From: Tejun Heo <htejun@gmail.com>
To: sampei02@tiscali.it
Cc: Erik Slagter <erik@slagter.name>, linux-ide@vger.kernel.org
Subject: Re: SOLVED: DriveStatusError BadCRC
Date: Wed, 10 Aug 2005 19:25:40 +0900 [thread overview]
Message-ID: <42F9D624.6020005@gmail.com> (raw)
In-Reply-To: <42D7AA47000408B7@mail-5.mail.tiscali.sys>
sampei02@tiscali.it wrote:
> I replaced 80 wire flat cable with another 40 wire cable.
> In this way I have no errors but now UDMA mode is set to 2 value.
> I'm sure that MOTHERBOARD supports UDMA ATA/33/66/100 BUS IDE ports.
> What do you think ?
[sticking nose in...]
In that case, it could be one of...
#1 faulty cable, try another 80c cable
#2 only one device gets attached to the cable but it's using the
middle connector. You need to use the connector at the end of cable
when you connect only one device. (I think it became a requirement w/
newer transfer modes. No? still recommendation?)
#3 faulty IDE controller (or faulty traces from the controller to cable)
#4 faulty drive
My bet is on #1 or #2.
--
tejun
prev parent reply other threads:[~2005-08-10 10:25 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-08-07 9:32 DriveStatusError BadCRC sampei02
2005-08-07 10:47 ` Tyler
2005-08-07 14:38 ` Eric D. Mudama
2005-08-08 9:54 ` Erik Slagter
2005-08-10 10:14 ` SOLVED: " sampei02
2005-08-10 10:25 ` Tejun Heo [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=42F9D624.6020005@gmail.com \
--to=htejun@gmail.com \
--cc=erik@slagter.name \
--cc=linux-ide@vger.kernel.org \
--cc=sampei02@tiscali.it \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).