linux-ide.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* no device found for TX4000
@ 2005-10-05 18:05 Nick Pasich
  2005-10-05 22:13 ` Jeff Garzik
  0 siblings, 1 reply; 4+ messages in thread
From: Nick Pasich @ 2005-10-05 18:05 UTC (permalink / raw)
  To: Jeff Garzik; +Cc: linux-ide


Jeff,


I'm running Slackware 10.1 and have compiled linux-2.6.13.3 kernel
with the sata_promise.c as kernel resident.


I received the following in the kernel log:

********************************************************************************
Oct  4 16:51:24 Server05 kernel: ata1: PATA max UDMA/133 cmd 0xF0800200 ctl 0xF0
Oct  4 16:51:24 Server05 kernel: ata2: PATA max UDMA/133 cmd 0xF0800280 ctl 0xF0
Oct  4 16:51:24 Server05 kernel: ata3: PATA max UDMA/133 cmd 0xF0800300 ctl 0xF0
Oct  4 16:51:24 Server05 kernel: ata4: PATA max UDMA/133 cmd 0xF0800380 ctl 0xF0
Oct  4 16:51:24 Server05 kernel: ata1: no device found (phy stat 00000000)
Oct  4 16:51:24 Server05 kernel: scsi1 : sata_promise
Oct  4 16:51:24 Server05 kernel: ata2: no device found (phy stat 00000000)
Oct  4 16:51:24 Server05 kernel: scsi2 : sata_promise
Oct  4 16:51:24 Server05 kernel: ata3: no device found (phy stat 00000000)
Oct  4 16:51:24 Server05 kernel: scsi3 : sata_promise
Oct  4 16:51:24 Server05 kernel: ata4: no device found (phy stat 00000000)
Oct  4 16:51:24 Server05 kernel: scsi4 : sata_promise
********************************************************************************



I then compiled sata_promise.c as a module and received the same message
on a modprobe....


Any help would be appreciated.....


        ---( Nick Pasich )---





^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: no device found for TX4000
  2005-10-05 18:05 no device found for TX4000 Nick Pasich
@ 2005-10-05 22:13 ` Jeff Garzik
  2005-10-05 22:27   ` Nick Pasich
  2005-10-07 13:43   ` Nick Pasich
  0 siblings, 2 replies; 4+ messages in thread
From: Jeff Garzik @ 2005-10-05 22:13 UTC (permalink / raw)
  To: Nick Pasich; +Cc: linux-ide

Nick Pasich wrote:
> Jeff,
> 
> 
> I'm running Slackware 10.1 and have compiled linux-2.6.13.3 kernel
> with the sata_promise.c as kernel resident.

Should be fixed in 2.6.14-rcX...

	Jeff




^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: no device found for TX4000
  2005-10-05 22:13 ` Jeff Garzik
@ 2005-10-05 22:27   ` Nick Pasich
  2005-10-07 13:43   ` Nick Pasich
  1 sibling, 0 replies; 4+ messages in thread
From: Nick Pasich @ 2005-10-05 22:27 UTC (permalink / raw)
  To: Jeff Garzik; +Cc: linux-ide

Thanks Jeff.....

I'll compile 2.6.14-rc3 and let you know what happens...

             ---( Nick Pasich )---


On Wed, Oct 05, 2005 at 06:13:29PM -0400, Jeff Garzik wrote:
> Nick Pasich wrote:
> >Jeff,
> >
> >
> >I'm running Slackware 10.1 and have compiled linux-2.6.13.3 kernel
> >with the sata_promise.c as kernel resident.
> 
> Should be fixed in 2.6.14-rcX...
> 
> 	Jeff
> 
> 
> 

-- 
--------
WebSite: http://NickAndBarb.net
--------


^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: no device found for TX4000
  2005-10-05 22:13 ` Jeff Garzik
  2005-10-05 22:27   ` Nick Pasich
@ 2005-10-07 13:43   ` Nick Pasich
  1 sibling, 0 replies; 4+ messages in thread
From: Nick Pasich @ 2005-10-07 13:43 UTC (permalink / raw)
  To: Jeff Garzik; +Cc: linux-ide

Jeff,

The sata_promise fixes in linux-2.6.14-rc3 "did the trick".

All 4 drives are now accessible.

*******************************************************************************************************
*******************************************************************************************************
Oct  6 15:09:49 Server05 kernel: ata1: PATA max UDMA/133 cmd 0xF0CE2200 ctl 0xF0CE2238 bmdma 0x0 irq 11
Oct  6 15:09:49 Server05 kernel: ata2: PATA max UDMA/133 cmd 0xF0CE2280 ctl 0xF0CE22B8 bmdma 0x0 irq 11
Oct  6 15:09:49 Server05 kernel: ata3: PATA max UDMA/133 cmd 0xF0CE2300 ctl 0xF0CE2338 bmdma 0x0 irq 11
Oct  6 15:09:49 Server05 kernel: ata4: PATA max UDMA/133 cmd 0xF0CE2380 ctl 0xF0CE23B8 bmdma 0x0 irq 11
Oct  6 15:09:49 Server05 kernel: ata1: dev 0 ATA, max UDMA/133, 490234752 sectors: lba48
Oct  6 15:09:49 Server05 kernel: ata1: dev 0 configured for UDMA/33
Oct  6 15:09:49 Server05 kernel: scsi1 : sata_promise
Oct  6 15:09:49 Server05 kernel: ata2: dev 0 ATA, max UDMA/133, 490234752 sectors: lba48
Oct  6 15:09:49 Server05 kernel: ata2: dev 0 configured for UDMA/33
Oct  6 15:09:49 Server05 kernel: scsi2 : sata_promise
Oct  6 15:09:49 Server05 kernel: ata3: dev 0 ATA, max UDMA/133, 490234752 sectors: lba48
Oct  6 15:09:49 Server05 kernel: ata3: dev 0 configured for UDMA/33
Oct  6 15:09:49 Server05 kernel: scsi3 : sata_promise
Oct  6 15:09:49 Server05 kernel: ata4: dev 0 ATA, max UDMA/100, 488397168 sectors: lba48
Oct  6 15:09:49 Server05 kernel: ata4: dev 0 configured for UDMA/33
Oct  6 15:09:49 Server05 kernel: scsi4 : sata_promise
Oct  6 15:09:49 Server05 kernel:   Vendor: ATA       Model: Maxtor 6Y250P0    Rev: YAR4
Oct  6 15:09:49 Server05 kernel:   Type:   Direct-Access                      ANSI SCSI revision: 05
Oct  6 15:09:49 Server05 kernel: SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB)
Oct  6 15:09:49 Server05 kernel: SCSI device sda: drive cache: write through
Oct  6 15:09:49 Server05 kernel: SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB)
Oct  6 15:09:49 Server05 kernel: SCSI device sda: drive cache: write through
Oct  6 15:09:49 Server05 kernel:  sda: sda1
Oct  6 15:09:49 Server05 kernel: Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
Oct  6 15:09:49 Server05 kernel: Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0,  type 0
Oct  6 15:09:49 Server05 kernel:   Vendor: ATA       Model: Maxtor 6Y250P0    Rev: YAR4
Oct  6 15:09:49 Server05 kernel:   Type:   Direct-Access                      ANSI SCSI revision: 05
Oct  6 15:09:50 Server05 kernel: SCSI device sdb: 490234752 512-byte hdwr sectors (251000 MB)
Oct  6 15:09:50 Server05 kernel: SCSI device sdb: drive cache: write back
Oct  6 15:09:50 Server05 kernel: SCSI device sdb: 490234752 512-byte hdwr sectors (251000 MB)
Oct  6 15:09:50 Server05 kernel: SCSI device sdb: drive cache: write back
Oct  6 15:09:50 Server05 kernel:  sdb: sdb1
Oct  6 15:09:50 Server05 kernel: Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0
Oct  6 15:09:50 Server05 kernel: Attached scsi generic sg2 at scsi2, channel 0, id 0, lun 0,  type 0
Oct  6 15:09:50 Server05 kernel:   Vendor: ATA       Model: Maxtor 6Y250P0    Rev: YAR4
Oct  6 15:09:50 Server05 kernel:   Type:   Direct-Access                      ANSI SCSI revision: 05
Oct  6 15:09:50 Server05 kernel: SCSI device sdc: 490234752 512-byte hdwr sectors (251000 MB)
Oct  6 15:09:50 Server05 kernel: SCSI device sdc: drive cache: write through
Oct  6 15:09:50 Server05 kernel: SCSI device sdc: 490234752 512-byte hdwr sectors (251000 MB)
Oct  6 15:09:50 Server05 kernel: SCSI device sdc: drive cache: write through
Oct  6 15:09:50 Server05 kernel:  sdc: sdc1
Oct  6 15:09:50 Server05 kernel: Attached scsi disk sdc at scsi3, channel 0, id 0, lun 0
Oct  6 15:09:50 Server05 kernel: Attached scsi generic sg3 at scsi3, channel 0, id 0, lun 0,  type 0
Oct  6 15:09:50 Server05 kernel:   Vendor: ATA       Model: WDC WD2500JB-00F  Rev: 15.0
Oct  6 15:09:50 Server05 kernel:   Type:   Direct-Access                      ANSI SCSI revision: 05
Oct  6 15:09:50 Server05 kernel: SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB)
Oct  6 15:09:50 Server05 kernel: SCSI device sdd: drive cache: write back
Oct  6 15:09:50 Server05 kernel: SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB)
Oct  6 15:09:50 Server05 kernel: SCSI device sdd: drive cache: write back
Oct  6 15:09:50 Server05 kernel:  sdd: sdd1
Oct  6 15:09:50 Server05 kernel: Attached scsi disk sdd at scsi4, channel 0, id 0, lun 0
Oct  6 15:09:50 Server05 kernel: Attached scsi generic sg4 at scsi4, channel 0, id 0, lun 0,  type 0
*******************************************************************************************************
*******************************************************************************************************


   Thanks for all your excellent work and quick response,

	         ---( Nick Pasich )---



>Thanks Jeff.....
>
>I'll compile 2.6.14-rc3 and let you know what happens...
>
>             ---( Nick Pasich )---
>
>
>On Wed, Oct 05, 2005 at 06:13:29PM -0400, Jeff Garzik wrote:
>> Nick Pasich wrote:
>> >Jeff,
>> >
>> >
>> >I'm running Slackware 10.1 and have compiled linux-2.6.13.3 kernel
>> >with the sata_promise.c as kernel resident.
>> 
>> Should be fixed in 2.6.14-rcX...
>> 
>> 	Jeff
>> 
>> 
>> 

-- 
--------
WebSite: http://NickAndBarb.net
--------


^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2005-10-07 13:43 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-10-05 18:05 no device found for TX4000 Nick Pasich
2005-10-05 22:13 ` Jeff Garzik
2005-10-05 22:27   ` Nick Pasich
2005-10-07 13:43   ` Nick Pasich

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).