[PATCH] add correct device link to ide-cs

[PATCH] add correct device link to ide-cs

[Hannes Reinecke]

[-- Attachment #1: Type: text/plain, Size: 703 bytes --]

Hi Jens,

the ide-cs driver does not create the correct device link; instead of
being connected to the appropriate PCMCIA slot it just sits und
/sys/devices. Clearly unsatisfactory.

To fix I've added a field 'dev' to include/linux/ide.h:hw_regs_t.
This is being passed over as the 'gendev.parent' link for hwif, thus
allowing us to set the device link even for non-PCI devices.

I think it's a quite sensible approach, but it's probably not for me to
decide.

Comments etc welcome.
Otherwise, please apply.

Cheers,

Hannes
-- 
Dr. Hannes Reinecke			hare@suse.de
SuSE Linux Products GmbH		S390 & zSeries
Maxfeldstraße 5				+49 911 74053 688
90409 Nürnberg				http://www.suse.de

[-- Attachment #2: ide-cs-correct-device-link --]
[-- Type: text/plain, Size: 2297 bytes --]

From: Hannes Reinecke <hare@suse.de>
Subject: Incorrect device link for ide-cs

Devices driven by ide-cs will appear under /sys/devices instead of the
appropriate PCMCIA device. To fix this I had to extend the hw_regs_t
structure with a 'struct device' field, which allows us to set the
parent link for the appropriate hwif.

Signed-off-by: Hannes Reinecke <hare@suse.de>

diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -803,6 +803,7 @@ found:
 	hwif->irq = hw->irq;
 	hwif->noprobe = 0;
 	hwif->chipset = hw->chipset;
+	hwif->gendev.parent = hw->dev;
 
 	if (!initializing) {
 		probe_hwif_init_with_fixup(hwif, fixup);
diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c
--- a/drivers/ide/legacy/ide-cs.c
+++ b/drivers/ide/legacy/ide-cs.c
@@ -182,13 +182,14 @@ static void ide_detach(dev_link_t *link)
     
 } /* ide_detach */
 
-static int idecs_register(unsigned long io, unsigned long ctl, unsigned long irq)
+static int idecs_register(unsigned long io, unsigned long ctl, unsigned long irq, struct pcmcia_device *handle)
 {
     hw_regs_t hw;
     memset(&hw, 0, sizeof(hw));
-    ide_init_hwif_ports(&hw, io, ctl, NULL);
+    ide_std_init_ports(&hw, io, ctl);
     hw.irq = irq;
     hw.chipset = ide_pci;
+    hw.dev = &handle->dev;
     return ide_register_hw_with_fixup(&hw, NULL, ide_undecoded_slave);
 }
 
@@ -328,12 +329,12 @@ static void ide_config(dev_link_t *link)
 
     /* retry registration in case device is still spinning up */
     for (hd = -1, i = 0; i < 10; i++) {
-	hd = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ);
+	hd = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, handle);
 	if (hd >= 0) break;
 	if (link->io.NumPorts1 == 0x20) {
 	    outb(0x02, ctl_base + 0x10);
 	    hd = idecs_register(io_base + 0x10, ctl_base + 0x10,
-				link->irq.AssignedIRQ);
+				link->irq.AssignedIRQ, handle);
 	    if (hd >= 0) {
 		io_base += 0x10;
 		ctl_base += 0x10;
diff --git a/include/linux/ide.h b/include/linux/ide.h
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -230,6 +230,7 @@ typedef struct hw_regs_s {
 	int		dma;			/* our dma entry */
 	ide_ack_intr_t	*ack_intr;		/* acknowledge interrupt */
 	hwif_chipset_t  chipset;
+	struct device	*dev;
 } hw_regs_t;
 
 /*