From: Albert Lee <albertcc@tw.ibm.com>
To: Jeff Garzik <jgarzik@pobox.com>
Cc: Mark Lord <mlord@pobox.com>,
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>,
Linux IDE <linux-ide@vger.kernel.org>,
Doug Maxey <dwm@maxeymade.com>, Tejun Heo <htejun@gmail.com>,
Brett Russ <russb@emc.com>, Alan Cox <alan@lxorguk.ukuu.org.uk>
Subject: [PATCH/RFC 1/4] CHS: move the initialization of taskfile LBA flags (resend)
Date: Wed, 05 Oct 2005 19:59:16 +0800 [thread overview]
Message-ID: <4343C014.1070908@tw.ibm.com> (raw)
In-Reply-To: <4343B5F5.4090402@tw.ibm.com>
The tab was expanded to spaces in the previous mail. :(
Hope this time it is correct.
Patch 1/4:
move the initialization of taskfile LBA flags:
ATA_TFLAG_LBA and ATA_TFLAG_LBA48 flags
to the SCSI translation functions
For your review, thanks.
Albert
Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
=============
--- upstream/drivers/scsi/libata-core.c 2005-10-05 18:04:07.000000000 +0800
+++ ch1/drivers/scsi/libata-core.c 2005-10-05 18:10:28.000000000 +0800
@@ -3241,13 +3241,6 @@ struct ata_queued_cmd *ata_qc_new_init(s
qc->nbytes = qc->curbytes = 0;
ata_tf_init(ap, &qc->tf, dev->devno);
-
- if (dev->flags & ATA_DFLAG_LBA) {
- qc->tf.flags |= ATA_TFLAG_LBA;
-
- if (dev->flags & ATA_DFLAG_LBA48)
- qc->tf.flags |= ATA_TFLAG_LBA48;
- }
}
return qc;
--- upstream/drivers/scsi/libata-scsi.c 2005-10-05 18:04:07.000000000 +0800
+++ ch1/drivers/scsi/libata-scsi.c 2005-10-05 18:10:28.000000000 +0800
@@ -489,7 +489,7 @@ static unsigned int ata_scsi_flush_xlat(
tf->flags |= ATA_TFLAG_DEVICE;
tf->protocol = ATA_PROT_NODATA;
- if ((tf->flags & ATA_TFLAG_LBA48) &&
+ if ((qc->dev->flags & ATA_DFLAG_LBA48) &&
(ata_id_has_flush_ext(qc->dev->id)))
tf->command = ATA_CMD_FLUSH_EXT;
else
@@ -609,8 +609,6 @@ static unsigned int ata_scsi_verify_xlat
{
struct ata_taskfile *tf = &qc->tf;
struct ata_device *dev = qc->dev;
- unsigned int lba = tf->flags & ATA_TFLAG_LBA;
- unsigned int lba48 = tf->flags & ATA_TFLAG_LBA48;
u64 dev_sectors = qc->dev->n_sectors;
u64 block;
u32 n_block;
@@ -631,16 +629,16 @@ static unsigned int ata_scsi_verify_xlat
return 1;
if ((block + n_block) > dev_sectors)
return 1;
- if (lba48) {
- if (n_block > (64 * 1024))
- return 1;
- } else {
- if (n_block > 256)
- return 1;
- }
- if (lba) {
- if (lba48) {
+ if (dev->flags & ATA_DFLAG_LBA) {
+ tf->flags |= ATA_TFLAG_LBA;
+
+ if (dev->flags & ATA_DFLAG_LBA48) {
+ if (n_block > (64 * 1024))
+ return 1;
+
+ /* use LBA48 */
+ tf->flags |= ATA_TFLAG_LBA48;
tf->command = ATA_CMD_VERIFY_EXT;
tf->hob_nsect = (n_block >> 8) & 0xff;
@@ -649,8 +647,11 @@ static unsigned int ata_scsi_verify_xlat
tf->hob_lbam = (block >> 32) & 0xff;
tf->hob_lbal = (block >> 24) & 0xff;
} else {
- tf->command = ATA_CMD_VERIFY;
+ if (n_block > 256)
+ return 1;
+ /* use LBA28 */
+ tf->command = ATA_CMD_VERIFY;
tf->device |= (block >> 24) & 0xf;
}
@@ -665,6 +666,9 @@ static unsigned int ata_scsi_verify_xlat
/* CHS */
u32 sect, head, cyl, track;
+ if (n_block > 256)
+ return 1;
+
/* Convert LBA to CHS */
track = (u32)block / dev->sectors;
cyl = track / dev->heads;
@@ -716,8 +720,6 @@ static unsigned int ata_scsi_rw_xlat(str
{
struct ata_taskfile *tf = &qc->tf;
struct ata_device *dev = qc->dev;
- unsigned int lba = tf->flags & ATA_TFLAG_LBA;
- unsigned int lba48 = tf->flags & ATA_TFLAG_LBA48;
u64 block;
u32 n_block;
@@ -766,19 +768,24 @@ static unsigned int ata_scsi_rw_xlat(str
*/
return 1;
- if (lba) {
- if (lba48) {
+ if (dev->flags & ATA_DFLAG_LBA) {
+ tf->flags |= ATA_TFLAG_LBA;
+
+ if (dev->flags & ATA_DFLAG_LBA48) {
/* The request -may- be too large for LBA48. */
if ((block >> 48) || (n_block > 65536))
return 1;
+ /* use LBA48 */
+ tf->flags |= ATA_TFLAG_LBA48;
+
tf->hob_nsect = (n_block >> 8) & 0xff;
tf->hob_lbah = (block >> 40) & 0xff;
tf->hob_lbam = (block >> 32) & 0xff;
tf->hob_lbal = (block >> 24) & 0xff;
} else {
- /* LBA28 */
+ /* use LBA28 */
/* The request -may- be too large for LBA28. */
if ((block >> 28) || (n_block > 256))
next prev parent reply other threads:[~2005-10-05 11:59 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-09-09 16:14 [PATCH RFC] libata: interrupt driven pio Albert Lee
2005-09-09 17:35 ` Jeff Garzik
2005-09-09 18:14 ` Doug Maxey
2005-09-22 4:00 ` [PATCH/RFC 0/3] libata: interrupt driven pio (revised) Albert Lee
2005-09-22 4:09 ` [PATCH/RFC 1/3] libata: interrupt driven pio for libata-core Albert Lee
2005-09-23 9:25 ` Albert Lee
2005-09-22 4:11 ` [PATCH/RFC 2/3] libata: rename task states/variables Albert Lee
2005-09-23 9:34 ` Albert Lee
2005-09-22 4:14 ` [PATCH/RFC 3/3] libata: interrupt driven pio for LLD Albert Lee
2005-09-22 12:56 ` Mark Lord
2005-09-23 2:40 ` Albert Lee
2005-09-23 9:46 ` [PATCH/RFC 0/3] libata: interrupt driven pio (revised) Jeff Garzik
2005-09-27 9:31 ` [PATCH/RFC 0/4] libata: interrupt driven pio (revised 2) Albert Lee
2005-09-27 9:34 ` [PATCH/RFC 1/4] libata: indent and whitespace change Albert Lee
2005-09-27 9:36 ` [PATCH/RFC 2/4] libata: rename host states Albert Lee
2005-09-28 15:59 ` Jeff Garzik
2005-09-27 9:38 ` [PATCH/RFC 3/4] libata: interrupt driven pio for libata-core Albert Lee
2005-09-28 16:09 ` Jeff Garzik
2005-09-29 10:08 ` Bartlomiej Zolnierkiewicz
2005-09-30 8:02 ` Albert Lee
2005-09-30 9:28 ` Bartlomiej Zolnierkiewicz
2005-09-30 11:28 ` Albert Lee
2005-09-30 12:00 ` Bartlomiej Zolnierkiewicz
2005-09-30 11:04 ` [PATCH/RFC 0/4] libata: irq driven pio follow-up patches Albert Lee
2005-09-30 11:07 ` [PATCH/RFC 1/4] irq-pio: add comments and cleanup Albert Lee
2005-09-30 11:09 ` [PATCH/RFC 2/4] irq-pio: rename atapi_packet_task() and comments Albert Lee
2005-09-30 11:11 ` [PATCH/RFC 3/4] irq-pio: simplify if condition in ata_dataout_task() Albert Lee
2005-09-30 11:14 ` [PATCH/RFC 4/4] irq-pio: cleanup ata_qc_issue_prot() Albert Lee
2005-09-30 11:21 ` [PATCH/RFC 0/4] libata: irq driven pio follow-up patches Jeff Garzik
2005-10-03 11:46 ` [PATCH/RFC 0/4] libata: more " Albert Lee
2005-10-03 13:00 ` [PATCH/RFC 1/4] irq-pio: move functions Albert Lee
2005-10-03 13:02 ` [PATCH/RFC 2/4] irq-pio: remove ap->dataout_task Albert Lee
2005-10-04 10:09 ` Jeff Garzik
2005-10-04 11:54 ` Albert Lee
2005-10-03 13:18 ` [PATCH/RFC 3/4] irq-pio: integrate ata_pio_first_block() with ata_pio_task() Albert Lee
2005-10-04 10:10 ` Jeff Garzik
2005-10-03 13:19 ` [PATCH/RFC 4/4] irq-pio: add read/write multiple support Albert Lee
2005-10-03 13:35 ` Mark Lord
2005-10-04 9:43 ` Jeff Garzik
2005-10-04 12:00 ` Albert Lee
2005-10-04 12:07 ` Jeff Garzik
2005-10-04 12:22 ` [PATCH/RFC 0/4] libata: CHS follow-up patches Albert Lee
2005-10-04 12:27 ` [PATCH/RFC 1/4] CHS: white space beautification Albert Lee
2005-10-04 12:49 ` Jeff Garzik
2005-10-04 12:29 ` [PATCH/RFC 2/4] CHS: tidy up SCSI lba and transfer length calculation Albert Lee
2005-10-04 12:30 ` [PATCH/RFC 3/4] CHS: add CHS support to ata_scsi_start_stop_xlat() Albert Lee
2005-10-04 12:34 ` [PATCH/RFC 4/4] CHS: calculate LBA28/LBA48 commands and protocol on the fly Albert Lee
2005-10-04 12:52 ` Jeff Garzik
2005-10-05 11:16 ` [PATCH/RFC 0/4] libata: more CHS follow-up patches Albert Lee
2005-10-05 11:20 ` [PATCH/RFC 1/4] CHS: move the initialization of taskfile LBA flags Albert Lee
2005-10-05 11:23 ` [PATCH/RFC 2/4] CHS: calculate read/write commands and protocol on the fly Albert Lee
2005-10-05 11:25 ` [PATCH/RFC 3/4] CHS: support overriding the ata_rwcmd_protocol() function Albert Lee
2005-10-05 11:27 ` [PATCH/RFC 4/4] CHS: optimize LBA28/LBA48 usage Albert Lee
2005-10-05 11:59 ` Albert Lee [this message]
2005-10-05 12:02 ` [PATCH/RFC 2/4] CHS: calculate read/write commands and protocol on the fly (resend) Albert Lee
2005-10-05 12:03 ` [PATCH/RFC 3/4] CHS: support overriding the ata_rwcmd_protocol() function (resend) Albert Lee
2005-10-05 12:04 ` [PATCH/RFC 4/4] CHS: optimize LBA28/LBA48 usage (resend) Albert Lee
2005-10-06 11:26 ` [PATCH/RFC 0/4] libata: more CHS follow-up patches Jeff Garzik
2005-10-07 6:53 ` [PATCH 0/3] libata: CHS follow-up patches (resend #2) Albert Lee
2005-10-07 6:58 ` [PATCH 1/3] CHS: move the initialization of taskfile LBA flags Albert Lee
2005-10-07 7:01 ` [PATCH 2/3] CHS: calculate read/write commands and protocol on the fly Albert Lee
2005-10-07 7:04 ` [PATCH 3/3] CHS: LBA28/LBA48 optimization Albert Lee
2005-10-07 8:32 ` [PATCH 0/3] libata: CHS follow-up patches (resend #4) Albert Lee
2005-10-07 8:34 ` [PATCH 1/3] CHS: move the initialization of taskfile LBA flags " Albert Lee
2005-10-07 8:36 ` [PATCH 2/3] CHS: calculate read/write commands and protocol on the fly " Albert Lee
2005-10-07 8:37 ` [PATCH 3/3] CHS: LBA28/LBA48 optimization " Albert Lee
2005-10-09 13:41 ` [PATCH 0/3] libata: CHS follow-up patches " Jeff Garzik
2005-10-11 11:05 ` [PATCH 0/4] libata: CHS follow-up patches (resend #5) Albert Lee
2005-10-11 11:09 ` [PATCH 1/4] CHS: move the initialization of taskfile LBA flags " Albert Lee
2005-10-11 11:11 ` [PATCH 2/4] CHS: calculate read/write commands and protocol on the fly " Albert Lee
2005-10-11 11:21 ` [PATCH 4/4] CHS: LBA28/LBA48 optimization " Albert Lee
2005-10-11 13:09 ` Mark Lord
2005-10-11 13:12 ` Mark Lord
2005-10-12 5:05 ` Albert Lee
2005-10-04 15:48 ` [PATCH/RFC 4/4] CHS: calculate LBA28/LBA48 commands and protocol on the fly Alan Cox
2005-10-04 10:19 ` [PATCH/RFC 4/4] irq-pio: add read/write multiple support Jeff Garzik
2005-09-27 9:39 ` [PATCH/RFC 4/4] libata: interrupt driven pio for LLD Albert Lee
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4343C014.1070908@tw.ibm.com \
--to=albertcc@tw.ibm.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=bzolnier@gmail.com \
--cc=dwm@maxeymade.com \
--cc=htejun@gmail.com \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
--cc=mlord@pobox.com \
--cc=russb@emc.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).