x5C02 bmdma 0x6008 irq 10
pdc_get_indexed_reg: Get index reg4[52]
pdc_get_indexed_reg: Get index regB[80]
pdc2027x_cbl_detect: No cable or 80-conductor cable on port 0
ata3: dev 0 cfg 49:2f00 82:7c6b 83:5908 84:4003 85:7c68 86:1808 87:4003 88:203f
ata3: dev 0 ATA, max UDMA/100, 78140160 sectors:
pdc2027x_set_piomode: adev->pio_mode[C]
pdc2027x_set_piomode: Set pio regs...
pdc_set_indexed_reg: Set index regC[23]
pdc_set_indexed_reg: Set index regD[9]
pdc_set_indexed_reg: Set index reg13[25]
pdc2027x_set_piomode: Set pio regs done
pdc2027x_set_piomode: Set to pio mode[4]
pdc2027x_set_dmamode: Set udma regs...
pdc_set_indexed_reg: Set index reg10[1A]
pdc_set_indexed_reg: Set index reg11[2]
pdc_set_indexed_reg: Set index reg12[CB]
pdc2027x_set_dmamode: Set udma regs done
pdc2027x_set_dmamode: Set to udma mode[5]
ata3: dev 0 configured for UDMA/100
pdc2027x_set_piomode: adev->pio_mode[C]
pdc2027x_set_piomode: Set pio regs...
pdc_set_indexed_reg: Set index regC[23]
pdc_set_indexed_reg: Set index regD[9]
pdc_set_indexed_reg: Set index reg13[25]
pdc2027x_set_piomode: Set pio regs done
pdc2027x_set_piomode: Set to pio mode[4]
pdc2027x_set_dmamode: Set udma regs...
pdc_set_indexed_reg: Set index reg10[1A]
pdc_set_indexed_reg: Set index reg11[2]
pdc_set_indexed_reg: Set index reg12[CB]
pdc2027x_set_dmamode: Set udma regs done
pdc2027x_set_dmamode: Set to udma mode[5]
scsi3 : pata_pdc2027x
pdc_get_indexed_reg: Get index reg4[52]
pdc_get_indexed_reg: Get index regB[80]
pdc2027x_cbl_detect: No cable or 80-conductor cable on port 1
ata4: dev 1 cfg 49:2f00 82:7c6b 83:5908 84:4003 85:7c68 86:1808 87:4003 88:203f
ata4: dev 1 ATA, max UDMA/100, 78140160 sectors:
pdc2027x_set_piomode: adev->pio_mode[C]
pdc2027x_set_piomode: Set pio regs...
pdc_set_indexed_reg: Set index reg14[23]
pdc_set_indexed_reg: Set index reg15[9]
pdc_set_indexed_reg: Set index reg1B[25]
pdc2027x_set_piomode: Set pio regs done
pdc2027x_set_piomode: Set to pio mode[4]
pdc2027x_set_dmamode: Set udma regs...
pdc_set_indexed_reg: Set index reg18[1A]
pdc_set_indexed_reg: Set index reg19[2]
pdc_set_indexed_reg: Set index reg1A[CB]
pdc2027x_set_dmamode: Set udma regs done
pdc2027x_set_dmamode: Set to udma mode[5]
ata4: dev 1 configured for UDMA/100
pdc2027x_set_piomode: adev->pio_mode[C]
pdc2027x_set_piomode: Set pio regs...
pdc_set_indexed_reg: Set index reg14[23]
pdc_set_indexed_reg: Set index reg15[9]
pdc_set_indexed_reg: Set index reg1B[25]
pdc2027x_set_piomode: Set pio regs done
pdc2027x_set_piomode: Set to pio mode[4]
pdc2027x_set_dmamode: Set udma regs...
pdc_set_indexed_reg: Set index reg18[1A]
pdc_set_indexed_reg: Set index reg19[2]
pdc_set_indexed_reg: Set index reg1A[CB]
pdc2027x_set_dmamode: Set udma regs done
pdc2027x_set_dmamode: Set to udma mode[5]
scsi4 : pata_pdc2027x
Vendor: ATA Model: TOSHIBA MK4019GA Rev: FA00
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: TOSHIBA MK4021GA Rev: GA22
Type: Direct-Access ANSI SCSI revision: 05
ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11
ACPI: PCI interrupt 0000:01:09.0[A] -> GSI 11 (level, low) -> IRQ 11
pdc_detect_pll_input_clock: ctr0[0] ctr1[0] ctr2 [0] ctr3 [0]
pdc_detect_pll_input_clock: scr1[E]
pdc_detect_pll_input_clock: ctr0[94] ctr1[3F] ctr2 [FF] ctr3 [7F]
pdc_detect_pll_input_clock: scr1[4E]
pdc_detect_pll_input_clock: start[0] end[1073725332]
pdc_detect_pll_input_clock: PLL input clock[16492000]Hz
pata_pdc2027x: PLL input clock 16492 kHz
pdc_adjust_pll: pout_required is 133333333
pdc_adjust_pll: pll_ctl[58][4D]
pdc_adjust_pll: F[119] R[13] ratio*1000[8084]
pdc_adjust_pll: Writing pll_ctl[77][D]
pdc_adjust_pll: pll_ctl[77][D]
ata5: PATA max UDMA/133 cmd 0x6400 ctl 0x6802 bmdma 0x7400 irq 11
ata6: PATA max UDMA/133 cmd 0x6C00 ctl 0x7002 bmdma 0x7408 irq 11
pdc_get_indexed_reg: Get index reg4[52]
pdc_get_indexed_reg: Get index regB[80]
pdc2027x_cbl_detect: No cable or 80-conductor cable on port 0
ata5: dev 0 cfg 49:2f00 82:7c6b 83:5908 84:4003 85:7c68 86:1808 87:4003 88:003f
ata5: dev 0 ATA, max UDMA/100, 78140160 sectors:
pdc2027x_set_piomode: adev->pio_mode[C]
pdc2027x_set_piomode: Set pio regs...
pdc_set_indexed_reg: Set index regC[23]
pdc_set_indexed_reg: Set index regD[9]
pdc_set_indexed_reg: Set index reg13[25]
pdc2027x_set_piomode: Set pio regs done
pdc2027x_set_piomode: Set to pio mode[4]
pdc2027x_set_dmamode: Set udma regs...
pdc_set_indexed_reg: Set index reg10[1A]
pdc_set_indexed_reg: Set index reg11[2]
pdc_set_indexed_reg: Set index reg12[CB]
pdc2027x_set_dmamode: Set udma regs done
pdc2027x_set_dmamode: Set to udma mode[5]
ata5: dev 0 configured for UDMA/100
pdc2027x_set_piomode: adev->pio_mode[C]
pdc2027x_set_piomode: Set pio regs...
pdc_set_indexed_reg: Set index regC[23]
pdc_set_indexed_reg: Set index regD[9]
pdc_set_indexed_reg: Set index reg13[25]
pdc2027x_set_piomode: Set pio regs done
pdc2027x_set_piomode: Set to pio mode[4]
pdc2027x_set_dmamode: Set udma regs...
pdc_set_indexed_reg: Set index reg10[1A]
pdc_set_indexed_reg: Set index reg11[2]
pdc_set_indexed_reg: Set index reg12[CB]
pdc2027x_set_dmamode: Set udma regs done
pdc2027x_set_dmamode: Set to udma mode[5]
scsi5 : pata_pdc2027x
pdc_get_indexed_reg: Get index reg4[52]
pdc_get_indexed_reg: Get index regB[80]
pdc2027x_cbl_detect: No cable or 80-conductor cable on port 1
ata6: dev 0 cfg 49:2f00 82:7c6b 83:5908 84:4003 85:7c68 86:1808 87:4003 88:003f
ata6: dev 0 ATA, max UDMA/100, 78140160 sectors:
pdc2027x_set_piomode: adev->pio_mode[C]
pdc2027x_set_piomode: Set pio regs...
pdc_set_indexed_reg: Set index regC[23]
pdc_set_indexed_reg: Set index regD[9]
pdc_set_indexed_reg: Set index reg13[25]
pdc2027x_set_piomode: Set pio regs done
pdc2027x_set_piomode: Set to pio mode[4]
pdc2027x_set_dmamode: Set udma regs...
pdc_set_indexed_reg: Set index reg10[1A]
pdc_set_indexed_reg: Set index reg11[2]
pdc_set_indexed_reg: Set index reg12[CB]
pdc2027x_set_dmamode: Set udma regs done
pdc2027x_set_dmamode: Set to udma mode[5]
ata6: dev 0 configured for UDMA/100
pdc2027x_set_piomode: adev->pio_mode[C]
pdc2027x_set_piomode: Set pio regs...
pdc_set_indexed_reg: Set index regC[23]
pdc_set_indexed_reg: Set index regD[9]
pdc_set_indexed_reg: Set index reg13[25]
pdc2027x_set_piomode: Set pio regs done
pdc2027x_set_piomode: Set to pio mode[4]
pdc2027x_set_dmamode: Set udma regs...
pdc_set_indexed_reg: Set index reg10[1A]
pdc_set_indexed_reg: Set index reg11[2]
pdc_set_indexed_reg: Set index reg12[CB]
pdc2027x_set_dmamode: Set udma regs done
pdc2027x_set_dmamode: Set to udma mode[5]
scsi6 : pata_pdc2027x
Vendor: ATA Model: TOSHIBA MK4019GA Rev: FA00
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: TOSHIBA MK4019GA Rev: FA00
Type: Direct-Access ANSI SCSI revision: 05
ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 11
ACPI: PCI interrupt 0000:01:0a.0[A] -> GSI 11 (level, low) -> IRQ 11
pdc_detect_pll_input_clock: ctr0[0] ctr1[0] ctr2 [0] ctr3 [0]
pdc_detect_pll_input_clock: scr1[E]
pdc_detect_pll_input_clock: ctr0[93] ctr1[3F] ctr2 [FF] ctr3 [7F]
pdc_detect_pll_input_clock: scr1[4E]
pdc_detect_pll_input_clock: start[0] end[1073725331]
pdc_detect_pll_input_clock: PLL input clock[16493000]Hz
pata_pdc2027x: PLL input clock 16493 kHz
pdc_adjust_pll: pout_required is 133333333
pdc_adjust_pll: pll_ctl[58][4D]
pdc_adjust_pll: F[119] R[13] ratio*1000[8084]
pdc_adjust_pll: Writing pll_ctl[77][D]
pdc_adjust_pll: pll_ctl[77][D]
ata7: PATA max UDMA/133 cmd 0x7800 ctl 0x7C02 bmdma 0x8800 irq 11
ata8: PATA max UDMA/133 cmd 0x8000 ctl 0x8402 bmdma 0x8808 irq 11
pdc_get_indexed_reg: Get index reg4[52]
pdc_get_indexed_reg: Get index regB[80]
pdc2027x_cbl_detect: No cable or 80-conductor cable on port 0
ata7: dev 0 cfg 49:2f00 82:7c6b 83:5908 84:4003 85:7c68 86:1808 87:4003 88:003f
ata7: dev 0 ATA, max UDMA/100, 78140160 sectors:
pdc2027x_set_piomode: adev->pio_mode[C]
pdc2027x_set_piomode: Set pio regs...
pdc_set_indexed_reg: Set index regC[23]
pdc_set_indexed_reg: Set index regD[9]
pdc_set_indexed_reg: Set index reg13[25]
pdc2027x_set_piomode: Set pio regs done
pdc2027x_set_piomode: Set to pio mode[4]
pdc2027x_set_dmamode: Set udma regs...
pdc_set_indexed_reg: Set index reg10[1A]
pdc_set_indexed_reg: Set index reg11[2]
pdc_set_indexed_reg: Set index reg12[CB]
pdc2027x_set_dmamode: Set udma regs done
pdc2027x_set_dmamode: Set to udma mode[5]
ata7: dev 0 configured for UDMA/100
pdc2027x_set_piomode: adev->pio_mode[C]
pdc2027x_set_piomode: Set pio regs...
pdc_set_indexed_reg: Set index regC[23]
pdc_set_indexed_reg: Set index regD[9]
pdc_set_indexed_reg: Set index reg13[25]
pdc2027x_set_piomode: Set pio regs done
pdc2027x_set_piomode: Set to pio mode[4]
pdc2027x_set_dmamode: Set udma regs...
pdc_set_indexed_reg: Set index reg10[1A]
pdc_set_indexed_reg: Set index reg11[2]
pdc_set_indexed_reg: Set index reg12[CB]
pdc2027x_set_dmamode: Set udma regs done
pdc2027x_set_dmamode: Set to udma mode[5]
scsi7 : pata_pdc2027x
pdc_get_indexed_reg: Get index reg4[52]
pdc_get_indexed_reg: Get index regB[80]
pdc2027x_cbl_detect: No cable or 80-conductor cable on port 1
ata8: dev 0 cfg 49:2b00 82:346b 83:5b29 84:4003 85:3468 86:1a09 87:4003 88:003f
ata8: dev 0 ATA, max UDMA/100, 156301488 sectors:
pdc2027x_set_piomode: adev->pio_mode[C]
pdc2027x_set_piomode: Set pio regs...
pdc_set_indexed_reg: Set index regC[23]
pdc_set_indexed_reg: Set index regD[9]
pdc_set_indexed_reg: Set index reg13[25]
pdc2027x_set_piomode: Set pio regs done
pdc2027x_set_piomode: Set to pio mode[4]
pdc2027x_set_dmamode: Set udma regs...
pdc_set_indexed_reg: Set index reg10[1A]
pdc_set_indexed_reg: Set index reg11[2]
pdc_set_indexed_reg: Set index reg12[CB]
pdc2027x_set_dmamode: Set udma regs done
pdc2027x_set_dmamode: Set to udma mode[5]
ata8: dev 0 configured for UDMA/100
pdc2027x_set_piomode: adev->pio_mode[C]
pdc2027x_set_piomode: Set pio regs...
pdc_set_indexed_reg: Set index regC[23]
pdc_set_indexed_reg: Set index regD[9]
pdc_set_indexed_reg: Set index reg13[25]
pdc2027x_set_piomode: Set pio regs done
pdc2027x_set_piomode: Set to pio mode[4]
pdc2027x_set_dmamode: Set udma regs...
pdc_set_indexed_reg: Set index reg10[1A]
pdc_set_indexed_reg: Set index reg11[2]
pdc_set_indexed_reg: Set index reg12[CB]
pdc2027x_set_dmamode: Set udma regs done
pdc2027x_set_dmamode: Set to udma mode[5]
scsi8 : pata_pdc2027x
Vendor: ATA Model: TOSHIBA MK4019GA Rev: FA00
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: FUJITSU MHT2080A Rev: 0021
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
SCSI device sda: drive cache: write back
sda: unknown partition table
Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
SCSI device sdb: 78140160 512-byte hdwr sectors (40008 MB)
SCSI device sdb: drive cache: write back
SCSI device sdb: 78140160 512-byte hdwr sectors (40008 MB)
SCSI device sdb: drive cache: write back
sdb: unknown partition table
Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0
SCSI device sdc: 78140160 512-byte hdwr sectors (40008 MB)
SCSI device sdc: drive cache: write back
SCSI device sdc: 78140160 512-byte hdwr sectors (40008 MB)
SCSI device sdc: drive cache: write back
sdc: unknown partition table
Attached scsi disk sdc at scsi3, channel 0, id 0, lun 0
SCSI device sdd: 78140160 512-byte hdwr sectors (40008 MB)
SCSI device sdd: drive cache: write back
SCSI device sdd: 78140160 512-byte hdwr sectors (40008 MB)
SCSI device sdd: drive cache: write back
sdd: unknown partition table
Attached scsi disk sdd at scsi4, channel 0, id 1, lun 0
SCSI device sde: 78140160 512-byte hdwr sectors (40008 MB)
SCSI device sde: drive cache: write back
SCSI device sde: 78140160 512-byte hdwr sectors (40008 MB)
SCSI device sde: drive cache: write back
sde: unknown partition table
Attached scsi disk sde at scsi5, channel 0, id 0, lun 0
SCSI device sdf: 78140160 512-byte hdwr sectors (40008 MB)
SCSI device sdf: drive cache: write back
SCSI device sdf: 78140160 512-byte hdwr sectors (40008 MB)
SCSI device sdf: drive cache: write back
sdf: unknown partition table
Attached scsi disk sdf at scsi6, channel 0, id 0, lun 0
SCSI device sdg: 78140160 512-byte hdwr sectors (40008 MB)
SCSI device sdg: drive cache: write back
SCSI device sdg: 78140160 512-byte hdwr sectors (40008 MB)
SCSI device sdg: drive cache: write back
sdg: unknown partition table
Attached scsi disk sdg at scsi7, channel 0, id 0, lun 0
SCSI device sdh: 156301488 512-byte hdwr sectors (80026 MB)
SCSI device sdh: drive cache: write back
SCSI device sdh: 156301488 512-byte hdwr sectors (80026 MB)
SCSI device sdh: drive cache: write back
sdh: unknown partition table
Attached scsi disk sdh at scsi8, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 5
Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 0
Attached scsi generic sg2 at scsi2, channel 0, id 0, lun 0, type 0
Attached scsi generic sg3 at scsi3, channel 0, id 0, lun 0, type 0
Attached scsi generic sg4 at scsi4, channel 0, id 1, lun 0, type 0
Attached scsi generic sg5 at scsi5, channel 0, id 0, lun 0, type 0
Attached scsi generic sg6 at scsi6, channel 0, id 0, lun 0, type 0
Attached scsi generic sg7 at scsi7, channel 0, id 0, lun 0, type 0
Attached scsi generic sg8 at scsi8, channel 0, id 0, lun 0, type 0
Fusion MPT base driver 3.01.18
Copyright (c) 1999-2004 LSI Logic Corporation
Fusion MPT SCSI Host driver 3.01.18
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
ip_conntrack version 2.1 (2047 buckets, 16376 max) - 300 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 172k freed
EXT3 FS on hda8, internal journal
Adding 1000400k swap on /dev/hda6. Priority:-1 extents:1
program scsi_unique_id is using a deprecated SCSI ioctl, please convert it to SG_IO
program scsi_unique_id is using a deprecated SCSI ioctl, please convert it to SG_IO
program scsi_unique_id is using a deprecated SCSI ioctl, please convert it to SG_IO
program scsi_unique_id is using a deprecated SCSI ioctl, please convert it to SG_IO
program scsi_unique_id is using a deprecated SCSI ioctl, please convert it to SG_IO
program scsi_unique_id is using a deprecated SCSI ioctl, please convert it to SG_IO
program scsi_unique_id is using a deprecated SCSI ioctl, please convert it to SG_IO
program scsi_unique_id is using a deprecated SCSI ioctl, please convert it to SG_IO
program scsi_unique_id is using a deprecated SCSI ioctl, please convert it to SG_IO
program scsi_unique_id is using a deprecated SCSI ioctl, please convert it to SG_IO
program scsi_unique_id is using a deprecated SCSI ioctl, please convert it to SG_IO
program scsi_unique_id is using a deprecated SCSI ioctl, please convert it to SG_IO
program scsi_unique_id is using a deprecated SCSI ioctl, please convert it to SG_IO
program scsi_unique_id is using a deprecated SCSI ioctl, please convert it to SG_IO
program scsi_unique_id is using a deprecated SCSI ioctl, please convert it to SG_IO
program scsi_unique_id is using a deprecated SCSI ioctl, please convert it to SG_IO
program scsi_unique_id is using a deprecated SCSI ioctl, please convert it to SG_IO
program scsi_unique_id is using a deprecated SCSI ioctl, please convert it to SG_IO
program scsi_unique_id is using a deprecated SCSI ioctl, please convert it to SG_IO
program scsi_unique_id is using a deprecated SCSI ioctl, please convert it to SG_IO
program scsi_unique_id is using a deprecated SCSI ioctl, please convert it to SG_IO
program scsi_unique_id is using a deprecated SCSI ioctl, please convert it to SG_IO
program scsi_unique_id is using a deprecated SCSI ioctl, please convert it to SG_IO
program scsi_unique_id is using a deprecated SCSI ioctl, please convert it to SG_IO
program scsi_unique_id is using a deprecated SCSI ioctl, please convert it to SG_IO
program scsi_unique_id is using a deprecated SCSI ioctl, please convert it to SG_IO
program scsi_unique_id is using a deprecated SCSI ioctl, please convert it to SG_IO
program scsi_unique_id is using a deprecated SCSI ioctl, please convert it to SG_IO
program scsi_unique_id is using a deprecated SCSI ioctl, please convert it to SG_IO
program scsi_unique_id is using a deprecated SCSI ioctl, please convert it to SG_IO
program scsi_unique_id is using a deprecated SCSI ioctl, please convert it to SG_IO
program scsi_unique_id is using a deprecated SCSI ioctl, please convert it to SG_IO
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2005-02-22 21:58 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-02-22 21:27 resend: attachment from previous message Winstel, Drew
2005-02-22 21:58 ` Jeff Garzik
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).