Re: Driver for sata adapter promise sata300 tx4

[Otto Meier <gf435@gmx.net>]

Daniel Drake wrote:
> Otto Meier wrote:
>> This card use the sata chip pdc 40718 (as of my card)
>> the lastest sata_promise kernel with sata promise patch driver 
>> doesn't recognise
>> this card.
>>
>> I added the following line to static struct pci_device_id 
>> pdc_ata_pci_tbl[] in sata_promise.c:
>>
>> { PCI_VENDOR_ID_PROMISE, 0x3d17, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
>> board_20319 },
>>
>> and the card was recognised and seam to work without errors so far.
>
> Yes, this should be fine (this is a 4-port SATA card right?)
>
> Are you happy to produce and submit a patch yourself (read 
> Documentation/SubmittingPatches) or should I submit one for you?
>
> Thanks,
> Daniel
>
>
Yes you are right it is a 4-port sata-II 300 card (PDC40718 ). According to
the promise feature list it should support :

SATA300™ TX4 Highlights

   * Native Command Queuing (NCQ)
   * SATA Tagged Command Queuing (TCQ)
   * Large LBA support for drives above 137GB
   * Supports Serial ATAPI devices
   * Disk Activity LED Headers
   * Flexible future-proof upgrade for users with motherboards that
     only have a PCI interface


My question is also are these features (NCQ/TCQ) and the heigher 
datarate be supported by this
modification? or is only the basic feature set of sata 150 TX4 supported?

Here is the patch:

--- linux/drivers/scsi/sata_promise.c.orig 2005-08-01 17:09:48.474824778 +0200
+++ linux/drivers/scsi/sata_promise.c 2005-07-31 12:57:06.415979512 +0200
@@ -183,6 +183,8 @@ static struct pci_device_id pdc_ata_pci_board_20319 },
{ PCI_VENDOR_ID_PROMISE, 0x3319, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 
board_20319 },
+ { PCI_VENDOR_ID_PROMISE, 0x3d17, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_20319 },
{ PCI_VENDOR_ID_PROMISE, 0x3d18, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_20319 },



Thanks
Otto


I just saw the patches of  Luke Kosewski regarding the SATA150 TX4 antipating
them it might be right to modify the patch to 


--- linux/drivers/scsi/sata_promise.c.orig 2005-08-01 17:09:48.474824778 +0200
+++ linux/drivers/scsi/sata_promise.c 2005-07-31 12:57:06.415979512 +0200
@@ -183,6 +183,8 @@ static struct pci_device_id pdc_ata_pci_board_20319 },
{ PCI_VENDOR_ID_PROMISE, 0x3319, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 
board_20319 },
+ { PCI_VENDOR_ID_PROMISE, 0x3d17, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_40518 },
{ PCI_VENDOR_ID_PROMISE, 0x3d18, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_20319 },

bye 
Otto