VERSION ======= Linux version 2.6.14 (root@obelix) (gcc version 3.3.5 20050117 (prerelease) (SUSE Linux)) #3 SMP Mon Oct 31 23:28:27 CET 2005 dmesg ===== Bootdata ok (command line is root=/dev/sdb2 vga=0x31a selinux=0 splash=silent console=tty0 resume=/dev/sdb1 desktop elevator=as) Linux version 2.6.14 (root@obelix) (gcc version 3.3.5 20050117 (prerelease) (SUSE Linux)) #3 SMP Mon Oct 31 23:28:27 CET 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable) BIOS-e820: 000000003ffb0000 - 000000003ffbe000 (ACPI data) BIOS-e820: 000000003ffbe000 - 000000003fff0000 (ACPI NVS) BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000fafa0 ACPI: RSDT (v001 A M I OEMRSDT 0x02000503 MSFT 0x00000097) @ 0x000000003ffb0000 ACPI: FADT (v001 A M I OEMFACP 0x02000503 MSFT 0x00000097) @ 0x000000003ffb0200 ACPI: MADT (v001 A M I OEMAPIC 0x02000503 MSFT 0x00000097) @ 0x000000003ffb0390 ACPI: OEMB (v001 A M I AMI_OEM 0x02000503 MSFT 0x00000097) @ 0x000000003ffbe040 ACPI: MCFG (v001 A M I OEMMCFG 0x02000503 MSFT 0x00000097) @ 0x000000003ffb6cc0 ACPI: DSDT (v001 A0143 A0143006 0x00000006 INTL 0x02002026) @ 0x0000000000000000 On node 0 totalpages: 261967 DMA zone: 3999 pages, LIFO batch:1 Normal zone: 257968 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:1 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 15:4 APIC version 20 ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:bfb00000) Built 1 zonelists Kernel command line: root=/dev/sdb2 vga=0x31a selinux=0 splash=silent console=tty0 resume=/dev/sdb1 desktop elevator=as Initializing CPU#0 PID hash table entries: 4096 (order: 12, 131072 bytes) time.c: Using 3.579545 MHz PM timer. time.c: Detected 3412.276 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Memory: 1023404k/1048256k available (2342k kernel code, 24084k reserved, 903k data, 200k init) Calibrating delay using timer specific routine.. 6834.51 BogoMIPS (lpj=13669024) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 256 CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K using mwait in idle threads. CPU: Physical Processor ID: 0 CPU0: Thermal monitoring enabled (TM1) mtrr: v2.0 (20020519) tbxface-0109 [02] load_tables : ACPI Tables successfully acquired Parsing all Control Methods:............................................................................................................................................................................................... Table [DSDT](id 0005) - 727 Objects with 54 Devices 191 Methods 23 Regions ACPI Namespace successfully loaded at root ffffffff8048ddc0 evxfevnt-0091 [03] enable : Transition to ACPI mode successful Using local APIC timer interrupts. Detected 4.886 MHz APIC timer. softlockup thread 0 started up. Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 6824.70 BogoMIPS (lpj=13649401) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU1: Thermal monitoring enabled (TM1) Intel(R) Pentium(R) 4 CPU 3.40GHz stepping 03 APIC error on CPU1: 00(40) CPU 1: Syncing TSC to CPU 0. CPU 1: synchronized TSC with CPU 0 (last diff -145 cycles, maxerr 952 cycles) Brought up 2 CPUs softlockup thread 1 started up. time.c: Using PIT/TSC based timekeeping. testing NMI watchdog ... OK. checking if image is initramfs... it is NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 PCI: Using MMCONFIG at e0000000 ACPI: Subsystem revision 20050902 evgpeblk-0988 [06] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 evgpeblk-0996 [06] ev_create_gpe_block : Found 11 Wake, Enabled 0 Runtime GPEs in this block Completing Region/Field/Buffer/Package initialization:...................................................................................................................................................................... Initialized 22/23 Regions 26/26 Fields 41/41 Buffers 77/78 Packages (736 nodes) Executing all Device _STA and_INI methods:.......................................................... 58 Devices found containing: 58 _STA, 1 _INI methods ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:04:00.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 *14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 17 devices PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca) pnp: 00:07: ioport range 0x290-0x297 has been reserved pnp: 00:09: ioport range 0x3f6-0x3f6 has been reserved PCI: Bridge: 0000:00:01.0 IO window: e000-efff MEM window: d2f00000-d7ffffff PREFETCH window: d8000000-dfffffff PCI: Bridge: 0000:00:1c.0 IO window: d000-dfff MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.1 IO window: c000-cfff MEM window: d2e00000-d2efffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: 9000-bfff MEM window: d2d00000-d2dfffff PREFETCH window: 50000000-500fffff acpi_bus-0200 [01] bus_set_power : Device is not power manageable ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:01.0 to 64 acpi_bus-0200 [01] bus_set_power : Device is not power manageable ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1c.0 to 64 acpi_bus-0200 [01] bus_set_power : Device is not power manageable ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1c.1 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ audit: initializing netlink socket (disabled) audit(1130802329.628:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) NTFS driver 2.1.24 [Flags: R/W DEBUG]. Initializing Cryptographic API ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie03] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie02] Allocate Port Service[pcie03] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie02] Allocate Port Service[pcie03] vesafb: framebuffer at 0xd8000000, mapped to 0xffffc20010100000, using 5120k, total 131072k vesafb: mode is 1280x1024x16, linelength=2560, pages=1 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 vesafb: Mode is not VGA compatible Console: switching to colour frame buffer device 160x64 fb0: VESA VGA frame buffer device vga16fb: initializing vga16fb: mapped to 0xffff8100000a0000 fb1: VGA16 VGA frame buffer device Real Time Clock Driver v1.12 Non-volatile memory driver v1.2 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS0 at I/O 0x3f8 (irq = 0) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize loop: loaded (max 8 devices) mice: PS/2 mouse device common for all mice NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered TCP bic registered NET: Registered protocol family 1 input: AT Translated Set 2 keyboard on isa0060/serio0 Freeing unused kernel memory: 200k freed SCSI subsystem initialized libata version 1.12 loaded. sata_sil version 0.9 ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 22 (level, low) -> IRQ 217 ata1: SATA max UDMA/100 cmd 0xFFFFC20000006480 ctl 0xFFFFC2000000648A bmdma 0xFFFFC20000006400 irq 217 ata2: SATA max UDMA/100 cmd 0xFFFFC200000064C0 ctl 0xFFFFC200000064CA bmdma 0xFFFFC20000006408 irq 217 ata3: SATA max UDMA/100 cmd 0xFFFFC20000006680 ctl 0xFFFFC2000000668A bmdma 0xFFFFC20000006600 irq 217 ata4: SATA max UDMA/100 cmd 0xFFFFC200000066C0 ctl 0xFFFFC200000066CA bmdma 0xFFFFC20000006608 irq 217 logips2pp: Detected unknown logitech mouse model 113 input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1 ata1: no device found (phy stat 00000000) scsi0 : sata_sil ata2: no device found (phy stat 00000000) scsi1 : sata_sil ata3: no device found (phy stat 00000000) scsi2 : sata_sil ata4: no device found (phy stat 00000000) scsi3 : sata_sil ACPI: PCI Interrupt 0000:01:09.0[A] -> GSI 17 (level, low) -> IRQ 177 sym0: <895> rev 0x1 at pci 0000:01:09.0 irq 177 sym0: Tekram NVRAM, ID 7, Fast-40, LVD, parity checking sym0: SCSI BUS has been reset. scsi4 : sym-2.2.1 Vendor: SEAGATE Model: DAT 06240-XXX Rev: 8110 Type: Sequential-Access ANSI SCSI revision: 03 target4:0:14: Beginning Domain Validation target4:0:14: asynchronous. target4:0:14: wide asynchronous. target4:0:14: Domain Validation skipping write tests target4:0:14: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 31) target4:0:14: Ending Domain Validation ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 177 sk98lin: Network Device Driver v8.23.1.3 (C)Copyright 1999-2005 Marvell(R). ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:02:00.0 to 64 eth0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter PrefPort:A RlmtMode:Check Link State usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v2.3 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 225 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 225, io base 0x00007000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 233 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 233, io base 0x00007080 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 50 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 50, io base 0x00007400 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 169, io base 0x00007480 usb 1-1: new full speed USB device using uhci_hcd and address 2 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 1-2: new full speed USB device using uhci_hcd and address 3 drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0007 usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver ip_tables: (C) 2000-2002 Netfilter core team ahci version 1.01 acpi_bus-0200 [01] bus_set_power : Device is not power manageable ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 233 usb 2-1: new full speed USB device using uhci_hcd and address 2 hub 2-1:1.0: USB hub found hub 2-1:1.0: 4 ports detected PCI: Setting latency timer of device 0000:00:1f.2 to 64 ahci(0000:00:1f.2) AHCI 0001.0000 32 slots 4 ports 1.5 Gbps 0xf impl IDE mode ahci(0000:00:1f.2) flags: 64bit ncq pm led slum part ata5: SATA max UDMA/133 cmd 0xFFFFC20000014D00 ctl 0x0 bmdma 0x0 irq 233 ata6: SATA max UDMA/133 cmd 0xFFFFC20000014D80 ctl 0x0 bmdma 0x0 irq 233 ata7: SATA max UDMA/133 cmd 0xFFFFC20000014E00 ctl 0x0 bmdma 0x0 irq 233 ata8: SATA max UDMA/133 cmd 0xFFFFC20000014E80 ctl 0x0 bmdma 0x0 irq 233 ata5: dev 0 cfg 49:2f00 82:74eb 83:7fea 84:4023 85:74e9 86:3c02 87:4023 88:003f ata5: dev 0 ATA, max UDMA/100, 160836480 sectors: lba48 ata5: dev 0 configured for UDMA/100 scsi5 : ahci ata6: no device found (phy stat 00000000) scsi6 : ahci ata7: dev 0 cfg 49:2f00 82:74eb 83:7fea 84:4023 85:74e9 86:3c02 87:4023 88:003f ata7: dev 0 ATA, max UDMA/100, 321672960 sectors: lba48 ata7: dev 0 configured for UDMA/100 scsi7 : ahci ata8: no device found (phy stat 00000000) scsi8 : ahci Vendor: ATA Model: HDS722580VLSA80 Rev: V32O Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB) SCSI device sda: drive cache: write back SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 < sda5 sda6 > Attached scsi disk sda at scsi5, channel 0, id 0, lun 0 Vendor: ATA Model: HDS722516VLSA80 Rev: V34O Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdb: 321672960 512-byte hdwr sectors (164697 MB) SCSI device sdb: drive cache: write back SCSI device sdb: 321672960 512-byte hdwr sectors (164697 MB) SCSI device sdb: drive cache: write back sdb: sdb1 sdb2 Attached scsi disk sdb at scsi7, channel 0, id 0, lun 0 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ReiserFS: sdb2: found reiserfs format "3.6" with standard journal ReiserFS: sdb2: using ordered data mode ReiserFS: sdb2: journal params: device sdb2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sdb2: checking transaction log (sdb2) ReiserFS: sdb2: Using r5 hash to sort names Adding 1052216k swap on /dev/sdb1. Priority:42 extents:1 across:1052216k md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 3.39 device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com acpi_bus-0200 [01] bus_set_power : Device is not power manageable ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 225 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: irq 225, io mem 0xd2cff800 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected ieee1394: Initialized config rom entry `ip1394' usb 2-1: USB disconnect, address 2 ICH6: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 50 ICH6: chipset revision 4 ICH6: 100% native mode on irq 50 ide0: BM-DMA at 0x7800-0x7807, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x7808-0x780f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: WDC WD1600JB-00FUA0, ATA DISK drive usb 5-3: new high speed USB device using ehci_hcd and address 4 hub 5-3:1.0: USB hub found hub 5-3:1.0: 4 ports detected usb 1-1: USB disconnect, address 2 drivers/usb/class/usblp.c: usblp0: removed ide0 at 0x8080-0x8087,0x8002 on irq 50 hda: max request size: 1024KiB hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(100) hda: cache flushes supported hda: hda1 Probing IDE interface ide1... usb 1-1: new full speed USB device using uhci_hcd and address 4 APIC error on CPU1: 40(60) ohci1394: $Rev: 1313 $ Ben Collins ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 21 (level, low) -> IRQ 58 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[58] MMIO=[d2dfd800-d2dfdfff] Max Packet=[4096] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0007 usb 1-2: USB disconnect, address 3 usb 1-2: new full speed USB device using uhci_hcd and address 5 irq 50: nobody cared (try booting with the "irqpoll" option) Call Trace: {__report_bad_irq+48} {note_interrupt+497} {__do_IRQ+187} {do_IRQ+47} {ret_from_intr+0} handlers: [] (usb_hcd_irq+0x0/0x4a [usbcore]) [] (ide_intr+0x0/0x1fc [ide_core]) Disabling IRQ #50 ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d800001d6314] Attached scsi generic sg0 at scsi4, channel 0, id 14, lun 0, type 1 Attached scsi generic sg1 at scsi5, channel 0, id 0, lun 0, type 0 Attached scsi generic sg2 at scsi7, channel 0, id 0, lun 0, type 0 st: Version 20050830, fixed bufsize 32768, s/g segs 256 Attached scsi tape st0 at scsi4, channel 0, id 14, lun 0 st0: try direct i/o: yes (alignment 512 B), max page reachable by HBA 1048575 BIOS EDD facility v0.16 2004-Jun-25, 3 devices found hda: lost interrupt irq 50: nobody cared (try booting with the "irqpoll" option) Call Trace: {__report_bad_irq+48} {note_interrupt+497} {__do_IRQ+187} {:ehci_hcd:ehci_watchdog+0} {do_IRQ+47} {ret_from_intr+0} {_spin_unlock_irqrestore+5} {run_timer_softirq+366} {__do_softirq+102} {call_softirq+31} {do_softirq+50} {apic_timer_interrupt+98} {mwait_idle+86} {cpu_idle+79} {start_kernel+466} {_sinittext+531} handlers: [] (usb_hcd_irq+0x0/0x4a [usbcore]) [] (ide_intr+0x0/0x1fc [ide_core]) Disabling IRQ #50 NET: Registered protocol family 10 Disabled Privacy Extensions on device ffffffff803ecb00(lo) IPv6 over IPv4 tunneling driver ip6_tables: (C) 2000-2002 Netfilter core team Disabled Privacy Extensions on device ffff81003bdf5800(sit0) Netfilter messages via NETLINK v0.30. ip_conntrack version 2.3 (4094 buckets, 32752 max) - 304 bytes per conntrack CSLIP: code copyright 1989 Regents of the University of California ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded HiSax: Linux Driver for passive ISDN cards HiSax: Version 3.5 (module) HiSax: Layer1 Revision 2.46.2.5 HiSax: Layer2 Revision 2.30.2.4 HiSax: TeiMgr Revision 2.20.2.3 HiSax: Layer3 Revision 2.22.2.3 HiSax: LinkLayer Revision 2.59.2.4 HiSax: Total 1 card defined HiSax: Card 1 Protocol EDSS1 Id=contr0 (0) HiSax: AVM PCI driver Rev. 1.29.2.4 ACPI: PCI Interrupt 0000:01:0a.0[A] -> GSI 21 (level, low) -> IRQ 58 AVM PCI: stat 0x2020a AVM PCI: Class A Rev 2 HiSax: AVM Fritz!PCI config irq:58 base:0xBC00 AVM PCI: ISAC version (0): 2086/2186 V1.1 AVM Fritz PnP/PCI: IRQ 58 count 2 AVM PCI/PnP: reset AVM PCI/PnP: S1 0 AVM Fritz PnP/PCI: IRQ 58 count 7 HiSax: DSS1 Rev. 2.32.2.3 HiSax: 2 channels added HiSax: MAX_WAITING_CALLS added HiSax: debugging flags card 1 set to 4 ACPI: CPU0 (power states: C1[C1]) ACPI: Processor [CPU1] (supports 8 throttling states) ACPI: CPU1 (power states: C1[C1]) Parsing all Control Methods:.... Table [SSDT](id 0007) - 10 Objects with 0 Devices 4 Methods 0 Regions Parsing all Control Methods:.... Table [SSDT](id 0008) - 10 Objects with 0 Devices 4 Methods 0 Regions ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] lp0: using parport0 (interrupt-driven). lp0: console ready eth0: no IPv6 routers present usbcore: registered new driver usbserial drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic usbcore: registered new driver usbserial_generic drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0 hda: dma_timer_expiry: dma status == 0x24 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 hda: DMA interrupt recovery hda: lost interrupt irq 50: nobody cared (try booting with the "irqpoll" option) Call Trace: {__report_bad_irq+48} {note_interrupt+497} {__do_IRQ+187} {do_IRQ+47} {ret_from_intr+0} handlers: [] (usb_hcd_irq+0x0/0x4a [usbcore]) [] (ide_intr+0x0/0x1fc [ide_core]) Disabling IRQ #50 usb 5-3.4: new full speed USB device using ehci_hcd and address 5 Initializing USB Mass Storage driver... scsi9 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 5 usb-storage: waiting for device to settle before scanning usbcore: registered new driver usb-storage USB Mass Storage support registered. Vendor: Generic Model: Traveling Disk Rev: 1.11 Type: Direct-Access ANSI SCSI revision: 02 SCSI device sdc: 129024 512-byte hdwr sectors (66 MB) sdc: Write Protect is off sdc: Mode Sense: 03 00 00 00 sdc: assuming drive cache: write through SCSI device sdc: 129024 512-byte hdwr sectors (66 MB) sdc: Write Protect is off sdc: Mode Sense: 03 00 00 00 sdc: assuming drive cache: write through sdc: sdc1 Attached scsi removable disk sdc at scsi9, channel 0, id 0, lun 0 Attached scsi generic sg3 at scsi9, channel 0, id 0, lun 0, type 0 usb-storage: device scan complete hda: lost interrupt irq 50: nobody cared (try booting with the "irqpoll" option) Call Trace: {__report_bad_irq+48} {note_interrupt+497} {__do_IRQ+187} {do_IRQ+47} {ret_from_intr+0} {_spin_lock+3} {__d_lookup+271} {_atomic_dec_and_lock+34} {dput+44} {__link_path_walk+2020} {link_path_walk+86} {get_unused_fd+231} {path_lookup+453} {open_namei+155} {filp_open+80} {get_unused_fd+231} {do_sys_open+59} {system_call+126} handlers: [] (usb_hcd_irq+0x0/0x4a [usbcore]) [] (ide_intr+0x0/0x1fc [ide_core]) Disabling IRQ #50 sym0: SCSI parity error detected: SCR1=1 DBC=50000000 SBCL=0 sym0:0: ERROR (81:0) (8-0-0) (0/0/0) @ (scripta 38:4f1c8482). sym0: script cmd = e21c0004 sym0: regdump: da 00 00 00 47 00 00 02 00 08 00 00 80 00 0f 02 28 f1 16 3f 02 ff ff ff. sym0: SCSI BUS reset detected. sym0: SCSI BUS has been reset. hda: dma_timer_expiry: dma status == 0x24 hda: DMA interrupt recovery hda: lost interrupt irq 50: nobody cared (try booting with the "irqpoll" option) Call Trace: {__report_bad_irq+48} {note_interrupt+497} {__do_IRQ+187} {do_IRQ+47} {ret_from_intr+0} {mwait_idle+86} {:processor:acpi_processor_idle+307} {cpu_idle+79} {start_kernel+466} {_sinittext+531} handlers: [] (usb_hcd_irq+0x0/0x4a [usbcore]) [] (ide_intr+0x0/0x1fc [ide_core]) Disabling IRQ #50 CPU INFO ======== processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 4 model name : Intel(R) Pentium(R) 4 CPU 3.40GHz stepping : 3 cpu MHz : 3412.276 cache size : 2048 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 1 fpu : yes fpu_exception : yes cpuid level : 5 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall lm constant_tsc pni monitor ds_cpl est cid cx16 xtpr bogomips : 6834.51 clflush size : 64 cache_alignment : 128 address sizes : 36 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 15 model : 4 model name : Intel(R) Pentium(R) 4 CPU 3.40GHz stepping : 3 cpu MHz : 3412.276 cache size : 2048 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 1 fpu : yes fpu_exception : yes cpuid level : 5 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall lm constant_tsc pni monitor ds_cpl est cid cx16 xtpr bogomips : 6824.70 clflush size : 64 cache_alignment : 128 address sizes : 36 bits physical, 48 bits virtual power management: MODULES ======= ipt_TCPMSS 4096 1 - Live 0xffffffff8831b000 ipt_LOG 6912 7 - Live 0xffffffff88318000 ipt_limit 2560 7 - Live 0xffffffff882e3000 usb_storage 64192 0 - Live 0xffffffff88307000 floppy 65192 0 - Live 0xffffffff882f6000 usbserial 29680 0 - Live 0xffffffff882ed000 parport_pc 26728 1 - Live 0xffffffff882e5000 lp 11856 0 - Live 0xffffffff882df000 parport 34828 2 parport_pc,lp, Live 0xffffffff882d5000 thermal 20496 0 - Live 0xffffffff882ce000 fan 5640 0 - Live 0xffffffff882cb000 button 8480 0 - Live 0xffffffff882c7000 battery 12936 0 - Live 0xffffffff882c2000 ac 6408 0 - Live 0xffffffff882bf000 cpufreq_userspace 5056 2 - Live 0xffffffff882bc000 speedstep_centrino 5344 1 - Live 0xffffffff882b9000 processor 36832 2 thermal,speedstep_centrino, Live 0xffffffff882af000 hisax 427940 2 - Live 0xffffffff88245000 crc_ccitt 2432 1 hisax, Live 0xffffffff88243000 isdn 129120 9 hisax, Live 0xffffffff88222000 slhc 6528 1 isdn, Live 0xffffffff8821f000 ipt_state 2176 11 - Live 0xffffffff8821d000 ip6t_REJECT 4736 3 - Live 0xffffffff8821a000 ipt_REJECT 4992 3 - Live 0xffffffff88217000 iptable_mangle 2944 0 - Live 0xffffffff88215000 iptable_nat 7428 0 - Live 0xffffffff88212000 iptable_filter 3072 1 - Live 0xffffffff88210000 ip6table_mangle 2688 0 - Live 0xffffffff88164000 ip_nat_ftp 3584 0 - Live 0xffffffff8815e000 ip_nat 17948 2 iptable_nat,ip_nat_ftp, Live 0xffffffff8820a000 ip_conntrack_ftp 7248 1 ip_nat_ftp, Live 0xffffffff88207000 ip_conntrack 47136 5 ipt_state,iptable_nat,ip_nat_ftp,ip_nat,ip_conntrack_ftp, Live 0xffffffff881fa000 nfnetlink 5960 2 ip_nat,ip_conntrack, Live 0xffffffff881f7000 ip6table_filter 2944 1 - Live 0xffffffff88158000 ip6_tables 17936 3 ip6t_REJECT,ip6table_mangle,ip6table_filter, Live 0xffffffff881f1000 ipv6 250752 19 ip6t_REJECT, Live 0xffffffff881b2000 edd 10016 0 - Live 0xffffffff881ae000 evdev 10368 0 - Live 0xffffffff881aa000 joydev 9600 0 - Live 0xffffffff881a6000 st 37676 0 - Live 0xffffffff8819b000 sr_mod 15524 0 - Live 0xffffffff88196000 sg 35384 0 - Live 0xffffffff8818c000 ohci1394 30392 0 - Live 0xffffffff88183000 ieee1394 89336 1 ohci1394, Live 0xffffffff8816c000 nls_iso8859_1 5504 1 - Live 0xffffffff88169000 nls_cp437 7296 1 - Live 0xffffffff88166000 piix 11268 0 [permanent], Live 0xffffffff88160000 i2c_i801 8852 0 - Live 0xffffffff8815a000 ehci_hcd 30472 0 - Live 0xffffffff8814f000 i2c_core 19456 1 i2c_i801, Live 0xffffffff88149000 dm_mod 48600 0 - Live 0xffffffff8813c000 md_mod 55296 0 - Live 0xffffffff8812d000 reiserfs 233336 1 - Live 0xffffffff880f3000 ide_cd 37792 0 - Live 0xffffffff880e8000 cdrom 36008 2 sr_mod,ide_cd, Live 0xffffffff880de000 ide_disk 14720 0 - Live 0xffffffff880d9000 ide_core 130372 4 usb_storage,piix,ide_cd,ide_disk, Live 0xffffffff880b8000 ata_piix 8836 0 - Live 0xffffffff880b4000 ahci 10628 3 - Live 0xffffffff880b0000 ip_tables 19216 8 ipt_TCPMSS,ipt_LOG,ipt_limit,ipt_state,ipt_REJECT,iptable_mangle,iptable_nat,iptable_filter, Live 0xffffffff880aa000 usblp 12416 0 - Live 0xffffffff880a5000 uhci_hcd 30112 0 - Live 0xffffffff8809c000 usbcore 110752 6 usb_storage,usbserial,ehci_hcd,usblp,uhci_hcd, Live 0xffffffff8807f000 sk98lin 179172 1 - Live 0xffffffff88052000 sym53c8xx 74660 1 - Live 0xffffffff8803e000 scsi_transport_spi 21632 1 sym53c8xx, Live 0xffffffff88037000 sata_sil 8196 0 - Live 0xffffffff88033000 libata 42512 3 ata_piix,ahci,sata_sil, Live 0xffffffff88027000 sd_mod 15744 5 - Live 0xffffffff88022000 scsi_mod 133136 9 usb_storage,st,sr_mod,sg,ahci,sym53c8xx,scsi_transport_spi,libata,sd_mod, Live 0xffffffff88000000 IO PORTS ======== 0000-001f : dma1 0020-0021 : pic1 0040-0043 : timer0 0050-0053 : timer1 0060-006f : keyboard 0070-0077 : rtc 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 0290-0297 : pnp 00:07 0378-037a : parport0 037b-037f : parport0 03c0-03df : vesafb 03f6-03f6 : pnp 00:09 03f8-03ff : serial 0400-041f : 0000:00:1f.3 0400-0407 : i801-smbus 0800-0803 : PM1a_EVT_BLK 0804-0805 : PM1a_CNT_BLK 0808-080b : PM_TMR 0810-0815 : ACPI CPU throttle 0820-0820 : PM2_CNT_BLK 0828-082f : GPE0_BLK 0cf8-0cff : PCI conf1 7000-701f : 0000:00:1d.0 7000-701f : uhci_hcd 7080-709f : 0000:00:1d.1 7080-709f : uhci_hcd 7400-741f : 0000:00:1d.2 7400-741f : uhci_hcd 7480-749f : 0000:00:1d.3 7480-749f : uhci_hcd 7800-780f : 0000:00:1f.1 7800-7807 : ide0 7808-780f : ide1 7880-7883 : 0000:00:1f.1 7c00-7c07 : 0000:00:1f.1 8000-8003 : 0000:00:1f.1 8002-8002 : ide0 8080-8087 : 0000:00:1f.1 8080-8087 : ide0 8400-840f : 0000:00:1f.2 8400-840f : ahci 8480-8483 : 0000:00:1f.2 8480-8483 : ahci 8800-8807 : 0000:00:1f.2 8800-8807 : ahci 8880-8883 : 0000:00:1f.2 8880-8883 : ahci 8c00-8c07 : 0000:00:1f.2 8c00-8c07 : ahci 9000-bfff : PCI Bus #01 9c00-9c0f : 0000:01:04.0 a000-a003 : 0000:01:04.0 a080-a087 : 0000:01:04.0 a400-a403 : 0000:01:04.0 a480-a487 : 0000:01:04.0 a800-a80f : 0000:01:05.0 a800-a80f : sata_sil a880-a883 : 0000:01:05.0 a880-a883 : sata_sil ac00-ac07 : 0000:01:05.0 ac00-ac07 : sata_sil b000-b0ff : 0000:01:09.0 b000-b0ff : sym53c8xx b800-b803 : 0000:01:05.0 b800-b803 : sata_sil b880-b887 : 0000:01:05.0 b880-b887 : sata_sil bc00-bc1f : 0000:01:0a.0 bc00-bc1f : avm PCI c000-cfff : PCI Bus #02 c800-c8ff : 0000:02:00.0 c800-c8ff : sk98lin d000-dfff : PCI Bus #03 e000-efff : PCI Bus #04 IO MEM ====== 00000000-0009fbff : System RAM 0009fc00-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000cf000-000d37ff : Adapter ROM 000d3800-000d39ff : Adapter ROM 000f0000-000fffff : System ROM 00100000-3ffaffff : System RAM 00100000-0034980b : Kernel code 0034980c-0042b7d7 : Kernel data 3ffb0000-3ffbdfff : ACPI Tables 3ffbe000-3ffeffff : ACPI Non-volatile Storage 3fff0000-3fffffff : reserved 50000000-500fffff : PCI Bus #01 50000000-5007ffff : 0000:01:05.0 50080000-5009ffff : 0000:01:04.0 500a0000-500affff : 0000:01:09.0 d2cf4000-d2cf7fff : 0000:00:1b.0 d2cff800-d2cffbff : 0000:00:1d.7 d2cff800-d2cffbff : ehci_hcd d2cffc00-d2cfffff : 0000:00:1f.2 d2cffc00-d2cfffff : ahci d2d00000-d2dfffff : PCI Bus #01 d2da0000-d2daffff : 0000:01:00.0 d2db0000-d2dbffff : 0000:01:00.0 d2df8000-d2dfbfff : 0000:01:03.0 d2dfd800-d2dfdfff : 0000:01:03.0 d2dfd800-d2dfdfff : ohci1394 d2dfe000-d2dfefff : 0000:01:09.0 d2dfe000-d2dfefff : sym53c8xx d2dff400-d2dff7ff : 0000:01:05.0 d2dff400-d2dff7ff : sata_sil d2dff800-d2dff8ff : 0000:01:09.0 d2dff800-d2dff8ff : sym53c8xx d2dffc00-d2dffc1f : 0000:01:0a.0 d2e00000-d2efffff : PCI Bus #02 d2ec0000-d2edffff : 0000:02:00.0 d2efc000-d2efffff : 0000:02:00.0 d2efc000-d2efffff : sk98lin d2f00000-d7ffffff : PCI Bus #04 d2fe0000-d2ffffff : 0000:04:00.0 d3000000-d3ffffff : 0000:04:00.0 d4000000-d7ffffff : 0000:04:00.0 d8000000-dfffffff : PCI Bus #04 d8000000-dfffffff : 0000:04:00.0 d8000000-dfffffff : vesafb ffb00000-ffffffff : reserved SCSI ==== Attached devices: Host: scsi4 Channel: 00 Id: 14 Lun: 00 Vendor: SEAGATE Model: DAT 06240-XXX Rev: 8110 Type: Sequential-Access ANSI SCSI revision: 03 Host: scsi5 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: HDS722580VLSA80 Rev: V32O Type: Direct-Access ANSI SCSI revision: 05 Host: scsi7 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: HDS722516VLSA80 Rev: V34O Type: Direct-Access ANSI SCSI revision: 05 Host: scsi9 Channel: 00 Id: 00 Lun: 00 Vendor: Generic Model: Traveling Disk Rev: 1.11 Type: Direct-Access ANSI SCSI revision: 02 lspci ===== 0000:00:00.0 Host bridge: Intel Corporation 925X/XE Memory Controller Hub (rev 0e) Subsystem: Intel Corporation: Unknown device 2580 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- Reset- FastB2B- Capabilities: [88] #0d [0000] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+ Address: fee01004 Data: 40c1 Capabilities: [a0] #10 [0141] 0000:00:1b.0 Class 0403: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04) Subsystem: ASUSTeK Computer Inc.: Unknown device 813d Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- Reset- FastB2B- Capabilities: [40] #10 [0141] Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+ Address: fee01004 Data: 40c9 Capabilities: [90] #0d [0000] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 04) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Reset- FastB2B- Capabilities: [40] #10 [0141] Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+ Address: fee01004 Data: 40d1 Capabilities: [90] #0d [0000] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc.: Unknown device 80a6 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- Reset- FastB2B- Capabilities: [50] #0d [0000] 0000:00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 04) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR+ TAbort- SERR-