libata version 1.12 loaded.
sata_mv version 0.25
ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 56 (level, low) -> IRQ 21
sata_mv(0000:02:03.0) 32 slots 8 ports unknown mode IRQ via INTx
ata1: SATA max UDMA/133 cmd 0x0 ctl 0xF8CA2120 bmdma 0x0 irq 21
ata2: SATA max UDMA/133 cmd 0x0 ctl 0xF8CA4120 bmdma 0x0 irq 21
ata3: SATA max UDMA/133 cmd 0x0 ctl 0xF8CA6120 bmdma 0x0 irq 21
ata4: SATA max UDMA/133 cmd 0x0 ctl 0xF8CA8120 bmdma 0x0 irq 21
ata5: SATA max UDMA/133 cmd 0x0 ctl 0xF8CB2120 bmdma 0x0 irq 21
ata6: SATA max UDMA/133 cmd 0x0 ctl 0xF8CB4120 bmdma 0x0 irq 21
ata7: SATA max UDMA/133 cmd 0x0 ctl 0xF8CB6120 bmdma 0x0 irq 21
ata8: SATA max UDMA/133 cmd 0x0 ctl 0xF8CB8120 bmdma 0x0 irq 21
ATA: abnormal status 0x80 on port 0xF8CA211C
ATA: abnormal status 0x80 on port 0xF8CA211C
ATA: abnormal status 0x80 on port 0xF8CA211C
ATA: abnormal status 0x80 on port 0xF8CA211C
ATA: abnormal status 0x80 on port 0xF8CA211C
ATA: abnormal status 0x80 on port 0xF8CA211C
ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:407f
ata1: dev 0 ATA-7, max UDMA/133, 781422768 sectors: LBA48
ata1: dev 0 configured for UDMA/133
scsi0 : sata_mv
ATA: abnormal status 0x80 on port 0xF8CA411C
ATA: abnormal status 0x80 on port 0xF8CA411C
ATA: abnormal status 0x80 on port 0xF8CA411C
ATA: abnormal status 0x80 on port 0xF8CA411C
ATA: abnormal status 0x80 on port 0xF8CA411C
ata2: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:407f
ata2: dev 0 ATA-7, max UDMA/133, 781422768 sectors: LBA48
ata2: dev 0 configured for UDMA/133
scsi1 : sata_mv
ATA: abnormal status 0x80 on port 0xF8CA611C
ATA: abnormal status 0x80 on port 0xF8CA611C
ATA: abnormal status 0x80 on port 0xF8CA611C
ATA: abnormal status 0x80 on port 0xF8CA611C
ATA: abnormal status 0x80 on port 0xF8CA611C
ATA: abnormal status 0x80 on port 0xF8CA611C
ata3: PIO error, drv_stat 0x50
ata3: dev 0 cfg 49:0000 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0000
ata3: no dma
ata3: dev 0 not supported, ignoring
scsi2 : sata_mv
ATA: abnormal status 0x80 on port 0xF8CA811C
ATA: abnormal status 0x80 on port 0xF8CA811C
ATA: abnormal status 0x80 on port 0xF8CA811C
ATA: abnormal status 0x80 on port 0xF8CA811C
ATA: abnormal status 0x80 on port 0xF8CA811C
ATA: abnormal status 0x80 on port 0xF8CA811C
ata4: PIO error, drv_stat 0x50
ata4: dev 0 cfg 49:0000 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0000
ata4: no dma
ata4: dev 0 not supported, ignoring
scsi3 : sata_mv
ATA: abnormal status 0x80 on port 0xF8CB211C
ATA: abnormal status 0x80 on port 0xF8CB211C
ATA: abnormal status 0x80 on port 0xF8CB211C
ATA: abnormal status 0x80 on port 0xF8CB211C
ATA: abnormal status 0x80 on port 0xF8CB211C
ATA: abnormal status 0x80 on port 0xF8CB211C
ata5: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:407f
ata5: dev 0 ATA-7, max UDMA/133, 781422768 sectors: LBA48
ata5: dev 0 configured for UDMA/133
scsi4 : sata_mv
ATA: abnormal status 0x80 on port 0xF8CB411C
ATA: abnormal status 0x80 on port 0xF8CB411C
ATA: abnormal status 0x80 on port 0xF8CB411C
ATA: abnormal status 0x80 on port 0xF8CB411C
ATA: abnormal status 0x80 on port 0xF8CB411C
ATA: abnormal status 0x80 on port 0xF8CB411C
ata6: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:407f
ata6: dev 0 ATA-7, max UDMA/133, 781422768 sectors: LBA48
ata6: dev 0 configured for UDMA/133
scsi5 : sata_mv
ata7: no device found (phy stat 00000000)
scsi6 : sata_mv
ata8: no device found (phy stat 00000000)
scsi7 : sata_mv
  Vendor: ATA       Model: ST3400832AS       Rev: 3.03
  Type:   Direct-Access                      ANSI SCSI revision: 05
  Vendor: ATA       Model: ST3400832AS       Rev: 3.01
  Type:   Direct-Access                      ANSI SCSI revision: 05
  Vendor: ATA       Model: ST3400832AS       Rev: 3.01
  Type:   Direct-Access                      ANSI SCSI revision: 05
  Vendor: ATA       Model: ST3400832AS       Rev: 3.01
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sda: 781422768 512-byte hdwr sectors (400088 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 781422768 512-byte hdwr sectors (400088 MB)
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda3
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sdb: 781422768 512-byte hdwr sectors (400088 MB)
SCSI device sdb: drive cache: write back
SCSI device sdb: 781422768 512-byte hdwr sectors (400088 MB)
SCSI device sdb: drive cache: write back
 sdb: sdb1 sdb2 sdb3
Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
SCSI device sdc: 781422768 512-byte hdwr sectors (400088 MB)
SCSI device sdc: drive cache: write back
SCSI device sdc: 781422768 512-byte hdwr sectors (400088 MB)
SCSI device sdc: drive cache: write back
 sdc: sdc1 sdc2 sdc3
Attached scsi disk sdc at scsi4, channel 0, id 0, lun 0
SCSI device sdd: 781422768 512-byte hdwr sectors (400088 MB)
SCSI device sdd: drive cache: write back
SCSI device sdd: 781422768 512-byte hdwr sectors (400088 MB)
SCSI device sdd: drive cache: write back
 sdd: sdd1 sdd2 sdd3
Attached scsi disk sdd at scsi5, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0,  type 0
Attached scsi generic sg2 at scsi4, channel 0, id 0, lun 0,  type 0
Attached scsi generic sg3 at scsi5, channel 0, id 0, lun 0,  type 0
[...]
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 228k freed
Assertion failed! 0 == (sg_len & ~MV_DMA_BOUNDARY),drivers/scsi/sata_mv.c,mv_fill_sg,line=799
[... many lines identical to the above ...]