From mboxrd@z Thu Jan 1 00:00:00 1970 From: sampei02@tiscali.it Subject: SOLVED: DriveStatusError BadCRC Date: Wed, 10 Aug 2005 12:14:35 +0200 Message-ID: <42D7AA47000408B7@mail-5.mail.tiscali.sys> References: <1123494857.22328.52.camel@localhost.localdomain> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Received: from mrqout1.tiscali.it ([195.130.225.11]:18332 "EHLO mrqout1.tiscali.it") by vger.kernel.org with ESMTP id S932554AbVHJKOr convert rfc822-to-8bit (ORCPT ); Wed, 10 Aug 2005 06:14:47 -0400 In-Reply-To: <1123494857.22328.52.camel@localhost.localdomain> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Erik Slagter , linux-ide@vger.kernel.org I replaced 80 wire flat cable with another 40 wire cable. In this way I have no errors but now UDMA mode is set to 2 value. I'm sure that MOTHERBOARD supports UDMA ATA/33/66/100 BUS IDE ports. What do you think ? >-- Messaggio Originale -- >Subject: Re: DriveStatusError BadCRC >From: Erik Slagter >To: linux-ide@vger.kernel.org >Date: Mon, 08 Aug 2005 11:54:17 +0200 > > >On Sun, 2005-08-07 at 08:38 -0600, Eric D. Mudama wrote: >> 51/84 indicates the crc failed on the incoming write data from your >> system. These failures should be very rare (on PATA), but the bumme= r >> is they don't have anything to do with bad blocks on the media or >> degrading heads... >>=20 >> What is the temperature like inside your case? What host adapter ar= e >> you using? How many drives in the system? > >I'd suggest trying another cable... And also a lower UDMA setting. > >Allegato: signature.asc > __________________________________________________________________ TISCALI ADSL 1.25 MEGA Solo con Tiscali Adsl navighi senza limiti e telefoni senza canone Tele= com a partire da 19,95 Euro/mese. Attivala entro il 31 agosto, il primo MESE =E8 GRATIS! CLICCA QUI. http://abbonati.tiscali.it/adsl/sa/1e25flat_tc/