From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefan Subject: Re: Serious IDE problem still present in 2.6.14 Date: Sun, 30 Oct 2005 19:57:28 +0100 Message-ID: <43651798.4010401@yahoo.de> References: <1130689871.6348.3.camel@montroll.chem.mcgill.ca> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Return-path: Received: from smtp014.mail.yahoo.com ([216.136.173.58]:13730 "HELO smtp014.mail.yahoo.com") by vger.kernel.org with SMTP id S932218AbVJ3S5g (ORCPT ); Sun, 30 Oct 2005 13:57:36 -0500 In-Reply-To: <1130689871.6348.3.camel@montroll.chem.mcgill.ca> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: David.Ronis@mcgill.ca Cc: Mark Hahn , linux-ide@vger.kernel.org Cool, I was about to ask you for that info, from a first look at your files it looks like you found a bug. I guess someone has to check for any changes in the atiixp driver since 2.6.12 and if there were no changes, find out what new feature broke the drivers logic. David Ronis wrote: >Hi Mark, > >I've copied the information you wanted below. > >First in 2.6.12.6: > >cat /proc/interrupts > CPU0 CPU1 > 0: 53375 1 IO-APIC-edge timer > 1: 47 2 IO-APIC-edge i8042 > 5: 1 0 IO-APIC-level ATI IXP > 8: 1 0 IO-APIC-edge rtc > 12: 127 0 IO-APIC-edge i8042 > 14: 4970 0 IO-APIC-edge ide0 > 15: 0 0 IO-APIC-edge ide1 > 16: 28 0 IO-APIC-level ohci_hcd:usb4, yenta, >ohci1394 > 17: 1 0 IO-APIC-level yenta > 18: 0 0 IO-APIC-level ohci_hcd:usb5 > 19: 2 0 IO-APIC-level eth0, ehci_hcd:usb1, >ohci_hcd:usb2, ohci_hcd:usb3 > 21: 43 0 IO-APIC-level acpi >NMI: 0 0 >LOC: 53271 53277 >ERR: 0 >MIS: 0 > >lspci -v >00:00.0 Host bridge: ATI Technologies Inc Radeon 9100 IGP Host Bridge >(rev 02) > Subsystem: ATI Technologies Inc: Unknown device 1234 > Flags: bus master, 66Mhz, medium devsel, latency 64 > Memory at d2000000 (32-bit, prefetchable) [size=32M] > Memory at d0000000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [a0] AGP version 3.0 > >00:01.0 PCI bridge: ATI Technologies Inc Radeon 9100 IGP AGP Bridge >(prog-if 00 [Normal decode]) > Flags: bus master, 66Mhz, medium devsel, latency 99 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=68 > I/O behind bridge: 00009000-00009fff > Memory behind bridge: d0100000-d01fffff > Prefetchable memory behind bridge: e0000000-efffffff > >00:13.0 USB Controller: ATI Technologies Inc OHCI USB Controller #1 (rev >01) (prog-if 10 [OHCI]) > Subsystem: ATI Technologies Inc: Unknown device 434c > Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 19 > Memory at d0001000 (32-bit, non-prefetchable) [size=4K] > >00:13.1 USB Controller: ATI Technologies Inc OHCI USB Controller #2 (rev >01) (prog-if 10 [OHCI]) > Subsystem: ATI Technologies Inc: Unknown device 434c > Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 19 > Memory at d0002000 (32-bit, non-prefetchable) [size=4K] > >00:14.0 SMBus: ATI Technologies Inc ATI SMBus (rev 16) > Subsystem: Hewlett-Packard Company: Unknown device 006b > Flags: 66Mhz, medium devsel > I/O ports at 8040 [size=16] > Memory at 58000000 (32-bit, non-prefetchable) [size=1K] > >00:14.1 IDE interface: ATI Technologies Inc ATI Dual Channel Bus Master >PCI IDE Controller (prog-if 8a [Master SecP PriP]) > Subsystem: ATI Technologies Inc ATI Dual Channel Bus Master PCI IDE >Controller > Flags: bus master, medium devsel, latency 64, IRQ 16 > I/O ports at > I/O ports at > I/O ports at > I/O ports at > I/O ports at 8060 [size=16] > >00:14.3 ISA bridge: ATI Technologies Inc: Unknown device 434c > Subsystem: ATI Technologies Inc: Unknown device 434c > Flags: bus master, 66Mhz, medium devsel, latency 0 > >00:14.4 PCI bridge: ATI Technologies Inc: Unknown device 4342 (prog-if >01 [Subtractive decode]) > Flags: bus master, 66Mhz, medium devsel, latency 64 > Bus: primary=00, secondary=02, subordinate=04, sec-latency=69 > I/O behind bridge: 0000a000-0000afff > Memory behind bridge: d0200000-d02fffff > >00:14.5 Multimedia audio controller: ATI Technologies Inc IXP150 AC'97 >Audio Controller > Subsystem: Hewlett-Packard Company: Unknown device 006b > Flags: bus master, 66Mhz, slow devsel, latency 64, IRQ 5 > Memory at d0003000 (32-bit, non-prefetchable) [size=256] > >00:14.6 Modem: ATI Technologies Inc IXP AC'97 Modem (rev 01) (prog-if 00 >[Generic]) > Subsystem: Hewlett-Packard Company: Unknown device 006b > Flags: 66Mhz, slow devsel, IRQ 5 > Memory at d0003400 (32-bit, non-prefetchable) [size=256] > >01:05.0 VGA compatible controller: ATI Technologies Inc RS300M AGP >[Radeon Mobility 9100IGP] (prog-if 00 [VGA]) > Subsystem: Hewlett-Packard Company: Unknown device 006b > Flags: bus master, fast Back2Back, 66Mhz, medium devsel, latency 66, >IRQ 10 > Memory at e0000000 (32-bit, prefetchable) [size=256M] > I/O ports at 9000 [size=256] > Memory at d0100000 (32-bit, non-prefetchable) [size=64K] > Expansion ROM at [disabled] [size=128K] > Capabilities: [58] AGP version 3.0 > Capabilities: [50] Power Management version 2 > >02:00.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 >IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI]) > Subsystem: Hewlett-Packard Company: Unknown device 006b > Flags: bus master, medium devsel, latency 64, IRQ 16 > Memory at d0208000 (32-bit, non-prefetchable) [size=2K] > Memory at d0200000 (32-bit, non-prefetchable) [size=16K] > Capabilities: [44] Power Management version 2 > >02:02.0 Network controller: Broadcom Corporation BCM4306 802.11b/g >Wireless LAN Controller (rev 03) > Subsystem: Hewlett-Packard Company: Unknown device 12f4 > Flags: bus master, fast devsel, latency 64, IRQ 5 > Memory at d0204000 (32-bit, non-prefetchable) [size=8K] > >02:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd. >RTL-8139/8139C/8139C+ (rev 10) > Subsystem: Hewlett-Packard Company: Unknown device 006b > Flags: bus master, medium devsel, latency 128, IRQ 19 > I/O ports at a000 [size=256] > Memory at d0208800 (32-bit, non-prefetchable) [size=256] > Capabilities: [50] Power Management version 2 > >02:04.0 CardBus bridge: Texas Instruments PCI1620 PC Card Controller >(rev 01) > Subsystem: Hewlett-Packard Company: Unknown device 006b > Flags: bus master, medium devsel, latency 168, IRQ 17 > Memory at 58001000 (32-bit, non-prefetchable) [size=4K] > Bus: primary=02, secondary=03, subordinate=06, sec-latency=176 > Memory window 0: 58400000-587ff000 (prefetchable) > Memory window 1: 58800000-58bff000 > I/O window 0: 00004000-000040ff > I/O window 1: 00004400-000044ff > 16-bit legacy interface ports at 0001 > >02:04.1 CardBus bridge: Texas Instruments PCI1620 PC Card Controller >(rev 01) > Subsystem: Hewlett-Packard Company: Unknown device 006b > Flags: bus master, medium devsel, latency 168, IRQ 16 > Memory at 58002000 (32-bit, non-prefetchable) [size=4K] > Bus: primary=02, secondary=07, subordinate=0a, sec-latency=176 > Memory window 0: 58c00000-58fff000 (prefetchable) > Memory window 1: 59000000-593ff000 > I/O window 0: 00004800-000048ff > I/O window 1: 00004c00-00004cff > 16-bit legacy interface ports at 0001 > >02:04.2 System peripheral: Texas Instruments PCI1620 Firmware Loading >Function (rev 01) > Subsystem: Hewlett-Packard Company: Unknown device 006b > Flags: bus master, medium devsel, latency 64 > I/O ports at a400 [size=64] > Capabilities: [44] Power Management version 2 > >02:07.0 USB Controller: NEC Corporation USB (rev 43) (prog-if 10 [OHCI]) > Subsystem: NEC Corporation USB > Flags: bus master, medium devsel, latency 64, IRQ 16 > Memory at d0206000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [40] Power Management version 2 > >02:07.1 USB Controller: NEC Corporation USB (rev 43) (prog-if 10 [OHCI]) > Subsystem: NEC Corporation USB > Flags: bus master, medium devsel, latency 64, IRQ 18 > Memory at d0207000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [40] Power Management version 2 > >02:07.2 USB Controller: NEC Corporation USB 2.0 (rev 04) (prog-if 20 >[EHCI]) > Subsystem: NEC Corporation USB 2.0 > Flags: bus master, medium devsel, latency 64, IRQ 19 > Memory at d0208c00 (32-bit, non-prefetchable) [size=256] > Capabilities: [40] Power Management version 2 > > >dmesg >Linux version 2.6.12.6 (root@montroll.lan) (gcc version 3.4.4) #4 SMP >Tue Aug 30 20:38:22 EDT 2005 >BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009f800 (usable) > BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000d0000 - 00000000000d8000 (reserved) > BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 0000000047f70000 (usable) > BIOS-e820: 0000000047f70000 - 0000000047f7d000 (ACPI data) > BIOS-e820: 0000000047f7d000 - 0000000047f80000 (ACPI NVS) > BIOS-e820: 0000000047f80000 - 0000000048000000 (reserved) > BIOS-e820: 0000000057f80000 - 0000000058000000 (reserved) > BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) > BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) > BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) >Warning only 896MB will be used. >Use a HIGHMEM enabled kernel. >896MB LOWMEM available. >found SMP MP-table at 000f6570 >On node 0 totalpages: 229376 > DMA zone: 4096 pages, LIFO batch:1 > Normal zone: 225280 pages, LIFO batch:31 > HighMem zone: 0 pages, LIFO batch:1 >DMI present. >ACPI: RSDP (v000 PTLTD ) @ 0x000f6600 >ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ >0x47f791c8 >ACPI: FADT (v001 HP Chinook 0x06040000 ATI 0x000f4240) @ >0x47f7ceed >ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ >0x47f7cf61 >ACPI: SSDT (v001 PTLTD ACPIHT 0x06040000 LTP 0x00000001) @ >0x47f7cfc9 >ACPI: DSDT (v001 HP SB200 0x06040000 INTL 0x20030509) @ >0x00000000 >ACPI: PM-Timer IO Port: 0x8008 >ACPI: Local APIC address 0xfee00000 >ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) >Processor #0 15:2 APIC version 20 >ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) >Processor #1 15:2 APIC version 20 >ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) >ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) >ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) >IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 >ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) >ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level) >ACPI: IRQ0 used by override. >ACPI: IRQ2 used by override. >Enabling APIC mode: Flat. Using 1 I/O APICs >Using ACPI (MADT) for SMP configuration information >Allocating PCI resources starting at 58000000 (gap: 58000000:a6c00000) >Built 1 zonelists >Kernel command line: BOOT_IMAGE=2.6.12.6 ro root=302 >mapped APIC to ffffd000 (fee00000) >mapped IOAPIC to ffffc000 (fec00000) >Initializing CPU#0 >PID hash table entries: 4096 (order: 12, 65536 bytes) >Detected 3000.728 MHz processor. >Using pmtmr for high-res timesource >Console: colour VGA+ 80x25 >Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) >Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) >Memory: 906084k/917504k available (1695k kernel code, 10908k reserved, >737k data, 192k init, 0k highmem) >Checking if this processor honours the WP bit even in supervisor mode... >Ok. >Calibrating delay loop... 5963.77 BogoMIPS (lpj=2981888) >Mount-cache hash table entries: 512 >CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 >00004400 00000000 00000000 >CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 >00004400 00000000 00000000 >CPU: Trace cache: 12K uops, L1 D cache: 8K >CPU: L2 cache: 512K >CPU: Physical Processor ID: 0 >CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 >00000000 00000000 >Intel machine check architecture supported. >Intel machine check reporting enabled on CPU#0. >CPU0: Intel P4/Xeon Extended MCE MSRs (12) available >CPU0: Thermal monitoring enabled >Enabling fast FPU save and restore... done. >Enabling unmasked SIMD FPU exception support... done. >Checking 'hlt' instruction... OK. >CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09 >Booting processor 1/1 eip 3000 >Initializing CPU#1 >Calibrating delay loop... 5996.54 BogoMIPS (lpj=2998272) >CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 >00004400 00000000 00000000 >CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 >00004400 00000000 00000000 >CPU: Trace cache: 12K uops, L1 D cache: 8K >CPU: L2 cache: 512K >CPU: Physical Processor ID: 0 >CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 >00000000 00000000 >Intel machine check architecture supported. >Intel machine check reporting enabled on CPU#1. >CPU1: Intel P4/Xeon Extended MCE MSRs (12) available >CPU1: Thermal monitoring enabled >CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09 >Total of 2 processors activated (11960.32 BogoMIPS). >ENABLING IO-APIC IRQs >..TIMER: vector=0x31 pin1=2 pin2=-1 >checking TSC synchronization across 2 CPUs: passed. >Brought up 2 CPUs >CPU0 attaching sched-domain: > domain 0: span 3 > groups: 1 2 > domain 1: span 3 > groups: 3 >CPU1 attaching sched-domain: > domain 0: span 3 > groups: 2 1 > domain 1: span 3 > groups: 3 >NET: Registered protocol family 16 >PCI: PCI BIOS revision 2.10 entry at 0xfd968, last bus=2 >PCI: Using configuration type 1 >mtrr: v2.0 (20020519) >ACPI: Subsystem revision 20050309 >ACPI: Interpreter enabled >ACPI: Using IOAPIC for interrupt routing >ACPI: PCI Root Bridge [PCI0] (0000:00) >PCI: Probing PCI hardware (bus 00) >PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1 >Boot video device is 0000:01:05.0 >PCI: Transparent bridge - 0000:00:14.4 >ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] >ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] >ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] >ACPI: PCI Interrupt Link [LNK0] (IRQs 5 10 11) *0, disabled. >ACPI: PCI Interrupt Link [LNK1] (IRQs 5 10 11) *0, disabled. >ACPI: PCI Interrupt Link [LNK2] (IRQs 5 10 11) *0, disabled. >ACPI: PCI Interrupt Link [LNK3] (IRQs 5 10 11) *0, disabled. >ACPI: Embedded Controller [EC0] (gpe 6) >PCI: Using ACPI for IRQ routing >PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a >report >Machine check exception polling timer started. >Initializing Cryptographic API >ACPI: AC Adapter [ACAD] (on-line) >ACPI: Battery Slot [BAT1] (battery present) >ACPI: Power Button (FF) [PWRF] >ACPI: Lid Switch [LID] >ACPI: Thermal Zone [THRM] (52 C) >Real Time Clock Driver v1.12 >i8042.c: Detected active multiplexing controller, rev 1.1. >serio: i8042 AUX0 port at 0x60,0x64 irq 12 >serio: i8042 AUX1 port at 0x60,0x64 irq 12 >serio: i8042 AUX2 port at 0x60,0x64 irq 12 >serio: i8042 AUX3 port at 0x60,0x64 irq 12 >serio: i8042 KBD port at 0x60,0x64 irq 1 >io scheduler noop registered >io scheduler anticipatory registered >io scheduler deadline registered >io scheduler cfq registered >Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 >ide: Assuming 33MHz system bus speed for PIO modes; override with >idebus=xx >ATIIXP: IDE controller at PCI slot 0000:00:14.1 >ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 >ATIIXP: chipset revision 0 >ATIIXP: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0x8060-0x8067, BIOS settings: hda:DMA, hdb:pio > ide1: BM-DMA at 0x8068-0x806f, BIOS settings: hdc:DMA, hdd:pio >Probing IDE interface ide0... >hda: ST9100823A, ATA DISK drive >ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 >Probing IDE interface ide1... >hdc: SD-R2512, ATAPI CD/DVD-ROM drive >ide1 at 0x170-0x177,0x376 on irq 15 >Probing IDE interface ide2... >Probing IDE interface ide3... >Probing IDE interface ide4... >Probing IDE interface ide5... >hda: max request size: 128KiB >hda: 195371568 sectors (100030 MB) w/8192KiB Cache, CHS=65535/16/63, >UDMA(100) >hda: cache flushes supported > hda: hda1 hda2 >mice: PS/2 mouse device common for all mice >input: PC Speaker >NET: Registered protocol family 2 >IP: routing cache hash table of 4096 buckets, 64Kbytes >TCP established hash table entries: 131072 (order: 9, 2097152 bytes) >TCP bind hash table entries: 65536 (order: 7, 786432 bytes) >TCP: Hash tables configured (established 131072 bind 65536) >NET: Registered protocol family 1 >NET: Registered protocol family 15 >ACPI wakeup devices: >ELAN USB0 USB1 USB2 KBC0 MSE0 >ACPI: (supports S0 S3 S4 S5) >kjournald starting. Commit interval 5 seconds >EXT3-fs: mounted filesystem with ordered data mode. >VFS: Mounted root (ext3 filesystem) readonly. >Freeing unused kernel memory: 192k freed >input: AT Translated Set 2 keyboard on isa0060/serio0 >alps.c: Enabling hardware tapping >input: PS/2 Mouse on isa0060/serio4 >input: AlpsPS/2 ALPS GlidePoint on isa0060/serio4 >Adding 977216k swap on /dev/hda1. Priority:-1 extents:1 >EXT3 FS on hda2, internal journal >Linux agpgart interface v0.101 (c) Dave Jones >8139too Fast Ethernet driver 0.9.27 >ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 19 (level, low) -> IRQ 19 >eth0: RealTek RTL8139 at 0xa000, 00:0f:b0:01:82:2d, IRQ 19 >eth0: Identified 8139 chip type 'RTL-8101' >eth0: link up, 10Mbps, half-duplex, lpa 0x0000 >usbcore: registered new driver usbfs >usbcore: registered new driver hub >ACPI: PCI Interrupt 0000:02:07.2[C] -> GSI 19 (level, low) -> IRQ 19 >ehci_hcd 0000:02:07.2: NEC Corporation USB 2.0 >ehci_hcd 0000:02:07.2: new USB bus registered, assigned bus number 1 >ehci_hcd 0000:02:07.2: irq 19, io mem 0xd0208c00 >ehci_hcd 0000:02:07.2: park 0 >ehci_hcd 0000:02:07.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec >2004 >hub 1-0:1.0: USB hub found >hub 1-0:1.0: 5 ports detected >ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) >ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19 >ohci_hcd 0000:00:13.0: ATI Technologies Inc OHCI USB Controller #1 >ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 >ohci_hcd 0000:00:13.0: irq 19, io mem 0xd0001000 >hub 2-0:1.0: USB hub found >hub 2-0:1.0: 3 ports detected >ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19 >ohci_hcd 0000:00:13.1: ATI Technologies Inc OHCI USB Controller #2 >ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 >ohci_hcd 0000:00:13.1: irq 19, io mem 0xd0002000 >hub 3-0:1.0: USB hub found >hub 3-0:1.0: 3 ports detected >ACPI: PCI Interrupt 0000:02:07.0[A] -> GSI 16 (level, low) -> IRQ 16 >ohci_hcd 0000:02:07.0: NEC Corporation USB >ohci_hcd 0000:02:07.0: new USB bus registered, assigned bus number 4 >ohci_hcd 0000:02:07.0: irq 16, io mem 0xd0206000 >hub 4-0:1.0: USB hub found >hub 4-0:1.0: 3 ports detected >ACPI: PCI Interrupt 0000:02:07.1[B] -> GSI 18 (level, low) -> IRQ 18 >ohci_hcd 0000:02:07.1: NEC Corporation USB (#2) >ohci_hcd 0000:02:07.1: new USB bus registered, assigned bus number 5 >ohci_hcd 0000:02:07.1: irq 18, io mem 0xd0207000 >hub 5-0:1.0: USB hub found >hub 5-0:1.0: 2 ports detected >usb 4-1: new low speed USB device using ohci_hcd and address 2 >Linux Kernel Card Services > options: [pci] [cardbus] [pm] >ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 17 (level, low) -> IRQ 17 >Yenta: CardBus bridge found at 0000:02:04.0 [103c:006b] >Yenta: Enabling burst memory read transactions >Yenta: Using CSCINT to route CSC interrupts to PCI >Yenta: Routing CardBus interrupts to PCI >Yenta TI: socket 0000:02:04.0, mfunc 0x01111d22, devctl 0x64 >Yenta: ISA IRQ mask 0x0ed8, PCI irq 17 >Socket status: 30000006 >ACPI: PCI Interrupt 0000:02:04.1[B] -> GSI 16 (level, low) -> IRQ 16 >Yenta: CardBus bridge found at 0000:02:04.1 [103c:006b] >Yenta: Using CSCINT to route CSC interrupts to PCI >Yenta: Routing CardBus interrupts to PCI >Yenta TI: socket 0000:02:04.1, mfunc 0x01111d22, devctl 0x64 >input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:02:07.0-1 >usbcore: registered new driver usbhid >drivers/usb/input/hid-core.c: v2.01:USB HID core driver >Yenta: ISA IRQ mask 0x0ed8, PCI irq 16 >Socket status: 30000006 >ieee1394: Initialized config rom entry `ip1394' >ohci1394: $Rev: 1250 $ Ben Collins >ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 >ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] >MMIO=[d0208000-d02087ff] Max Packet=[2048] >Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing >disabled >ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 5 (level, low) -> IRQ 5 >ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 5 (level, low) -> IRQ 5 >agpgart: Detected Ati IGP9100/M chipset >agpgart: AGP aperture is 32M @ 0xd2000000 >ieee1394: Host added: ID:BUS[0-00:1023] GUID[463f02005c594058] >eth1394: $Rev: 1247 $ Ben Collins >eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) >USB Universal Host Controller Interface driver v2.2 >ip_tables: (C) 2000-2002 Netfilter core team >ip_conntrack version 2.1 (7168 buckets, 57344 max) - 256 bytes per >conntrack >Installing knfsd (copyright (C) 1996 okir@monad.swb.de). > >Now in 2.6.14: > >cat /proc/interrupts > CPU0 CPU1 > 0: 345156 3 IO-APIC-edge timer > 1: 51 2 IO-APIC-edge i8042 > 5: 1 0 IO-APIC-level ATI IXP > 8: 1 0 IO-APIC-edge rtc > 12: 121 0 IO-APIC-edge i8042 > 14: 5474 0 IO-APIC-edge ide0 > 15: 0 0 IO-APIC-edge ide1 > 16: 1 0 IO-APIC-level yenta > 17: 29 0 IO-APIC-level ohci_hcd:usb4, yenta, >ohci1394 > 18: 2 0 IO-APIC-level eth0, ehci_hcd:usb1, >ohci_hcd:usb2, ohci_hcd:usb3 > 19: 0 0 IO-APIC-level ohci_hcd:usb5 > 21: 40 0 IO-APIC-level acpi >NMI: 0 0 >LOC: 345004 345037 >ERR: 0 >MIS: 0 > >lspci -v >00:00.0 Host bridge: ATI Technologies Inc Radeon 9100 IGP Host Bridge >(rev 02) > Subsystem: ATI Technologies Inc: Unknown device 1234 > Flags: bus master, 66Mhz, medium devsel, latency 64 > Memory at d2000000 (32-bit, prefetchable) [size=32M] > Memory at d0000000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [a0] AGP version 3.0 > >00:01.0 PCI bridge: ATI Technologies Inc Radeon 9100 IGP AGP Bridge >(prog-if 00 [Normal decode]) > Flags: bus master, 66Mhz, medium devsel, latency 99 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=68 > I/O behind bridge: 00009000-00009fff > Memory behind bridge: d0100000-d01fffff > Prefetchable memory behind bridge: e0000000-efffffff > >00:13.0 USB Controller: ATI Technologies Inc OHCI USB Controller #1 (rev >01) (prog-if 10 [OHCI]) > Subsystem: ATI Technologies Inc: Unknown device 434c > Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 18 > Memory at d0001000 (32-bit, non-prefetchable) [size=4K] > >00:13.1 USB Controller: ATI Technologies Inc OHCI USB Controller #2 (rev >01) (prog-if 10 [OHCI]) > Subsystem: ATI Technologies Inc: Unknown device 434c > Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 18 > Memory at d0002000 (32-bit, non-prefetchable) [size=4K] > >00:14.0 SMBus: ATI Technologies Inc ATI SMBus (rev 16) > Subsystem: Hewlett-Packard Company: Unknown device 006b > Flags: 66Mhz, medium devsel > I/O ports at 8040 [size=16] > Memory at 64000000 (32-bit, non-prefetchable) [size=1K] > >00:14.1 IDE interface: ATI Technologies Inc ATI Dual Channel Bus Master >PCI IDE Controller (prog-if 8a [Master SecP PriP]) > Subsystem: ATI Technologies Inc ATI Dual Channel Bus Master PCI IDE >Controller > Flags: bus master, medium devsel, latency 64, IRQ 17 > I/O ports at > I/O ports at > I/O ports at > I/O ports at > I/O ports at 8060 [size=16] > >00:14.3 ISA bridge: ATI Technologies Inc: Unknown device 434c > Subsystem: ATI Technologies Inc: Unknown device 434c > Flags: bus master, 66Mhz, medium devsel, latency 0 > >00:14.4 PCI bridge: ATI Technologies Inc: Unknown device 4342 (prog-if >01 [Subtractive decode]) > Flags: bus master, 66Mhz, medium devsel, latency 64 > Bus: primary=00, secondary=02, subordinate=04, sec-latency=69 > I/O behind bridge: 0000a000-0000afff > Memory behind bridge: d0200000-d02fffff > Prefetchable memory behind bridge: 60000000-63ffffff > >00:14.5 Multimedia audio controller: ATI Technologies Inc IXP150 AC'97 >Audio Controller > Subsystem: Hewlett-Packard Company: Unknown device 006b > Flags: bus master, 66Mhz, slow devsel, latency 64, IRQ 5 > Memory at d0003000 (32-bit, non-prefetchable) [size=256] > >00:14.6 Modem: ATI Technologies Inc IXP AC'97 Modem (rev 01) (prog-if 00 >[Generic]) > Subsystem: Hewlett-Packard Company: Unknown device 006b > Flags: 66Mhz, slow devsel, IRQ 5 > Memory at d0003400 (32-bit, non-prefetchable) [size=256] > >01:05.0 VGA compatible controller: ATI Technologies Inc RS300M AGP >[Radeon Mobility 9100IGP] (prog-if 00 [VGA]) > Subsystem: Hewlett-Packard Company: Unknown device 006b > Flags: bus master, fast Back2Back, 66Mhz, medium devsel, latency 66, >IRQ 10 > Memory at e0000000 (32-bit, prefetchable) [size=256M] > I/O ports at 9000 [size=256] > Memory at d0100000 (32-bit, non-prefetchable) [size=64K] > Expansion ROM at d0120000 [disabled] [size=128K] > Capabilities: [58] AGP version 3.0 > Capabilities: [50] Power Management version 2 > >02:00.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 >IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI]) > Subsystem: Hewlett-Packard Company: Unknown device 006b > Flags: bus master, medium devsel, latency 64, IRQ 17 > Memory at d0208000 (32-bit, non-prefetchable) [size=2K] > Memory at d0200000 (32-bit, non-prefetchable) [size=16K] > Capabilities: [44] Power Management version 2 > >02:02.0 Network controller: Broadcom Corporation BCM4306 802.11b/g >Wireless LAN Controller (rev 03) > Subsystem: Hewlett-Packard Company: Unknown device 12f4 > Flags: bus master, fast devsel, latency 64, IRQ 5 > Memory at d0204000 (32-bit, non-prefetchable) [size=8K] > >02:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd. >RTL-8139/8139C/8139C+ (rev 10) > Subsystem: Hewlett-Packard Company: Unknown device 006b > Flags: bus master, medium devsel, latency 128, IRQ 18 > I/O ports at a000 [size=256] > Memory at d0208800 (32-bit, non-prefetchable) [size=256] > Capabilities: [50] Power Management version 2 > >02:04.0 CardBus bridge: Texas Instruments PCI1620 PC Card Controller >(rev 01) > Subsystem: Hewlett-Packard Company: Unknown device 006b > Flags: bus master, medium devsel, latency 168, IRQ 16 > Memory at d0209000 (32-bit, non-prefetchable) [size=4K] > Bus: primary=02, secondary=03, subordinate=06, sec-latency=176 > Memory window 0: 60000000-61fff000 (prefetchable) > Memory window 1: 66000000-67fff000 > I/O window 0: 0000a800-0000a8ff > I/O window 1: 0000ac00-0000acff > 16-bit legacy interface ports at 0001 > >02:04.1 CardBus bridge: Texas Instruments PCI1620 PC Card Controller >(rev 01) > Subsystem: Hewlett-Packard Company: Unknown device 006b > Flags: bus master, medium devsel, latency 168, IRQ 17 > Memory at d020a000 (32-bit, non-prefetchable) [size=4K] > Bus: primary=02, secondary=07, subordinate=0a, sec-latency=176 > Memory window 0: 62000000-63fff000 (prefetchable) > Memory window 1: 68000000-69fff000 > I/O window 0: 00001400-000014ff > I/O window 1: 00001800-000018ff > 16-bit legacy interface ports at 0001 > >02:04.2 System peripheral: Texas Instruments PCI1620 Firmware Loading >Function (rev 01) > Subsystem: Hewlett-Packard Company: Unknown device 006b > Flags: bus master, medium devsel, latency 64 > I/O ports at a400 [size=64] > Capabilities: [44] Power Management version 2 > >02:07.0 USB Controller: NEC Corporation USB (rev 43) (prog-if 10 [OHCI]) > Subsystem: NEC Corporation USB > Flags: bus master, medium devsel, latency 64, IRQ 17 > Memory at d0206000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [40] Power Management version 2 > >02:07.1 USB Controller: NEC Corporation USB (rev 43) (prog-if 10 [OHCI]) > Subsystem: NEC Corporation USB > Flags: bus master, medium devsel, latency 64, IRQ 19 > Memory at d0207000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [40] Power Management version 2 > >02:07.2 USB Controller: NEC Corporation USB 2.0 (rev 04) (prog-if 20 >[EHCI]) > Subsystem: NEC Corporation USB 2.0 > Flags: bus master, medium devsel, latency 64, IRQ 18 > Memory at d0208c00 (32-bit, non-prefetchable) [size=256] > Capabilities: [40] Power Management version 2 > > >dmesg >Linux version 2.6.14 (root@montroll) (gcc version 4.0.2) #10 SMP Fri Oct >28 15:56:01 EDT 2005 >BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009f800 (usable) > BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000d0000 - 00000000000d8000 (reserved) > BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 0000000047f70000 (usable) > BIOS-e820: 0000000047f70000 - 0000000047f7d000 (ACPI data) > BIOS-e820: 0000000047f7d000 - 0000000047f80000 (ACPI NVS) > BIOS-e820: 0000000047f80000 - 0000000048000000 (reserved) > BIOS-e820: 0000000057f80000 - 0000000058000000 (reserved) > BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) > BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) > BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) >Warning only 896MB will be used. >Use a HIGHMEM enabled kernel. >896MB LOWMEM available. >found SMP MP-table at 000f6570 >On node 0 totalpages: 229376 > DMA zone: 4096 pages, LIFO batch:1 > Normal zone: 225280 pages, LIFO batch:31 > HighMem zone: 0 pages, LIFO batch:1 >DMI present. >ACPI: RSDP (v000 PTLTD ) @ 0x000f6600 >ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ >0x47f791c8 >ACPI: FADT (v001 HP Chinook 0x06040000 ATI 0x000f4240) @ >0x47f7ceed >ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ >0x47f7cf61 >ACPI: SSDT (v001 PTLTD ACPIHT 0x06040000 LTP 0x00000001) @ >0x47f7cfc9 >ACPI: DSDT (v001 HP SB200 0x06040000 INTL 0x20030509) @ >0x00000000 >ACPI: PM-Timer IO Port: 0x8008 >ACPI: Local APIC address 0xfee00000 >ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) >Processor #0 15:2 APIC version 20 >ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) >Processor #1 15:2 APIC version 20 >ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) >ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) >ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) >IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 >ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) >ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level) >ACPI: IRQ0 used by override. >ACPI: IRQ2 used by override. >Enabling APIC mode: Flat. Using 1 I/O APICs >Using ACPI (MADT) for SMP configuration information >Allocating PCI resources starting at 60000000 (gap: 58000000:a6c00000) >Built 1 zonelists >Kernel command line: BOOT_IMAGE=2.6.14 ro root=302 >mapped APIC to ffffd000 (fee00000) >mapped IOAPIC to ffffc000 (fec00000) >Initializing CPU#0 >PID hash table entries: 4096 (order: 12, 65536 bytes) >Detected 3000.911 MHz processor. >Using pmtmr for high-res timesource >Console: colour VGA+ 80x25 >Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) >Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) >Memory: 906284k/917504k available (1696k kernel code, 10708k reserved, >531k data, 188k init, 0k highmem) >Checking if this processor honours the WP bit even in supervisor mode... >Ok. >Calibrating delay using timer specific routine.. 6002.40 BogoMIPS >(lpj=3001201) >Mount-cache hash table entries: 512 >CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 >00004400 00000000 00000000 >CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 >00004400 00000000 00000000 >CPU: Trace cache: 12K uops, L1 D cache: 8K >CPU: L2 cache: 512K >CPU: Physical Processor ID: 0 >CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 >00000000 00000000 >Intel machine check architecture supported. >Intel machine check reporting enabled on CPU#0. >CPU0: Intel P4/Xeon Extended MCE MSRs (12) available >CPU0: Thermal monitoring enabled >mtrr: v2.0 (20020519) >Enabling fast FPU save and restore... done. >Enabling unmasked SIMD FPU exception support... done. >Checking 'hlt' instruction... OK. >CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09 >Booting processor 1/1 eip 2000 >Initializing CPU#1 >Calibrating delay using timer specific routine.. 5999.46 BogoMIPS >(lpj=2999730) >CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 >00004400 00000000 00000000 >CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 >00004400 00000000 00000000 >CPU: Trace cache: 12K uops, L1 D cache: 8K >CPU: L2 cache: 512K >CPU: Physical Processor ID: 0 >CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 >00000000 00000000 >Intel machine check architecture supported. >Intel machine check reporting enabled on CPU#1. >CPU1: Intel P4/Xeon Extended MCE MSRs (12) available >CPU1: Thermal monitoring enabled >CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09 >Total of 2 processors activated (12001.86 BogoMIPS). >ENABLING IO-APIC IRQs >..TIMER: vector=0x31 pin1=2 pin2=-1 >checking TSC synchronization across 2 CPUs: passed. >softlockup thread 0 started up. >Brought up 2 CPUs >softlockup thread 1 started up. >NET: Registered protocol family 16 >ACPI: bus type pci registered >PCI: PCI BIOS revision 2.10 entry at 0xfd968, last bus=2 >PCI: Using configuration type 1 >ACPI: Subsystem revision 20050902 >ACPI: Interpreter enabled >ACPI: Using IOAPIC for interrupt routing >ACPI: PCI Root Bridge [PCI0] (0000:00) >PCI: Probing PCI hardware (bus 00) >ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 >PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1 >Boot video device is 0000:01:05.0 >PCI: Transparent bridge - 0000:00:14.4 >ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] >ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] >ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] >ACPI: PCI Interrupt Link [LNK0] (IRQs 5 10 11) *0, disabled. >ACPI: PCI Interrupt Link [LNK1] (IRQs 5 10 11) *0, disabled. >ACPI: PCI Interrupt Link [LNK2] (IRQs 5 10 11) *0, disabled. >ACPI: PCI Interrupt Link [LNK3] (IRQs 5 10 11) *0, disabled. >ACPI: Embedded Controller [EC0] (gpe 6) >PCI: Using ACPI for IRQ routing >PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a >report >PCI: Bridge: 0000:00:01.0 > IO window: 9000-9fff > MEM window: d0100000-d01fffff > PREFETCH window: e0000000-efffffff >PCI: Bus 3, cardbus bridge: 0000:02:04.0 > IO window: 0000a800-0000a8ff > IO window: 0000ac00-0000acff > PREFETCH window: 60000000-61ffffff > MEM window: 66000000-67ffffff >PCI: Bus 7, cardbus bridge: 0000:02:04.1 > IO window: 00001400-000014ff > IO window: 00001800-000018ff > PREFETCH window: 62000000-63ffffff > MEM window: 68000000-69ffffff >PCI: Bridge: 0000:00:14.4 > IO window: a000-afff > MEM window: d0200000-d02fffff > PREFETCH window: 60000000-63ffffff >ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 17 (level, low) -> IRQ 16 >ACPI: PCI Interrupt 0000:02:04.1[B] -> GSI 16 (level, low) -> IRQ 17 >Machine check exception polling timer started. >Initializing Cryptographic API >ACPI: AC Adapter [ACAD] (on-line) >ACPI: Battery Slot [BAT1] (battery present) >ACPI: Power Button (FF) [PWRF] >ACPI: Lid Switch [LID] >ACPI: Power Button (CM) [PWRB] >ACPI: CPU0 (power states: C1[C1] C2[C2]) >ACPI: CPU1 (power states: C1[C1] C2[C2]) >ACPI: Thermal Zone [THRM] (52 C) >Real Time Clock Driver v1.12 >i8042.c: Detected active multiplexing controller, rev 1.1. >serio: i8042 AUX0 port at 0x60,0x64 irq 12 >serio: i8042 AUX1 port at 0x60,0x64 irq 12 >serio: i8042 AUX2 port at 0x60,0x64 irq 12 >serio: i8042 AUX3 port at 0x60,0x64 irq 12 >serio: i8042 KBD port at 0x60,0x64 irq 1 >io scheduler noop registered >io scheduler anticipatory registered >io scheduler deadline registered >io scheduler cfq registered >Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 >ide: Assuming 33MHz system bus speed for PIO modes; override with >idebus=xx >ATIIXP: IDE controller at PCI slot 0000:00:14.1 >ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 17 >ATIIXP: chipset revision 0 >ATIIXP: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0x8060-0x8067, BIOS settings: hda:DMA, hdb:pio > ide1: BM-DMA at 0x8068-0x806f, BIOS settings: hdc:DMA, hdd:pio >Probing IDE interface ide0... >hda: ST9100823A, ATA DISK drive >ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 >Probing IDE interface ide1... >hdc: SD-R2512, ATAPI CD/DVD-ROM drive >ide1 at 0x170-0x177,0x376 on irq 15 >hda: max request size: 128KiB >hda: 195371568 sectors (100030 MB) w/8192KiB Cache, CHS=65535/16/63, >UDMA(100) >hda: cache flushes supported > hda: hda1 hda2 >mice: PS/2 mouse device common for all mice >input: PC Speaker >NET: Registered protocol family 2 >IP route cache hash table entries: 32768 (order: 5, 131072 bytes) >TCP established hash table entries: 131072 (order: 8, 1048576 bytes) >TCP bind hash table entries: 65536 (order: 7, 524288 bytes) >TCP: Hash tables configured (established 131072 bind 65536) >TCP reno registered >TCP bic registered >NET: Registered protocol family 1 >NET: Registered protocol family 15 >Using IPI Shortcut mode >kjournald starting. Commit interval 5 seconds >input: AT Translated Set 2 keyboard on isa0060/serio0 >EXT3-fs: mounted filesystem with ordered data mode. >VFS: Mounted root (ext3 filesystem) readonly. >Freeing unused kernel memory: 188k freed >input: PS/2 Mouse on isa0060/serio4 >input: AlpsPS/2 ALPS GlidePoint on isa0060/serio4 >Adding 977216k swap on /dev/hda1. Priority:-1 extents:1 across:977216k >EXT3 FS on hda2, internal journal >Linux agpgart interface v0.101 (c) Dave Jones >8139too Fast Ethernet driver 0.9.27 >ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 19 (level, low) -> IRQ 18 >eth0: RealTek RTL8139 at 0xa000, 00:0f:b0:01:82:2d, IRQ 18 >eth0: Identified 8139 chip type 'RTL-8101' >eth0: link up, 10Mbps, half-duplex, lpa 0x0000 >usbcore: registered new driver usbfs >usbcore: registered new driver hub >ACPI: PCI Interrupt 0000:02:07.2[C] -> GSI 19 (level, low) -> IRQ 18 >ehci_hcd 0000:02:07.2: EHCI Host Controller >ehci_hcd 0000:02:07.2: new USB bus registered, assigned bus number 1 >ehci_hcd 0000:02:07.2: irq 18, io mem 0xd0208c00 >ehci_hcd 0000:02:07.2: park 0 >ehci_hcd 0000:02:07.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec >2004 >hub 1-0:1.0: USB hub found >hub 1-0:1.0: 5 ports detected >ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver >(PCI) >ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 18 >ohci_hcd 0000:00:13.0: OHCI Host Controller >ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 >ohci_hcd 0000:00:13.0: irq 18, io mem 0xd0001000 >hub 2-0:1.0: USB hub found >hub 2-0:1.0: 3 ports detected >ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 18 >ohci_hcd 0000:00:13.1: OHCI Host Controller >ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 >ohci_hcd 0000:00:13.1: irq 18, io mem 0xd0002000 >hub 3-0:1.0: USB hub found >hub 3-0:1.0: 3 ports detected >ACPI: PCI Interrupt 0000:02:07.0[A] -> GSI 16 (level, low) -> IRQ 17 >ohci_hcd 0000:02:07.0: OHCI Host Controller >ohci_hcd 0000:02:07.0: new USB bus registered, assigned bus number 4 >ohci_hcd 0000:02:07.0: irq 17, io mem 0xd0206000 >hub 4-0:1.0: USB hub found >hub 4-0:1.0: 3 ports detected >ACPI: PCI Interrupt 0000:02:07.1[B] -> GSI 18 (level, low) -> IRQ 19 >ohci_hcd 0000:02:07.1: OHCI Host Controller >ohci_hcd 0000:02:07.1: new USB bus registered, assigned bus number 5 >ohci_hcd 0000:02:07.1: irq 19, io mem 0xd0207000 >hub 5-0:1.0: USB hub found >hub 5-0:1.0: 2 ports detected >usb 4-1: new low speed USB device using ohci_hcd and address 2 >ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 17 (level, low) -> IRQ 16 >Yenta: CardBus bridge found at 0000:02:04.0 [103c:006b] >Yenta: Enabling burst memory read transactions >Yenta: Using CSCINT to route CSC interrupts to PCI >Yenta: Routing CardBus interrupts to PCI >Yenta TI: socket 0000:02:04.0, mfunc 0x01111d22, devctl 0x64 >Yenta: ISA IRQ mask 0x0ed8, PCI irq 16 >Socket status: 30000086 >pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff >pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff >pcmcia: parent PCI bridge Memory window: 0x60000000 - 0x63ffffff >ACPI: PCI Interrupt 0000:02:04.1[B] -> GSI 16 (level, low) -> IRQ 17 >Yenta: CardBus bridge found at 0000:02:04.1 [103c:006b] >Yenta: Using CSCINT to route CSC interrupts to PCI >Yenta: Routing CardBus interrupts to PCI >Yenta TI: socket 0000:02:04.1, mfunc 0x01111d22, devctl 0x64 >input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:02:07.0-1 >usbcore: registered new driver usbhid >drivers/usb/input/hid-core.c: v2.6:USB HID core driver >Yenta: ISA IRQ mask 0x0ed8, PCI irq 17 >Socket status: 30000006 >pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff >pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff >pcmcia: parent PCI bridge Memory window: 0x60000000 - 0x63ffffff >ieee1394: Initialized config rom entry `ip1394' >ohci1394: $Rev: 1313 $ Ben Collins >ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 17 >ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] >MMIO=[d0208000-d02087ff] Max Packet=[2048] >ieee1394: Host added: ID:BUS[0-00:1023] GUID[463f02005c594058] >eth1394: $Rev: 1312 $ Ben Collins >eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) >Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing >disabled >ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 5 (level, low) -> IRQ 5 >ACPI: PCI interrupt for device 0000:00:14.6 disabled >ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 5 (level, low) -> IRQ 5 >agpgart: Detected Ati IGP9100/M chipset >agpgart: AGP aperture is 32M @ 0xd2000000 >USB Universal Host Controller Interface driver v2.3 >ip_tables: (C) 2000-2002 Netfilter core team >ip_conntrack version 2.3 (7168 buckets, 57344 max) - 236 bytes per >conntrack >Installing knfsd (copyright (C) 1996 okir@monad.swb.de). >NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery >directory >NFSD: recovery directory /var/lib/nfs/v4recovery doesn't exist >NFSD: starting 90-second grace period >nfsd: last server has exited >nfsd: unexporting all filesystems >NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery >directory >NFSD: recovery directory /var/lib/nfs/v4recovery doesn't exist >NFSD: starting 90-second grace period > >Hope this helps. > >David > > >On Sun, 2005-10-30 at 10:33 -0500, Mark Hahn wrote: > > >>>The problem I reported on the linux-kernel list and later here. See >>> >>> >>you mentioned posting the full dmesg(s). in particular, >>are there differences in /proc/interrupts in working and >>non-working kernels? lspci -v might also be interesting. >> >> >> >>>laptop has a P4 Hyperthreaded chip (someone mentioned that there was an >>>ACPI problem related to hyperthreading). >>> >>> >>conceivable, but HT is hardly a new phenomenon. >> >> >> >> > >- >To unsubscribe from this list: send the line "unsubscribe linux-ide" in >the body of a message to majordomo@vger.kernel.org >More majordomo info at http://vger.kernel.org/majordomo-info.html > > > ___________________________________________________________ Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier anmelden: http://mail.yahoo.de