From: Albert Lee <albertcc@tw.ibm.com>
To: Jeff Garzik <jgarzik@pobox.com>
Cc: Doug Maxey <dwm@maxeymade.com>,
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>,
Mark Lord <mlord@pobox.com>,
Linux IDE <linux-ide@vger.kernel.org>
Subject: [PATCH/RFC 2/4] irq-pio: merge the ata_dataout_task workqueue with ata_pio_task workqueue
Date: Tue, 01 Nov 2005 19:24:49 +0800 [thread overview]
Message-ID: <43675081.6000700@tw.ibm.com> (raw)
In-Reply-To: <43674D9A.9010007@tw.ibm.com>
Patch 2/4:
merge the ata_dataout_task workqueue with ata_pio_task workqueue
Changes:
- remove ap->dataout_task from struct ata_port
- let ata_pio_task() handle the HSM_ST_FIRST state.
- rename ata_dataout_task() to ata_pio_first_block()
- replace the ata_dataout_task workqueue with ata_pio_task workqueue
For your review, thanks.
Albert
Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
========
--- id1/include/linux/libata.h 2005-11-01 17:39:14.000000000 +0800
+++ id2/include/linux/libata.h 2005-11-01 17:57:00.000000000 +0800
@@ -334,8 +334,6 @@ struct ata_port {
struct ata_host_stats stats;
struct ata_host_set *host_set;
- struct work_struct dataout_task;
-
struct work_struct pio_task;
unsigned int hsm_task_state;
unsigned long pio_task_timeout;
--- id1/drivers/scsi/libata-core.c 2005-11-01 18:45:16.000000000 +0800
+++ id2/drivers/scsi/libata-core.c 2005-11-01 18:45:35.000000000 +0800
@@ -2963,8 +2963,8 @@ static void atapi_send_cdb(struct ata_po
}
/**
- * ata_dataout_task - Write first data block to hardware
- * @_data: Port to which ATA/ATAPI device is attached.
+ * ata_pio_first_block - Write first data block to hardware
+ * @ap: Port to which ATA/ATAPI device is attached.
*
* When device has indicated its readiness to accept
* the data, this function sends out the CDB or
@@ -2977,9 +2977,8 @@ static void atapi_send_cdb(struct ata_po
* Kernel thread context (may sleep)
*/
-static void ata_dataout_task(void *_data)
+static void ata_pio_first_block(struct ata_port *ap)
{
- struct ata_port *ap = _data;
struct ata_queued_cmd *qc;
u8 status;
unsigned long flags;
@@ -3253,6 +3252,10 @@ fsm_start:
qc_completed = 0;
switch (ap->hsm_task_state) {
+ case HSM_ST_FIRST:
+ ata_pio_first_block(ap);
+ return;
+
case HSM_ST:
ata_pio_block(ap);
break;
@@ -3703,10 +3706,10 @@ int ata_qc_issue_prot(struct ata_queued_
if (qc->tf.flags & ATA_TFLAG_WRITE) {
/* PIO data out protocol */
ap->hsm_task_state = HSM_ST_FIRST;
- queue_work(ata_wq, &ap->dataout_task);
+ queue_work(ata_wq, &ap->pio_task);
/* always send first data block using
- * the ata_dataout_task() codepath.
+ * the ata_pio_task() codepath.
*/
} else {
/* PIO data in protocol */
@@ -3733,7 +3736,7 @@ int ata_qc_issue_prot(struct ata_queued_
/* send cdb by polling if no cdb interrupt */
if ((!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) ||
(qc->tf.flags & ATA_TFLAG_POLLING))
- queue_work(ata_wq, &ap->dataout_task);
+ queue_work(ata_wq, &ap->pio_task);
break;
case ATA_PROT_ATAPI_DMA:
@@ -3745,7 +3748,7 @@ int ata_qc_issue_prot(struct ata_queued_
/* send cdb by polling if no cdb interrupt */
if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR))
- queue_work(ata_wq, &ap->dataout_task);
+ queue_work(ata_wq, &ap->pio_task);
break;
default:
@@ -4325,7 +4328,6 @@ static void ata_host_init(struct ata_por
ap->active_tag = ATA_TAG_POISON;
ap->last_ctl = 0xFF;
- INIT_WORK(&ap->dataout_task, ata_dataout_task, ap);
INIT_WORK(&ap->pio_task, ata_pio_task, ap);
for (i = 0; i < ATA_MAX_DEVICES; i++)
next prev parent reply other threads:[~2005-11-01 11:24 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-11-01 11:12 [PATCH/RFC 0/4] libata: more irq driven pio follow-up patches Albert Lee
2005-11-01 11:19 ` [PATCH/RFC 1/4] irq-pio: misc fixes Albert Lee
2005-11-09 6:22 ` Jeff Garzik
2005-11-01 11:24 ` Albert Lee [this message]
2005-11-01 11:30 ` [PATCH/RFC 3/4] irq-pio: eliminate unnecessary queuing in ata_pio_first_block() Albert Lee
2005-11-01 11:33 ` [PATCH/RFC 4/4] irq-pio: add read/write multiple support Albert Lee
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=43675081.6000700@tw.ibm.com \
--to=albertcc@tw.ibm.com \
--cc=bzolnier@gmail.com \
--cc=dwm@maxeymade.com \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
--cc=mlord@pobox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).