From mboxrd@z Thu Jan 1 00:00:00 1970 From: thomas schorpp Subject: Re: hdparm ATA Security Options return errors Date: Wed, 19 Oct 2005 18:24:47 +0200 Message-ID: <4356734F.6050303@gmx.de> References: <4353DBF1.1060001@gmx.de> <4353E257.5060104@gmx.de> <43540A36.2080404@rtr.ca> <4355FC28.2020704@gmx.de> <4356624A.2000307@rtr.ca> Reply-To: t.schorpp@gmx.de Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Return-path: Received: from pop.gmx.de ([213.165.64.20]:9434 "HELO mail.gmx.net") by vger.kernel.org with SMTP id S1751097AbVJSQZI (ORCPT ); Wed, 19 Oct 2005 12:25:08 -0400 In-Reply-To: <4356624A.2000307@rtr.ca> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Mark Lord Cc: linux-ide@vger.kernel.org Mark Lord wrote: > thomas schorpp wrote: > >> Mark Lord wrote: >> >>> I think the entire set of ATA security patches that were >>> sent to me for hdparm are bogus -- I lack the setup here >>> to try them, but another kind person is preparing patches >>> for hdparm to fix them. > > > hdparm-6.3 is now out, with working security commands. > > But there is still a bug deep in the IDE taskfile code > that sometimes causes problems. Someday I might have time > to dig deeper into the kernel and fix that issue. > > -ml > - > To unsubscribe from this list: send the line "unsubscribe linux-ide" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > > test01: vanilla kernel 2.6.13.4 no security enabled before, no passwort. hdparm --security-disable xxxx /dev/hde Oct 19 18:15:51 tom1 kernel: hde: status timeout: status=0xd0 { Busy } Oct 19 18:15:51 tom1 kernel: ide: failed opcode was: 0xf2 Oct 19 18:15:51 tom1 kernel: hde: no DRQ after issuing MULTWRITE_EXT Oct 19 18:15:51 tom1 kernel: hde: status error: status=0x00 { } Oct 19 18:15:51 tom1 kernel: ide: failed opcode was: 0xf6 Oct 19 18:15:51 tom1 kernel: hde: no DRQ after issuing MULTWRITE_EXT sync problem? ATA device, with non-removable media Model Number: ST3120026A Serial Number: 3JT4RYCB Firmware Revision: 8.01 Standards: Used: ATA/ATAPI-6 T13 1410D revision 2 Supported: 6 5 4 3 sil680 controller i'll test the SET commands on the older seagate