From mboxrd@z Thu Jan 1 00:00:00 1970 From: sampei02@tiscali.it Subject: Re: UDMA modes Date: Wed, 17 Aug 2005 10:17:07 +0200 Message-ID: <42D7AAD50004A80D@mail-6.mail.tiscali.sys> References: <311601c9050816081331a39ac9@mail.gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Received: from mrqout1.tiscali.it ([195.130.225.11]:32234 "EHLO mrqout1.tiscali.it") by vger.kernel.org with ESMTP id S1750983AbVHQIRT convert rfc822-to-8bit (ORCPT ); Wed, 17 Aug 2005 04:17:19 -0400 In-Reply-To: <311601c9050816081331a39ac9@mail.gmail.com> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: "Eric D. Mudama" Cc: Erik Slagter , linux-ide@vger.kernel.org I updated Kernel at 2.6.12-1.1372_FC3 by rpm package. Kernel reconized Controller IDE, infact dmesg command gets: Uniform Multi-PLatform E-IDE driver revision: 7.00alpha2 VP_IDE: IDE controller at PCI slot 0000:00:07.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt82c686b (rev.40) IDE UDMA100 controller on pci0000:00:07.= 1 probing IDE interface ide0 =2E... What do you think ? >-- Messaggio Originale -- >Date: Tue, 16 Aug 2005 09:13:25 -0600 >From: "Eric D. Mudama" >To: "sampei02@tiscali.it" >Subject: Re: UDMA modes >Cc: Erik Slagter , linux-ide@vger.kernel.org > > >we'd need to see the dmesg output I am sure > >On 8/16/05, sampei02@tiscali.it wrote: >> My Maxtor Hard Disk supports UDMA <=3D 6 (133) >> How can I control BITS options in controller ? What's line command ? >> How can I verify controller is properly configured in my kernel ? >>=20 >>=20 >> >-- Messaggio Originale -- >> >Subject: Re: UDMA modes >> >From: Erik Slagter >> >To: sampei02@tiscali.it >> >Cc: linux-ide@vger.kernel.org >> >Date: Tue, 16 Aug 2005 11:05:17 +0200 >> > >> > >> >On Tue, 2005-08-16 at 09:02 +0200, sampei02@tiscali.it wrote: >> >> I have motherboard which supports DMA ATA 66/100/133 and I connec= t HD >> with >> >> new 80-wire cable. >> >> I have FC3 with Kernel 2.6.9 >> >> With hdparm -i /dev/hda I get: >> >> >> >> DMA modes: udma0 udma1 udma2 >> >> UDMA modes: udma0 udma1 *udma2 >> >> >> >> Why udma is 2 and not udma 5 ? >> > >> >Controller not explicitly supported by linux or not configured in t= he >> >kernel? Controller needs BITS option? (see IDE config). Harddisk do= esn't >> >support > udma2? >> > >> >Allegato: signature.asc >> > >>=20 >>=20 >> __________________________________________________________________ >> TISCALI ADSL 1.25 MEGA >> Solo con Tiscali Adsl navighi senza limiti e telefoni senza canone T= elecom >> a partire da 19,95 Euro/mese. >> Attivala entro il 31 agosto, il primo MESE =E8 GRATIS! CLICCA QUI. >> http://abbonati.tiscali.it/adsl/sa/1e25flat_tc/ >>=20 >>=20 >>=20 >> - >> To unsubscribe from this list: send the line "unsubscribe linux-ide"= in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html >> >- >To unsubscribe from this list: send the line "unsubscribe linux-ide" i= n >the body of a message to majordomo@vger.kernel.org >More majordomo info at http://vger.kernel.org/majordomo-info.html __________________________________________________________________ TISCALI ADSL 1.25 MEGA Solo con Tiscali Adsl navighi senza limiti e telefoni senza canone Tele= com a partire da 19,95 Euro/mese. Attivala entro il 31 agosto, il primo MESE =E8 GRATIS! CLICCA QUI. http://abbonati.tiscali.it/adsl/sa/1e25flat_tc/