From: Jeff Garzik <jgarzik@pobox.com>
To: "linux-ide@vger.kernel.org" <linux-ide@vger.kernel.org>
Subject: [Fwd: [PATCH] Re: 2.6.11-rc4 libata-core (irq 30: nobody cared!)]
Date: Wed, 23 Feb 2005 21:35:56 -0500 [thread overview]
Message-ID: <421D3D8C.1090709@pobox.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 0 bytes --]
[-- Attachment #2: [PATCH] Re: 2.6.11-rc4 libata-core (irq 30: nobody cared!) --]
[-- Type: message/rfc822, Size: 3982 bytes --]
[-- Attachment #2.1.1: Type: text/plain, Size: 46 bytes --]
Does this patch do anything useful?
Jeff
[-- Attachment #2.1.2: patch --]
[-- Type: text/plain, Size: 2874 bytes --]
===== drivers/scsi/sata_sil.c 1.44 vs edited =====
--- 1.44/drivers/scsi/sata_sil.c 2005-02-17 19:43:51 -05:00
+++ edited/drivers/scsi/sata_sil.c 2005-02-23 21:27:18 -05:00
@@ -65,6 +65,7 @@
static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg);
static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
static void sil_post_set_mode (struct ata_port *ap);
+static void sil_tf_load(struct ata_port *ap, struct ata_taskfile *tf);
static struct pci_device_id sil_pci_tbl[] = {
{ 0x1095, 0x3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
@@ -130,7 +131,7 @@
static struct ata_port_operations sil_ops = {
.port_disable = ata_port_disable,
.dev_config = sil_dev_config,
- .tf_load = ata_tf_load,
+ .tf_load = sil_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
@@ -197,6 +198,69 @@
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, sil_pci_tbl);
MODULE_VERSION(DRV_VERSION);
+
+static void sil_irq_enable(struct ata_port *ap, int disable)
+{
+ void __iomem *mmio = ap->host_set->mmio_base;
+ u32 tmp, new;
+ u32 bit = 1 << (22 + ap->port_no);
+
+ tmp = readl(mmio + SIL_SYSCFG);
+ if (disable)
+ new = tmp | bit;
+ else
+ new = tmp & ~bit;
+ if (new != tmp)
+ writel(new, mmio + SIL_SYSCFG);
+}
+
+static void sil_tf_load(struct ata_port *ap, struct ata_taskfile *tf)
+{
+ struct ata_ioports *ioaddr = &ap->ioaddr;
+ unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
+
+ if (tf->ctl != ap->last_ctl) {
+ sil_irq_enable(ap, tf->ctl & ATA_NIEN);
+ writeb(tf->ctl, (void __iomem *) ap->ioaddr.ctl_addr);
+ ap->last_ctl = tf->ctl;
+ ata_wait_idle(ap);
+ }
+
+ if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
+ writeb(tf->hob_feature, (void __iomem *) ioaddr->feature_addr);
+ writeb(tf->hob_nsect, (void __iomem *) ioaddr->nsect_addr);
+ writeb(tf->hob_lbal, (void __iomem *) ioaddr->lbal_addr);
+ writeb(tf->hob_lbam, (void __iomem *) ioaddr->lbam_addr);
+ writeb(tf->hob_lbah, (void __iomem *) ioaddr->lbah_addr);
+ VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n",
+ tf->hob_feature,
+ tf->hob_nsect,
+ tf->hob_lbal,
+ tf->hob_lbam,
+ tf->hob_lbah);
+ }
+
+ if (is_addr) {
+ writeb(tf->feature, (void __iomem *) ioaddr->feature_addr);
+ writeb(tf->nsect, (void __iomem *) ioaddr->nsect_addr);
+ writeb(tf->lbal, (void __iomem *) ioaddr->lbal_addr);
+ writeb(tf->lbam, (void __iomem *) ioaddr->lbam_addr);
+ writeb(tf->lbah, (void __iomem *) ioaddr->lbah_addr);
+ VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n",
+ tf->feature,
+ tf->nsect,
+ tf->lbal,
+ tf->lbam,
+ tf->lbah);
+ }
+
+ if (tf->flags & ATA_TFLAG_DEVICE) {
+ writeb(tf->device, (void __iomem *) ioaddr->device_addr);
+ VPRINTK("device 0x%X\n", tf->device);
+ }
+
+ ata_wait_idle(ap);
+}
static void sil_post_set_mode (struct ata_port *ap)
{
reply other threads:[~2005-02-24 2:36 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=421D3D8C.1090709@pobox.com \
--to=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).