From: Jeff Garzik <jgarzik@pobox.com>
To: "linux-ide@vger.kernel.org" <linux-ide@vger.kernel.org>,
Linux Kernel <linux-kernel@vger.kernel.org>
Cc: Mark Lord <liml@rtr.ca>, Jens Axboe <axboe@suse.de>,
Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Subject: [PATCH][RFT] libata: fix use-after-free during driver unload/unplug
Date: Fri, 27 May 2005 00:18:27 -0400 [thread overview]
Message-ID: <42969F93.1030106@pobox.com> (raw)
In-Reply-To: <42967F4A.9030705@pobox.com>
[-- Attachment #1: Type: text/plain, Size: 92 bytes --]
Jeff Garzik wrote:
> Attached is the patch I committed, please test.
Again, with feeling.
[-- Attachment #2: patch --]
[-- Type: text/plain, Size: 6521 bytes --]
diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c
--- a/drivers/scsi/ahci.c
+++ b/drivers/scsi/ahci.c
@@ -289,6 +289,8 @@ static void ahci_host_stop(struct ata_ho
{
struct ahci_host_priv *hpriv = host_set->private_data;
kfree(hpriv);
+
+ ata_host_stop(host_set);
}
static int ahci_port_start(struct ata_port *ap)
diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c
--- a/drivers/scsi/ata_piix.c
+++ b/drivers/scsi/ata_piix.c
@@ -153,6 +153,7 @@ static struct ata_port_operations piix_p
.port_start = ata_port_start,
.port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
};
static struct ata_port_operations piix_sata_ops = {
@@ -180,6 +181,7 @@ static struct ata_port_operations piix_s
.port_start = ata_port_start,
.port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
};
static struct ata_port_info piix_port_info[] = {
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -3321,6 +3321,13 @@ void ata_port_stop (struct ata_port *ap)
dma_free_coherent(dev, ATA_PRD_TBL_SZ, ap->prd, ap->prd_dma);
}
+void ata_host_stop (struct ata_host_set *host_set)
+{
+ if (host_set->mmio_base)
+ iounmap(host_set->mmio_base);
+}
+
+
/**
* ata_host_remove - Unregister SCSI host structure with upper layers
* @ap: Port to unregister
@@ -3877,10 +3884,6 @@ void ata_pci_remove_one (struct pci_dev
}
free_irq(host_set->irq, host_set);
- if (host_set->ops->host_stop)
- host_set->ops->host_stop(host_set);
- if (host_set->mmio_base)
- iounmap(host_set->mmio_base);
for (i = 0; i < host_set->n_ports; i++) {
ap = host_set->ports[i];
@@ -3899,6 +3902,9 @@ void ata_pci_remove_one (struct pci_dev
scsi_host_put(ap->host);
}
+ if (host_set->ops->host_stop)
+ host_set->ops->host_stop(host_set);
+
kfree(host_set);
pci_release_regions(pdev);
@@ -3996,6 +4002,7 @@ EXPORT_SYMBOL_GPL(ata_chk_err);
EXPORT_SYMBOL_GPL(ata_exec_command);
EXPORT_SYMBOL_GPL(ata_port_start);
EXPORT_SYMBOL_GPL(ata_port_stop);
+EXPORT_SYMBOL_GPL(ata_host_stop);
EXPORT_SYMBOL_GPL(ata_interrupt);
EXPORT_SYMBOL_GPL(ata_qc_prep);
EXPORT_SYMBOL_GPL(ata_bmdma_setup);
diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c
--- a/drivers/scsi/sata_nv.c
+++ b/drivers/scsi/sata_nv.c
@@ -329,6 +329,8 @@ static void nv_host_stop (struct ata_hos
host->host_desc->disable_hotplug(host_set);
kfree(host);
+
+ ata_host_stop(host_set);
}
static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c
--- a/drivers/scsi/sata_promise.c
+++ b/drivers/scsi/sata_promise.c
@@ -122,6 +122,7 @@ static struct ata_port_operations pdc_at
.scr_write = pdc_sata_scr_write,
.port_start = pdc_port_start,
.port_stop = pdc_port_stop,
+ .host_stop = ata_host_stop,
};
static struct ata_port_info pdc_port_info[] = {
diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c
--- a/drivers/scsi/sata_qstor.c
+++ b/drivers/scsi/sata_qstor.c
@@ -536,6 +536,8 @@ static void qs_host_stop(struct ata_host
writeb(0, mmio_base + QS_HCT_CTRL); /* disable host interrupts */
writeb(QS_CNFG3_GSRST, mmio_base + QS_HCF_CNFG3); /* global reset */
+
+ ata_host_stop(host_set);
}
static void qs_host_init(unsigned int chip_id, struct ata_probe_ent *pe)
diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c
--- a/drivers/scsi/sata_sil.c
+++ b/drivers/scsi/sata_sil.c
@@ -161,6 +161,7 @@ static struct ata_port_operations sil_op
.scr_write = sil_scr_write,
.port_start = ata_port_start,
.port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
};
static struct ata_port_info sil_port_info[] = {
diff --git a/drivers/scsi/sata_sis.c b/drivers/scsi/sata_sis.c
--- a/drivers/scsi/sata_sis.c
+++ b/drivers/scsi/sata_sis.c
@@ -114,6 +114,7 @@ static struct ata_port_operations sis_op
.scr_write = sis_scr_write,
.port_start = ata_port_start,
.port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
};
static struct ata_port_info sis_port_info = {
diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c
--- a/drivers/scsi/sata_svw.c
+++ b/drivers/scsi/sata_svw.c
@@ -313,6 +313,7 @@ static struct ata_port_operations k2_sat
.scr_write = k2_sata_scr_write,
.port_start = ata_port_start,
.port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
};
static void k2_sata_setup_port(struct ata_ioports *port, unsigned long base)
diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c
--- a/drivers/scsi/sata_sx4.c
+++ b/drivers/scsi/sata_sx4.c
@@ -245,6 +245,8 @@ static void pdc20621_host_stop(struct at
iounmap(dimm_mmio);
kfree(hpriv);
+
+ ata_host_stop(host_set);
}
static int pdc_port_start(struct ata_port *ap)
diff --git a/drivers/scsi/sata_uli.c b/drivers/scsi/sata_uli.c
--- a/drivers/scsi/sata_uli.c
+++ b/drivers/scsi/sata_uli.c
@@ -113,6 +113,7 @@ static struct ata_port_operations uli_op
.port_start = ata_port_start,
.port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
};
static struct ata_port_info uli_port_info = {
diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c
--- a/drivers/scsi/sata_via.c
+++ b/drivers/scsi/sata_via.c
@@ -134,6 +134,7 @@ static struct ata_port_operations svia_s
.port_start = ata_port_start,
.port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
};
static struct ata_port_info svia_port_info = {
diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c
--- a/drivers/scsi/sata_vsc.c
+++ b/drivers/scsi/sata_vsc.c
@@ -230,6 +230,7 @@ static struct ata_port_operations vsc_sa
.scr_write = vsc_sata_scr_write,
.port_start = ata_port_start,
.port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
};
static void __devinit vsc_sata_setup_port(struct ata_ioports *port, unsigned long base)
diff --git a/include/linux/libata.h b/include/linux/libata.h
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -410,6 +410,7 @@ extern u8 ata_chk_err(struct ata_port *a
extern void ata_exec_command(struct ata_port *ap, struct ata_taskfile *tf);
extern int ata_port_start (struct ata_port *ap);
extern void ata_port_stop (struct ata_port *ap);
+extern void ata_host_stop (struct ata_host_set *host_set);
extern irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs);
extern void ata_qc_prep(struct ata_queued_cmd *qc);
extern int ata_qc_issue_prot(struct ata_queued_cmd *qc);
prev parent reply other threads:[~2005-05-27 4:18 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-05-26 19:28 [PATCH] libata: fix use-after-free during driver unload/unplug Jeff Garzik
2005-05-26 21:33 ` Mark Lord
2005-05-27 1:21 ` Jeff Garzik
2005-05-27 1:32 ` Mark Lord
2005-05-27 2:00 ` [PATCH][RFT] " Jeff Garzik
2005-05-27 4:18 ` Jeff Garzik [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=42969F93.1030106@pobox.com \
--to=jgarzik@pobox.com \
--cc=axboe@suse.de \
--cc=liml@rtr.ca \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=viro@parcelfarce.linux.theplanet.co.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).