Re: [RFC][PATCH 2.6.13] Marvell SATA support (PIO mode)

[Jiri Slaby <jirislaby@gmail.com>]

Brett Russ napsal(a):

>This is the first public release of my libata compatible low level driver for
>the Marvell SATA family.  Currently it successfully runs in PIO mode on a 6081
>chip.  EDMA support is in the works and should be done shortly.  Review,
>testing (especially on other flavors of Marvell), comments welcome.
>  
>
[snip]

>+static struct pci_device_id mv_pci_tbl[] = {
>+	{PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5040), 0, 0, chip_504x},
>+	{PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5041), 0, 0, chip_504x},
>+	{PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5080), 0, 0, chip_508x},
>+	{PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5081), 0, 0, chip_508x},
>+
>+	{PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6040), 0, 0, chip_604x},
>+	{PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6041), 0, 0, chip_604x},
>+	{PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6080), 0, 0, chip_608x},
>+	{PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6081), 0, 0, chip_608x},
>+	{}			/* terminate list */
>+};
> <http://localhost/lxr/ident?i=MODULE_DEVICE_TABLE>
>
MODULE_DEVICE_TABLE(pci, 
<http://localhost/lxr/ident?i=MODULE_DEVICE_TABLE>mv_pci_tbl);  here for 
hotplug

>+
>+static struct pci_driver mv_pci_driver = {
>+	.name			= DRV_NAME,
>+	.id_table		= mv_pci_tbl,
>+	.probe			= mv_init_one,
>+	.remove			= ata_pci_remove_one,
>+};
>  
>
[snip]

-- 
Jiri Slaby         www.fi.muni.cz/~xslaby
~\-/~      jirislaby@gmail.com      ~\-/~
241B347EC88228DE51EE A49C4A73A25004CB2A10