From: Jeff Garzik <jgarzik@pobox.com>
To: Prakash Punnoor <prakashp@arcor.de>
Cc: linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: 2.6.11-rc5: sata_sil shows drive twice...
Date: Mon, 28 Feb 2005 12:07:01 -0500 [thread overview]
Message-ID: <42234FB5.30500@pobox.com> (raw)
In-Reply-To: <42234B1C.1080500@arcor.de>
Prakash Punnoor wrote:
> hi,
>
> dmesg shows this:
>
>
> -- ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
> ACPI: PCI interrupt 0000:01:0b.0[A] -> GSI 18 (level, high) -> IRQ 18
> ata1: SATA max UDMA/100 cmd 0xF0806080 ctl 0xF080608A bmdma 0xF0806000 irq 18
> ata2: SATA max UDMA/100 cmd 0xF08060C0 ctl 0xF08060CA bmdma 0xF0806008 irq 18
> ata1: dev 0 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3c01 87:4003 88:20ff
> ata1: dev 0 ATA, max UDMA7, 156368016 sectors: lba48
> ata1: dev 0 configured for UDMA/100
> scsi0 : sata_sil
> ata2: no device found (phy stat 00000000)
> scsi1 : sata_sil
> Vendor: ATA Model: SAMSUNG SP0812C Rev: SU10
> Type: Direct-Access ANSI SCSI revision: 05
> SCSI device sda: 156368016 512-byte hdwr sectors (80060 MB)
> SCSI device sda: drive cache: write back
> SCSI device sda: 156368016 512-byte hdwr sectors (80060 MB)
> SCSI device sda: drive cache: write back
> sda: sda1 sda2 sda3 sda4 < sda5 >
> Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
> Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
>
>
> but I only have one physical drive attached. I don't seem to have problems
> though. Yesterday I got an oops, but I don't know whether it is connected. I
> copied it here just in case.
>
> I don't know whether rc4 or earlier showed this beahaviour. I am sure that
> 2.6.10 didn't show it.
The double-output is normal for the SCSI layer, and has occurred on
2.6.10 and previous.
The oops has nothing to do with SATA.
Jeff
prev parent reply other threads:[~2005-02-28 17:07 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-02-28 16:47 2.6.11-rc5: sata_sil shows drive twice Prakash Punnoor
2005-02-28 17:07 ` Jeff Garzik [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=42234FB5.30500@pobox.com \
--to=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=prakashp@arcor.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).