* [PATCH] libata: fix use-after-free during driver unload/unplug
@ 2005-05-26 19:28 Jeff Garzik
2005-05-26 21:33 ` Mark Lord
0 siblings, 1 reply; 6+ messages in thread
From: Jeff Garzik @ 2005-05-26 19:28 UTC (permalink / raw)
To: linux-ide@vger.kernel.org, Linux Kernel; +Cc: Jens Axboe, Mark Lord, Al Viro
[-- Attachment #1: Type: text/plain, Size: 612 bytes --]
Jens Axboe pointed out that the iounmap() call in libata was occurring
too early, and some drivers (ahci, probably others) were using ioremap'd
memory after it had been unmapped.
The patch should address that problem by way of improving the libata
driver API:
* move ->host_stop() call after all ->port_stop() calls have occurred.
* create default helper function ata_host_stop(), and move iounmap()
call there.
* add ->host_stop_prewalk() hook, use it in sata_qstor.c (hi Mark).
sata_qstor appears to require the host-stop-before-port-stop ordering
that existed prior to applying the attached patch.
[-- Attachment #2: patch --]
[-- Type: text/plain, Size: 7738 bytes --]
diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c
--- a/drivers/scsi/ahci.c
+++ b/drivers/scsi/ahci.c
@@ -289,6 +289,8 @@ static void ahci_host_stop(struct ata_ho
{
struct ahci_host_priv *hpriv = host_set->private_data;
kfree(hpriv);
+
+ ata_host_stop(host_set);
}
static int ahci_port_start(struct ata_port *ap)
diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c
--- a/drivers/scsi/ata_piix.c
+++ b/drivers/scsi/ata_piix.c
@@ -153,6 +153,7 @@ static struct ata_port_operations piix_p
.port_start = ata_port_start,
.port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
};
static struct ata_port_operations piix_sata_ops = {
@@ -180,6 +181,7 @@ static struct ata_port_operations piix_s
.port_start = ata_port_start,
.port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
};
static struct ata_port_info piix_port_info[] = {
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -3321,6 +3321,13 @@ void ata_port_stop (struct ata_port *ap)
dma_free_coherent(dev, ATA_PRD_TBL_SZ, ap->prd, ap->prd_dma);
}
+void ata_host_stop (struct ata_host_set *host_set)
+{
+ if (host_set->mmio_base)
+ iounmap(host_set->mmio_base);
+}
+
+
/**
* ata_host_remove - Unregister SCSI host structure with upper layers
* @ap: Port to unregister
@@ -3877,10 +3884,9 @@ void ata_pci_remove_one (struct pci_dev
}
free_irq(host_set->irq, host_set);
- if (host_set->ops->host_stop)
- host_set->ops->host_stop(host_set);
- if (host_set->mmio_base)
- iounmap(host_set->mmio_base);
+
+ if (host_set->ops->host_stop_prewalk)
+ host_set->ops->host_stop_prewalk(host_set);
for (i = 0; i < host_set->n_ports; i++) {
ap = host_set->ports[i];
@@ -3899,6 +3905,9 @@ void ata_pci_remove_one (struct pci_dev
scsi_host_put(ap->host);
}
+ if (host_set->ops->host_stop)
+ host_set->ops->host_stop(host_set);
+
kfree(host_set);
pci_release_regions(pdev);
@@ -3996,6 +4005,7 @@ EXPORT_SYMBOL_GPL(ata_chk_err);
EXPORT_SYMBOL_GPL(ata_exec_command);
EXPORT_SYMBOL_GPL(ata_port_start);
EXPORT_SYMBOL_GPL(ata_port_stop);
+EXPORT_SYMBOL_GPL(ata_host_stop);
EXPORT_SYMBOL_GPL(ata_interrupt);
EXPORT_SYMBOL_GPL(ata_qc_prep);
EXPORT_SYMBOL_GPL(ata_bmdma_setup);
diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c
--- a/drivers/scsi/sata_nv.c
+++ b/drivers/scsi/sata_nv.c
@@ -329,6 +329,8 @@ static void nv_host_stop (struct ata_hos
host->host_desc->disable_hotplug(host_set);
kfree(host);
+
+ ata_host_stop(host_set);
}
static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c
--- a/drivers/scsi/sata_promise.c
+++ b/drivers/scsi/sata_promise.c
@@ -122,6 +122,7 @@ static struct ata_port_operations pdc_at
.scr_write = pdc_sata_scr_write,
.port_start = pdc_port_start,
.port_stop = pdc_port_stop,
+ .host_stop = ata_host_stop,
};
static struct ata_port_info pdc_port_info[] = {
diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c
--- a/drivers/scsi/sata_qstor.c
+++ b/drivers/scsi/sata_qstor.c
@@ -111,7 +111,7 @@ static void qs_scr_write (struct ata_por
static int qs_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
static irqreturn_t qs_intr (int irq, void *dev_instance, struct pt_regs *regs);
static int qs_port_start(struct ata_port *ap);
-static void qs_host_stop(struct ata_host_set *host_set);
+static void qs_host_stop_prewalk(struct ata_host_set *host_set);
static void qs_port_stop(struct ata_port *ap);
static void qs_phy_reset(struct ata_port *ap);
static void qs_qc_prep(struct ata_queued_cmd *qc);
@@ -160,7 +160,8 @@ static struct ata_port_operations qs_ata
.scr_write = qs_scr_write,
.port_start = qs_port_start,
.port_stop = qs_port_stop,
- .host_stop = qs_host_stop,
+ .host_stop = ata_host_stop,
+ .host_stop_prewalk = qs_host_stop_prewalk,
.bmdma_stop = qs_bmdma_stop,
.bmdma_status = qs_bmdma_status,
};
@@ -530,7 +531,7 @@ static void qs_port_stop(struct ata_port
ata_port_stop(ap);
}
-static void qs_host_stop(struct ata_host_set *host_set)
+static void qs_host_stop_prewalk(struct ata_host_set *host_set)
{
void __iomem *mmio_base = host_set->mmio_base;
diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c
--- a/drivers/scsi/sata_sil.c
+++ b/drivers/scsi/sata_sil.c
@@ -161,6 +161,7 @@ static struct ata_port_operations sil_op
.scr_write = sil_scr_write,
.port_start = ata_port_start,
.port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
};
static struct ata_port_info sil_port_info[] = {
diff --git a/drivers/scsi/sata_sis.c b/drivers/scsi/sata_sis.c
--- a/drivers/scsi/sata_sis.c
+++ b/drivers/scsi/sata_sis.c
@@ -114,6 +114,7 @@ static struct ata_port_operations sis_op
.scr_write = sis_scr_write,
.port_start = ata_port_start,
.port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
};
static struct ata_port_info sis_port_info = {
diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c
--- a/drivers/scsi/sata_svw.c
+++ b/drivers/scsi/sata_svw.c
@@ -313,6 +313,7 @@ static struct ata_port_operations k2_sat
.scr_write = k2_sata_scr_write,
.port_start = ata_port_start,
.port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
};
static void k2_sata_setup_port(struct ata_ioports *port, unsigned long base)
diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c
--- a/drivers/scsi/sata_sx4.c
+++ b/drivers/scsi/sata_sx4.c
@@ -245,6 +245,8 @@ static void pdc20621_host_stop(struct at
iounmap(dimm_mmio);
kfree(hpriv);
+
+ ata_host_stop(host_set);
}
static int pdc_port_start(struct ata_port *ap)
diff --git a/drivers/scsi/sata_uli.c b/drivers/scsi/sata_uli.c
--- a/drivers/scsi/sata_uli.c
+++ b/drivers/scsi/sata_uli.c
@@ -113,6 +113,7 @@ static struct ata_port_operations uli_op
.port_start = ata_port_start,
.port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
};
static struct ata_port_info uli_port_info = {
diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c
--- a/drivers/scsi/sata_via.c
+++ b/drivers/scsi/sata_via.c
@@ -134,6 +134,7 @@ static struct ata_port_operations svia_s
.port_start = ata_port_start,
.port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
};
static struct ata_port_info svia_port_info = {
diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c
--- a/drivers/scsi/sata_vsc.c
+++ b/drivers/scsi/sata_vsc.c
@@ -230,6 +230,7 @@ static struct ata_port_operations vsc_sa
.scr_write = vsc_sata_scr_write,
.port_start = ata_port_start,
.port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
};
static void __devinit vsc_sata_setup_port(struct ata_ioports *port, unsigned long base)
diff --git a/include/linux/libata.h b/include/linux/libata.h
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -361,6 +361,7 @@ struct ata_port_operations {
int (*port_start) (struct ata_port *ap);
void (*port_stop) (struct ata_port *ap);
+ void (*host_stop_prewalk) (struct ata_host_set *host_set);
void (*host_stop) (struct ata_host_set *host_set);
void (*bmdma_stop) (struct ata_port *ap);
@@ -410,6 +411,7 @@ extern u8 ata_chk_err(struct ata_port *a
extern void ata_exec_command(struct ata_port *ap, struct ata_taskfile *tf);
extern int ata_port_start (struct ata_port *ap);
extern void ata_port_stop (struct ata_port *ap);
+extern void ata_host_stop (struct ata_host_set *host_set);
extern irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs);
extern void ata_qc_prep(struct ata_queued_cmd *qc);
extern int ata_qc_issue_prot(struct ata_queued_cmd *qc);
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH] libata: fix use-after-free during driver unload/unplug
2005-05-26 19:28 [PATCH] libata: fix use-after-free during driver unload/unplug Jeff Garzik
@ 2005-05-26 21:33 ` Mark Lord
2005-05-27 1:21 ` Jeff Garzik
0 siblings, 1 reply; 6+ messages in thread
From: Mark Lord @ 2005-05-26 21:33 UTC (permalink / raw)
To: Jeff Garzik; +Cc: linux-ide@vger.kernel.org, Linux Kernel, Jens Axboe, Al Viro
Hi Jeff!
Jeff Garzik wrote:
>
> * add ->host_stop_prewalk() hook, use it in sata_qstor.c (hi Mark).
> sata_qstor appears to require the host-stop-before-port-stop ordering
> that existed prior to applying the attached patch.
Mmm.. I'm a little bit rusty here, but I don't think qstor
cares about the order, so long as ports are marked with
ATA_FLAG_PORT_DISABLED before invoking port_stop().
I've tried to allow disabling/enabling individual ports
on-the-fly as needed, even though it never really happens
in practice. So host_stop() kills the whole chip, whereas
port_stop() I took to mean just one of the four SATA ports.
Cheers
--
Mark Lord
Real-Time Remedies Inc.
mlord@pobox.com
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] libata: fix use-after-free during driver unload/unplug
2005-05-26 21:33 ` Mark Lord
@ 2005-05-27 1:21 ` Jeff Garzik
2005-05-27 1:32 ` Mark Lord
0 siblings, 1 reply; 6+ messages in thread
From: Jeff Garzik @ 2005-05-27 1:21 UTC (permalink / raw)
To: Mark Lord; +Cc: linux-ide@vger.kernel.org, Linux Kernel, Jens Axboe, Al Viro
Mark Lord wrote:
> Hi Jeff!
>
> Jeff Garzik wrote:
>
>>
>> * add ->host_stop_prewalk() hook, use it in sata_qstor.c (hi Mark).
>> sata_qstor appears to require the host-stop-before-port-stop ordering
>> that existed prior to applying the attached patch.
>
>
> Mmm.. I'm a little bit rusty here, but I don't think qstor
> cares about the order, so long as ports are marked with
> ATA_FLAG_PORT_DISABLED before invoking port_stop().
>
> I've tried to allow disabling/enabling individual ports
> on-the-fly as needed, even though it never really happens
> in practice. So host_stop() kills the whole chip, whereas
> port_stop() I took to mean just one of the four SATA ports.
qstor's ->host_stop() disables global interrupts, and I didn't know if
you really wanted to do that prior to ->port_stop().
I would much prefer to eliminate the ->host_stop_prewalk() hook, and
simply call ->host_stop after all ->port_stop() calls complete, if qstor
doesn't need the pre-walk.
Jeff
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] libata: fix use-after-free during driver unload/unplug
2005-05-27 1:21 ` Jeff Garzik
@ 2005-05-27 1:32 ` Mark Lord
2005-05-27 2:00 ` [PATCH][RFT] " Jeff Garzik
0 siblings, 1 reply; 6+ messages in thread
From: Mark Lord @ 2005-05-27 1:32 UTC (permalink / raw)
To: Jeff Garzik; +Cc: linux-ide@vger.kernel.org, Linux Kernel, Jens Axboe, Al Viro
Jeff Garzik wrote:
>
> qstor's ->host_stop() disables global interrupts, and I didn't know if
> you really wanted to do that prior to ->port_stop().
>
> I would much prefer to eliminate the ->host_stop_prewalk() hook, and
> simply call ->host_stop after all ->port_stop() calls complete, if qstor
> doesn't need the pre-walk.
Ahh.. of course. I must have misread your original.
Yes, sata_qstor generally assumes that host_stop should completely
stop the host from operating.. and thereby expects any port_stop()
calls to happen before host_stop(). So, yup, the changes you have
seem to be useful here.
If we didn't want to have a prewalk() method, then we could hack
sata_qstor to keep a count of active ("non stopped") ports,
and automatically do the global (chip) interrupt disable from
port_stop() whenever the count hits zero.
Cheers
^ permalink raw reply [flat|nested] 6+ messages in thread* [PATCH][RFT] libata: fix use-after-free during driver unload/unplug
2005-05-27 1:32 ` Mark Lord
@ 2005-05-27 2:00 ` Jeff Garzik
2005-05-27 4:18 ` Jeff Garzik
0 siblings, 1 reply; 6+ messages in thread
From: Jeff Garzik @ 2005-05-27 2:00 UTC (permalink / raw)
To: linux-ide@vger.kernel.org, Linux Kernel; +Cc: Mark Lord, Jens Axboe, Al Viro
Attached is the patch I committed, please test.
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH][RFT] libata: fix use-after-free during driver unload/unplug
2005-05-27 2:00 ` [PATCH][RFT] " Jeff Garzik
@ 2005-05-27 4:18 ` Jeff Garzik
0 siblings, 0 replies; 6+ messages in thread
From: Jeff Garzik @ 2005-05-27 4:18 UTC (permalink / raw)
To: linux-ide@vger.kernel.org, Linux Kernel; +Cc: Mark Lord, Jens Axboe, Al Viro
[-- Attachment #1: Type: text/plain, Size: 92 bytes --]
Jeff Garzik wrote:
> Attached is the patch I committed, please test.
Again, with feeling.
[-- Attachment #2: patch --]
[-- Type: text/plain, Size: 6521 bytes --]
diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c
--- a/drivers/scsi/ahci.c
+++ b/drivers/scsi/ahci.c
@@ -289,6 +289,8 @@ static void ahci_host_stop(struct ata_ho
{
struct ahci_host_priv *hpriv = host_set->private_data;
kfree(hpriv);
+
+ ata_host_stop(host_set);
}
static int ahci_port_start(struct ata_port *ap)
diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c
--- a/drivers/scsi/ata_piix.c
+++ b/drivers/scsi/ata_piix.c
@@ -153,6 +153,7 @@ static struct ata_port_operations piix_p
.port_start = ata_port_start,
.port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
};
static struct ata_port_operations piix_sata_ops = {
@@ -180,6 +181,7 @@ static struct ata_port_operations piix_s
.port_start = ata_port_start,
.port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
};
static struct ata_port_info piix_port_info[] = {
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -3321,6 +3321,13 @@ void ata_port_stop (struct ata_port *ap)
dma_free_coherent(dev, ATA_PRD_TBL_SZ, ap->prd, ap->prd_dma);
}
+void ata_host_stop (struct ata_host_set *host_set)
+{
+ if (host_set->mmio_base)
+ iounmap(host_set->mmio_base);
+}
+
+
/**
* ata_host_remove - Unregister SCSI host structure with upper layers
* @ap: Port to unregister
@@ -3877,10 +3884,6 @@ void ata_pci_remove_one (struct pci_dev
}
free_irq(host_set->irq, host_set);
- if (host_set->ops->host_stop)
- host_set->ops->host_stop(host_set);
- if (host_set->mmio_base)
- iounmap(host_set->mmio_base);
for (i = 0; i < host_set->n_ports; i++) {
ap = host_set->ports[i];
@@ -3899,6 +3902,9 @@ void ata_pci_remove_one (struct pci_dev
scsi_host_put(ap->host);
}
+ if (host_set->ops->host_stop)
+ host_set->ops->host_stop(host_set);
+
kfree(host_set);
pci_release_regions(pdev);
@@ -3996,6 +4002,7 @@ EXPORT_SYMBOL_GPL(ata_chk_err);
EXPORT_SYMBOL_GPL(ata_exec_command);
EXPORT_SYMBOL_GPL(ata_port_start);
EXPORT_SYMBOL_GPL(ata_port_stop);
+EXPORT_SYMBOL_GPL(ata_host_stop);
EXPORT_SYMBOL_GPL(ata_interrupt);
EXPORT_SYMBOL_GPL(ata_qc_prep);
EXPORT_SYMBOL_GPL(ata_bmdma_setup);
diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c
--- a/drivers/scsi/sata_nv.c
+++ b/drivers/scsi/sata_nv.c
@@ -329,6 +329,8 @@ static void nv_host_stop (struct ata_hos
host->host_desc->disable_hotplug(host_set);
kfree(host);
+
+ ata_host_stop(host_set);
}
static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c
--- a/drivers/scsi/sata_promise.c
+++ b/drivers/scsi/sata_promise.c
@@ -122,6 +122,7 @@ static struct ata_port_operations pdc_at
.scr_write = pdc_sata_scr_write,
.port_start = pdc_port_start,
.port_stop = pdc_port_stop,
+ .host_stop = ata_host_stop,
};
static struct ata_port_info pdc_port_info[] = {
diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c
--- a/drivers/scsi/sata_qstor.c
+++ b/drivers/scsi/sata_qstor.c
@@ -536,6 +536,8 @@ static void qs_host_stop(struct ata_host
writeb(0, mmio_base + QS_HCT_CTRL); /* disable host interrupts */
writeb(QS_CNFG3_GSRST, mmio_base + QS_HCF_CNFG3); /* global reset */
+
+ ata_host_stop(host_set);
}
static void qs_host_init(unsigned int chip_id, struct ata_probe_ent *pe)
diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c
--- a/drivers/scsi/sata_sil.c
+++ b/drivers/scsi/sata_sil.c
@@ -161,6 +161,7 @@ static struct ata_port_operations sil_op
.scr_write = sil_scr_write,
.port_start = ata_port_start,
.port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
};
static struct ata_port_info sil_port_info[] = {
diff --git a/drivers/scsi/sata_sis.c b/drivers/scsi/sata_sis.c
--- a/drivers/scsi/sata_sis.c
+++ b/drivers/scsi/sata_sis.c
@@ -114,6 +114,7 @@ static struct ata_port_operations sis_op
.scr_write = sis_scr_write,
.port_start = ata_port_start,
.port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
};
static struct ata_port_info sis_port_info = {
diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c
--- a/drivers/scsi/sata_svw.c
+++ b/drivers/scsi/sata_svw.c
@@ -313,6 +313,7 @@ static struct ata_port_operations k2_sat
.scr_write = k2_sata_scr_write,
.port_start = ata_port_start,
.port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
};
static void k2_sata_setup_port(struct ata_ioports *port, unsigned long base)
diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c
--- a/drivers/scsi/sata_sx4.c
+++ b/drivers/scsi/sata_sx4.c
@@ -245,6 +245,8 @@ static void pdc20621_host_stop(struct at
iounmap(dimm_mmio);
kfree(hpriv);
+
+ ata_host_stop(host_set);
}
static int pdc_port_start(struct ata_port *ap)
diff --git a/drivers/scsi/sata_uli.c b/drivers/scsi/sata_uli.c
--- a/drivers/scsi/sata_uli.c
+++ b/drivers/scsi/sata_uli.c
@@ -113,6 +113,7 @@ static struct ata_port_operations uli_op
.port_start = ata_port_start,
.port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
};
static struct ata_port_info uli_port_info = {
diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c
--- a/drivers/scsi/sata_via.c
+++ b/drivers/scsi/sata_via.c
@@ -134,6 +134,7 @@ static struct ata_port_operations svia_s
.port_start = ata_port_start,
.port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
};
static struct ata_port_info svia_port_info = {
diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c
--- a/drivers/scsi/sata_vsc.c
+++ b/drivers/scsi/sata_vsc.c
@@ -230,6 +230,7 @@ static struct ata_port_operations vsc_sa
.scr_write = vsc_sata_scr_write,
.port_start = ata_port_start,
.port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
};
static void __devinit vsc_sata_setup_port(struct ata_ioports *port, unsigned long base)
diff --git a/include/linux/libata.h b/include/linux/libata.h
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -410,6 +410,7 @@ extern u8 ata_chk_err(struct ata_port *a
extern void ata_exec_command(struct ata_port *ap, struct ata_taskfile *tf);
extern int ata_port_start (struct ata_port *ap);
extern void ata_port_stop (struct ata_port *ap);
+extern void ata_host_stop (struct ata_host_set *host_set);
extern irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs);
extern void ata_qc_prep(struct ata_queued_cmd *qc);
extern int ata_qc_issue_prot(struct ata_queued_cmd *qc);
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2005-05-27 4:18 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-05-26 19:28 [PATCH] libata: fix use-after-free during driver unload/unplug Jeff Garzik
2005-05-26 21:33 ` Mark Lord
2005-05-27 1:21 ` Jeff Garzik
2005-05-27 1:32 ` Mark Lord
2005-05-27 2:00 ` [PATCH][RFT] " Jeff Garzik
2005-05-27 4:18 ` Jeff Garzik
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).