From: "A.E.Lawrence" <A.E.Lawrence@lboro.ac.uk>
To: linux-kernel@vger.kernel.org
Cc: linux-ide@vger.kernel.org
Subject: Primary ide disk inaccessible. 2.6.11.7, x86_64
Date: Sun, 24 Apr 2005 13:12:04 +0100 [thread overview]
Message-ID: <426B8D14.9050408@lboro.ac.uk> (raw)
AMD64 FX, x86_64 architecture, 2.6.11.7 (and earlier)
-----------------------------------------------------
I have 4 sata, 1 scsi and 1 ata hard disks attached to an Asus A8N-SLI.
The primary ata disc (connected to ide0) is inaccessible:
NFORCE-CK804: 0000:00:06.0 (rev a2) UDMA133 controller
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: JTS Corporation CHAMPION MODEL C3000-3A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
But later:-
Probing IDE interface ide5...
hda: max request size: 128KiB
hda: 0 sectors (0 MB) w/256KiB Cache, CHS=5824/16/63, DMA <=======
hda: cache flushes not supported <=======
At some point when I was installing and running some sort of 2.6.n
debian installation kernel, the problem was not present: this disc was
mounted along with the others. But now with all the debian kernels that
I have tried, and my own builds of 2.6.7.11, the disc on ide0 cannot be
used.
There is a report with configurations and dmesg dumps etc here:
http://homepage.ntlworld.com/lawrence_a_e/report.txt
I have turned #DEBUG on in ide-disk.c although I suspect that the
problem is elsewhere.
ael
next reply other threads:[~2005-04-24 12:12 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-04-24 12:12 A.E.Lawrence [this message]
2005-04-24 15:06 ` Primary ide disk inaccessible. 2.6.11.7, x86_64 Daniel Egger
2005-04-24 16:09 ` A.E.Lawrence
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=426B8D14.9050408@lboro.ac.uk \
--to=a.e.lawrence@lboro.ac.uk \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).