linux-ide.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bill Davidsen <davidsen@tmr.com>
To: Robert Kesterson <robertk@robertk.com>
Cc: linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org
Subject: Re: [PATCH 2.6.13] drivers/ide: Enable basic VIA VT6410 IDE functionality
Date: Thu, 22 Sep 2005 14:41:28 -0400	[thread overview]
Message-ID: <4332FAD8.50800@tmr.com> (raw)
In-Reply-To: <op.sxg2dxd5wc4mme@new.robertk.com>

Robert Kesterson wrote:
> This patch enables plain IDE functionality on the VIA VT6410 IDE controller
> (such as used on the Asus P4P800 Deluxe motherboard).  This is not a RAID
> driver, but you can use Linux's software RAID once the drives are visible.
> I did not write the original version of this patch, which I found on the
> internet back in the days of kernel 2.6.2.  I have been unable to identify
> the original author to give him/her proper credit.  I have been maintaining
> and updating this patch since then and have released several updates which
> have been successfully used by others who have downloaded it from my
> website.
> 
> It seems appropriate that this minimal functionality should be in the
> mainstream kernel.

Thank you, I have been running with a similar patch for 2.4 series, but 
have been running unpatched kernels for testing and have not had access 
to my other drives. Hopefully this can get into the mainstream without 
too much delay.

-- 
    -bill davidsen (davidsen@tmr.com)
"The secret to procrastination is to put things off until the
  last possible moment - but no longer"  -me

  parent reply	other threads:[~2005-09-22 18:42 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-09-21 21:38 [PATCH 2.6.13] drivers/ide: Enable basic VIA VT6410 IDE functionality Robert Kesterson
2005-09-22 14:28 ` Alan Cox
2005-09-23 15:40   ` Bartlomiej Zolnierkiewicz
2005-09-22 18:41 ` Bill Davidsen [this message]
2005-10-03 18:41 ` Bill Davidsen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4332FAD8.50800@tmr.com \
    --to=davidsen@tmr.com \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robertk@robertk.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).