From: Jeff Garzik <jgarzik@pobox.com>
To: Bram Stolk <bram@sara.nl>
Cc: linux-ide@vger.kernel.org
Subject: Re: assertion failure in libata-core
Date: Sat, 29 Oct 2005 13:27:35 -0400 [thread overview]
Message-ID: <4363B107.2080209@pobox.com> (raw)
In-Reply-To: <4363ACDE.1060408@sara.nl>
Bram Stolk wrote:
> Hello,
>
>
> I've been trying very hard to get my sata dvd burner to work.
> It is a plextor PX-716SA.
>
> I tried the following kernels:
>
> linux-2.6.14-rc5
> linux-2.6.14
> linux-2.6.14-rc5-mm1 (contains sil24 support)
>
> All with the same result: assertion failure.
>
> Assertion failed! qc->flags &
> ATA_QCFLAG_ACTIVE,drivers/scsi/libata-core.c,ata_qc_complete,line=3232
>
> Now, my board has 2 sata interfaces: one from intel,
> and one from Sillicon Image.
>
> If I use libata.atapi_enabled=1 and connect the drive to the
> intel sata, I get the assertion mentioned above.
>
> If I connect the drive to the sil sata, it is not detected,
> and I get this error:
> sata_sil24 version 0.22
> ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 19 (level, low) -> IRQ 19
> PCI: Setting latency timer of device 0000:05:00.0 to 64
> ata5: SATA max UDMA/100 cmd 0xF8838000 ctl 0x0 bmdma 0x0 irq 19
> ata6: SATA max UDMA/100 cmd 0xF883A000 ctl 0x0 bmdma 0x0 irq 19
> ata5: no device found (phy stat 00000000)
> scsi4 : sata_sil24
> sata_sil24 ata6: error interrupt on port1
> stat=0x80000001 irq=0xb60002 cmd_err=1 sstatus=0x113 serror=0x0
> sata_sil24 ata6: resetting controller...
> scsi5 : sata_sil24
>
> How can I use this SATA DVD drive under linux on sata-ahci or sata-sil24?
Wait until we fix ATAPI, alas....
Your feedback here helps, though.
Jeff
prev parent reply other threads:[~2005-10-29 17:27 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-10-29 17:09 assertion failure in libata-core Bram Stolk
2005-10-29 17:27 ` Jeff Garzik [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4363B107.2080209@pobox.com \
--to=jgarzik@pobox.com \
--cc=bram@sara.nl \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).