USB-Storage, slow speed with sync option

USB-Storage, slow speed with sync option

[Stefan]

Hi folks,

I'm not sure if this is the correct list for my problem. So bare with me.

When I copy files to my USB 2.0 Stick , my transferspeed are horrible in
case I mount the device with sync option, the rates are around 50KB/s,
doesn't really matter how big the files are.
If I don't mount with option sync, then the speeds are as expected a
couple of MB/s

I don't think this is the default behaviour, right?

Anybody got an idea what could be wrong?

Filesystem is vfat.
I tried with different kernels and a live cd(knoppix), currently I use
kernel 2.6.13.
Motherboard is an NFORCE 4 based one:

0000:00:02.0 USB Controller: nVidia Corporation CK804 USB Controller
(rev a2)
0000:00:02.1 USB Controller: nVidia Corporation CK804 USB Controller
(rev a3)

USB Info shows the device using ehci_hcd module

Thanks in advance, Stefan


	

	
		
___________________________________________________________ 
Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier anmelden: http://mail.yahoo.de

Re: USB-Storage, slow speed with sync option

[Erik Slagter]

[-- Attachment #1: Type: text/plain, Size: 407 bytes --]

On Wed, 2005-09-14 at 02:53 +0200, Stefan wrote:
> When I copy files to my USB 2.0 Stick , my transferspeed are horrible in
> case I mount the device with sync option, the rates are around 50KB/s,
> doesn't really matter how big the files are.
> If I don't mount with option sync, then the speeds are as expected a
> couple of MB/s

Now do a complete benchmark and type "sync" after the cp command.

[-- Attachment #2: smime.p7s --]
[-- Type: application/x-pkcs7-signature, Size: 2115 bytes --]

Re: USB-Storage, slow speed with sync option

[Stefan]

Erik Slagter wrote:

>On Wed, 2005-09-14 at 02:53 +0200, Stefan wrote:
>  
>
>>When I copy files to my USB 2.0 Stick , my transferspeed are horrible in
>>case I mount the device with sync option, the rates are around 50KB/s,
>>doesn't really matter how big the files are.
>>If I don't mount with option sync, then the speeds are as expected a
>>couple of MB/s
>>    
>>
>
>Now do a complete benchmark and type "sync" after the cp command.
>  
>

I already did that:-)

With sync option, a test directory takes about 15min to copy.
Without sync option about 20s and running command sync afterwards takes
about 5-10s.

So roughly 15min compared to 30s

	

	
		
___________________________________________________________ 
Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier anmelden: http://mail.yahoo.de

Re: USB-Storage, slow speed with sync option

[Erik Slagter]

[-- Attachment #1: Type: text/plain, Size: 984 bytes --]

On Wed, 2005-09-14 at 12:27 +0200, Stefan wrote:
> >>When I copy files to my USB 2.0 Stick , my transferspeed are horrible in
> >>case I mount the device with sync option, the rates are around 50KB/s,
> >>doesn't really matter how big the files are.
> >>If I don't mount with option sync, then the speeds are as expected a
> >>couple of MB/s
> >Now do a complete benchmark and type "sync" after the cp command.

> I already did that:-)
> 
> With sync option, a test directory takes about 15min to copy.
> Without sync option about 20s and running command sync afterwards takes
> about 5-10s.
> 
> So roughly 15min compared to 30s

The problem is that with the "sync" option the metadata on the stick has
be written on every block write. That is not only terribly slow
(especially on a flash device), it also wears out certain sectors.
Compare it to using floppy's on a MS/DOS computer.

Why would you _ever_ want to use the sync mount option on a flash
device?

[-- Attachment #2: smime.p7s --]
[-- Type: application/x-pkcs7-signature, Size: 2115 bytes --]

Re: USB-Storage, slow speed with sync option

[Stefan]

Erik Slagter wrote:

>On Wed, 2005-09-14 at 12:27 +0200, Stefan wrote:
>  
>
>>>>When I copy files to my USB 2.0 Stick , my transferspeed are horrible in
>>>>case I mount the device with sync option, the rates are around 50KB/s,
>>>>doesn't really matter how big the files are.
>>>>If I don't mount with option sync, then the speeds are as expected a
>>>>couple of MB/s
>>>>        
>>>>
>>>Now do a complete benchmark and type "sync" after the cp command.
>>>      
>>>
>
>  
>
>>I already did that:-)
>>
>>With sync option, a test directory takes about 15min to copy.
>>Without sync option about 20s and running command sync afterwards takes
>>about 5-10s.
>>
>>So roughly 15min compared to 30s
>>    
>>
>
>The problem is that with the "sync" option the metadata on the stick has
>be written on every block write. That is not only terribly slow
>(especially on a flash device), it also wears out certain sectors.
>Compare it to using floppy's on a MS/DOS computer.
>
>Why would you _ever_ want to use the sync mount option on a flash
>device?
>  
>
Don't ask me:-)

I used to mount without sync option, but I switched to hal + dbus now
and with gentoo it automatically sets sync option in fstab :-(

Your explanation makes sense and I kind of had the same thought at
first, but also was unsure since somebody must have put it there,
therefore I'm going to check how to remove sync from those scripts that
set the mountpoint in fstab and discuss with the gentoo dev who set this up.


Thanks for your help Erik


	

	
		
___________________________________________________________ 
Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier anmelden: http://mail.yahoo.de

Re: USB-Storage, slow speed with sync option

[Lionel Bouton]

Stefan wrote the following on 14.09.2005 12:43 :

>Erik Slagter wrote:
>  
>
>>
>>Why would you _ever_ want to use the sync mount option on a flash
>>device?
>> 
>>
>>    
>>
>Don't ask me:-)
>
>I used to mount without sync option, but I switched to hal + dbus now
>and with gentoo it automatically sets sync option in fstab :-(
>  
>

This is purely a PBKAK :
users want to remove the device as soon as they get feedback from their 
UI telling them that their transfer is done (in fact they even screw up 
and remove the device before it is done). sync in fstab isn't 
particularly clever, but sync with automount is more useful : when 
properly configured, as soon as the transfer is done the automounter can 
cleanly umount the block device which is nearly instantaneous when sync 
is used. Without sync there can be some awfully long delays with flash 
and huge caches (on a 512M slow SD, I saw 30+ seconds after transfering 
10s or 100s of MB).

This is understandable, for all the removable devices without a clean 
"eject" and VFAT formatted, using sync is probably the best safeguard 
against badly screwed up filesystems.

Lionel.

Re: USB-Storage, slow speed with sync option

[Erik Slagter]

[-- Attachment #1: Type: text/plain, Size: 1409 bytes --]

On Wed, 2005-09-14 at 14:45 +0200, Lionel Bouton wrote:
> >>Why would you _ever_ want to use the sync mount option on a flash
> >>device?
> >Don't ask me:-)

> >I used to mount without sync option, but I switched to hal + dbus now
> >and with gentoo it automatically sets sync option in fstab :-(

> This is purely a PBKAK :
> users want to remove the device as soon as they get feedback from their 
> UI telling them that their transfer is done (in fact they even screw up 
> and remove the device before it is done). sync in fstab isn't 
> particularly clever, but sync with automount is more useful : when 
> properly configured, as soon as the transfer is done the automounter can 
> cleanly umount the block device which is nearly instantaneous when sync 
> is used. Without sync there can be some awfully long delays with flash 
> and huge caches (on a 512M slow SD, I saw 30+ seconds after transfering 
> 10s or 100s of MB).

> This is understandable, for all the removable devices without a clean 
> "eject" and VFAT formatted, using sync is probably the best safeguard 
> against badly screwed up filesystems.

It's a very bad solution, because it's slow, but worse, it wears out
particular sectors, although the only good option (make the stick
non-removable when in use is not quite feasible).

People must be instructed to eject() before plug out. Just like
floppies.

[-- Attachment #2: smime.p7s --]
[-- Type: application/x-pkcs7-signature, Size: 2115 bytes --]

Re: USB-Storage, slow speed with sync option

[Erik Slagter]

[-- Attachment #1: Type: text/plain, Size: 325 bytes --]

On Wed, 2005-09-14 at 08:58 -0400, Greg Freemyer wrote:
> Maybe a bad idea, but SuSE for one has been doing sync on automount of
> USB devices since at least 9.1 (18 months ago)

It seems a better idea to me to tune bd/pdflush/kflushd parameters to
make it flush buffers sooner.

Grmbl, back to windows semantics :-(

[-- Attachment #2: smime.p7s --]
[-- Type: application/x-pkcs7-signature, Size: 2115 bytes --]

Re: USB-Storage, slow speed with sync option

[Mark Lord]

Erik Slagter wrote:
>
> It's a very bad solution, because it's slow, but worse, it wears out
> particular sectors, although the only good option (make the stick
> non-removable when in use is not quite feasible).

Bad, YES.  Slow, VERY.

Wears out sectors?  Not really.
These flash sticks, along with CF and SD cards, all include
built-in controllers that do automatic wear-leveling.

So rewriting a small group of "logical" sectors over and over
does not, in fact, rewrite the same physical pages in flash.

But SYNC is still horrible for this application!

Re: USB-Storage, slow speed with sync option

[Lionel Bouton]

Mark Lord wrote the following on 14.09.2005 17:26 :

> Erik Slagter wrote:
>
>>
>> It's a very bad solution, because it's slow, but worse, it wears out
>> particular sectors, although the only good option (make the stick
>> non-removable when in use is not quite feasible).
>
>
> Bad, YES.  Slow, VERY.
>
> Wears out sectors?  Not really.
> These flash sticks, along with CF and SD cards, all include
> built-in controllers that do automatic wear-leveling.


Do they all have such controllers now? Last time I checked, low quality 
parts didn't have them and it wasn't easy to verify which ones did.

Re: USB-Storage, slow speed with sync option

[Mark Lord]

Lionel Bouton wrote:
> Mark Lord wrote the following on 14.09.2005 17:26 :
>> These flash sticks, along with CF and SD cards, all include
>> built-in controllers that do automatic wear-leveling.
> 
> Do they all have such controllers now? Last time I checked, low quality 
> parts didn't have them and it wasn't easy to verify which ones did.

Pretty much all of them use NAND flash, which comes with 1-3%
bad blocks from the factory.  So the onboard controllers already
have to deal with *that* issue, and the same remapping logic is
normally extended to allow them to do wear leveling as well.

Wear leveling is imperfect, in that they devices can only include
sectors *known* by the *device* to be inactive, so as files are
written and deleted many sectors are removed from the wear rotation
until the next time they are logically rewritten (or until a CFA ERASE
command, which Linux never does.  Sad.).

Cannot say for sure whether 100% of controllers are adequately intelligent,
but that kind of control logic is pretty pervasive these days.
It would be a very rare device indeed that lacks it.

Cheers

Re: USB-Storage, slow speed with sync option

[Stefan]

Lionel Bouton wrote:

> Stefan wrote the following on 14.09.2005 12:43 :
>
>> Erik Slagter wrote:
>>  
>>
>>>
>>> Why would you _ever_ want to use the sync mount option on a flash
>>> device?
>>>
>>>
>>>   
>>
>> Don't ask me:-)
>>
>> I used to mount without sync option, but I switched to hal + dbus now
>> and with gentoo it automatically sets sync option in fstab :-(
>>  
>>
>
> This is purely a PBKAK :
> users want to remove the device as soon as they get feedback from
> their UI telling them that their transfer is done (in fact they even
> screw up and remove the device before it is done). sync in fstab isn't
> particularly clever, but sync with automount is more useful : when
> properly configured, as soon as the transfer is done the automounter
> can cleanly umount the block device which is nearly instantaneous when
> sync is used.


I guess that is what suse must have setup, since I just checked there
and it works smooth although they use sync option.

> Without sync there can be some awfully long delays with flash and huge
> caches (on a 512M slow SD, I saw 30+ seconds after transfering 10s or
> 100s of MB).
>
> This is understandable, for all the removable devices without a clean
> "eject" and VFAT formatted, using sync is probably the best safeguard
> against badly screwed up filesystems.
>
> Lionel.
>


	

	
		
___________________________________________________________ 
Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier anmelden: http://mail.yahoo.de