From: thomas schorpp <t.schorpp@gmx.de>
To: USB Storage list <usb-storage@lists.one-eyed-alien.net>
Cc: Timothy Thelin <Timothy.Thelin@wdc.com>,
James Bottomley <James.Bottomley@SteelEye.com>,
linux-ide@vger.kernel.org,
Linux SCSI list <linux-scsi@vger.kernel.org>,
Matthew Dharm <mdharm-usb@one-eyed-alien.net>,
Patrick Mansfield <patmans@us.ibm.com>
Subject: Re: [usb-storage] [Merging ATA passthru] on integrating SMART/ATA-Security in usb-storage driver
Date: Wed, 09 Nov 2005 10:45:59 +0100 [thread overview]
Message-ID: <4371C557.80807@gmx.de> (raw)
In-Reply-To: <4371BB82.3090208@gmx.de>
thomas schorpp wrote:
> Timothy Thelin wrote:
>
>>>On Mon, 7 Nov 2005, James Bottomley wrote:
>>>
>>
>>It was generated against Linus' git repo after
>>applying Alan's patch.
>>
>>With both patches applied I can now do passthru cdbs on the
>>cypress part without issue, and I still don't see any IO issues.
>>
>>Anyone out there have a better selection of hardware to test with?
>>
>
>
> first i need better software, the 2.6.14-git-11 snapshot wont boot, cause
> it tries to mount root without detecting partitions before :/
>
> did i miss some patch since this snapshot?
>
ok, applies against 2.6.14.0. device: cypress -A- bridge.
no change with smartctl:
tom1:/usr/src/sm5/debug# ./smartctl -a -r ioctl,2 -T verypermissive /dev/sda
smartctl version 5.34 [i686-pc-linux-gnu] Copyright (C) 2002-5 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
[inquiry: 12 00 00 00 24 00 ]
scsi_status=0x0, host_status=0x0, driver_status=0x0
info=0x0 duration=0 milliseconds
Incoming data, len=36:
00 00 00 00 00 1f 00 00 00 49 43 33 35 4c 30 33 30
10 41 56 56 4e 30 37 2d 30 20 20 20 20 20 20 20 20
20 00 30 00 30
status=0x0
Device: IC35L030 AVVN07-0 Version:
[mode sense: 1a 00 1c 00 40 00 ]
scsi_status=0x2, host_status=0x0, driver_status=0x8
info=0x1 duration=0 milliseconds
Incoming data, len=64:
00 00 00 00 00 1f 00 00 00 49 43 33 35 4c 30 33 30
10 41 56 56 4e 30 37 2d 30 20 20 20 20 20 20 20 20
20 00 30 00 30 00 00 00 00 00 00 00 00 00 00 00 00
30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> Sense buffer, len=18:
00 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00
10 00 00
status=2: sense_key=5 asc=24 ascq=0
[inquiry: 12 01 80 00 40 00 ]
scsi_status=0x0, host_status=0x0, driver_status=0x0
info=0x0 duration=4 milliseconds
Incoming data, len=64:
00 00 00 00 00 1f 00 00 00 49 43 33 35 4c 30 33 30
10 41 56 56 4e 30 37 2d 30 20 20 20 20 20 20 20 20
20 00 30 00 30 00 00 00 00 00 00 00 00 00 00 00 00
30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
status=0x0
Vital Product Data (VPD) bit ignored in INQUIRY
Device type: disk
[mode sense: 1a 00 19 00 40 00 ]
scsi_status=0x2, host_status=0x0, driver_status=0x8
info=0x1 duration=4 milliseconds
Incoming data, len=64:
00 00 00 00 00 e8 30 ef c7 80 35 23 c5 00 00 00 00
10 70 6a bd c5 a0 84 11 c0 00 01 10 00 00 02 20 00
20 18 5e 3f d0 20 af 02 c8 00 00 00 00 70 6a bd c5
30 a0 84 11 c0 00 01 10 00 00 02 20 00 18 be db c5
>>> Sense buffer, len=18:
00 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00
10 00 00
status=2: sense_key=5 asc=24 ascq=0
Local Time is: Wed Nov 9 10:34:46 2005 CET
[test unit ready: 00 00 00 00 00 00 ]
scsi_status=0x0, host_status=0x0, driver_status=0x0
info=0x0 duration=0 milliseconds
status=0x0
Device does not support SMART [unsupported field in scsi command]
[log sense: 4d 00 40 00 00 00 00 00 04 00 ]
scsi_status=0x2, host_status=0x0, driver_status=0x8
info=0x1 duration=0 milliseconds
Incoming data, len=4:
00 54 5a 69 66
>>> Sense buffer, len=18:
00 70 00 05 00 00 00 00 0a 00 00 00 00 20 00 00 00
10 00 00
status=2: sense_key=5 asc=20 ascq=0
Log Sense for supported pages failed [unsupported scsi opcode]
[request sense: 03 00 00 00 12 00 ]
scsi_status=0x0, host_status=0x0, driver_status=0x0
info=0x0 duration=4 milliseconds
Incoming data, len=18:
00 70 00 00 00 00 00 00 0a 00 00 00 00 00 00 00 00
10 00 00
status=0x0
[read defect list(10): 37 00 0c 00 00 00 00 00 04 00 ]
scsi_status=0x2, host_status=0x0, driver_status=0x8
info=0x1 duration=0 milliseconds
Incoming data, len=4:
00 70 00 00 00
>>> Sense buffer, len=18:
00 70 00 05 00 00 00 00 0a 00 00 00 00 20 00 00 00
10 00 00
status=2: sense_key=5 asc=20 ascq=0
Read defect list (10) Failed: unsupported scsi opcode
Error Counter logging not supported
[mode sense: 1a 00 0a 00 40 00 ]
scsi_status=0x2, host_status=0x0, driver_status=0x8
info=0x1 duration=0 milliseconds
Incoming data, len=64:
00 00 00 00 00 1f 00 00 00 49 43 33 35 4c 30 33 30
10 41 56 56 4e 30 37 2d 30 20 20 20 20 20 20 20 20
20 00 30 00 30 00 00 00 00 00 00 00 00 00 00 00 00
30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> Sense buffer, len=18:
00 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00
10 00 00
status=2: sense_key=5 asc=24 ascq=0
Device does not support Self Test logging
tom1:/usr/src/sm5/debug#
tom1:/usr/src/sm5/debug#
tom1:/usr/src/sm5/debug# ./smartctl -a -r ioctl,2 -T verypermissive /dev/sg0
smartctl version 5.34 [i686-pc-linux-gnu] Copyright (C) 2002-5 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
[inquiry: 12 00 00 00 24 00 ]
scsi_status=0x0, host_status=0x0, driver_status=0x0
info=0x0 duration=0 milliseconds
Incoming data, len=36:
00 00 00 00 00 1f 00 00 00 49 43 33 35 4c 30 33 30
10 41 56 56 4e 30 37 2d 30 20 20 20 20 20 20 20 20
20 00 30 00 30
status=0x0
Device: IC35L030 AVVN07-0 Version:
[mode sense: 1a 00 1c 00 40 00 ]
scsi_status=0x2, host_status=0x0, driver_status=0x8
info=0x1 duration=0 milliseconds
Incoming data, len=64:
00 00 00 00 00 1f 00 00 00 49 43 33 35 4c 30 33 30
10 41 56 56 4e 30 37 2d 30 20 20 20 20 20 20 20 20
20 00 30 00 30 11 00 00 00 06 00 00 00 00 00 00 00
30 00 00 00 00 11 00 00 00 07 00 00 00 00 00 00 00
>>> Sense buffer, len=18:
00 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00
10 00 00
status=2: sense_key=5 asc=24 ascq=0
[inquiry: 12 01 80 00 40 00 ]
scsi_status=0x0, host_status=0x0, driver_status=0x0
info=0x0 duration=4 milliseconds
Incoming data, len=64:
00 00 00 00 00 1f 00 00 00 49 43 33 35 4c 30 33 30
10 41 56 56 4e 30 37 2d 30 20 20 20 20 20 20 20 20
20 00 30 00 30 00 00 00 00 00 00 00 00 00 00 00 00
30 00 00 00 00 11 00 00 00 07 00 00 00 00 00 00 00
status=0x0
Vital Product Data (VPD) bit ignored in INQUIRY
Device type: disk
[mode sense: 1a 00 19 00 40 00 ]
scsi_status=0x2, host_status=0x0, driver_status=0x8
info=0x1 duration=0 milliseconds
Incoming data, len=64:
00 00 00 00 00 1f 00 00 00 49 43 33 35 4c 30 33 30
10 41 56 56 4e 30 37 2d 30 20 20 20 20 20 20 20 20
20 00 30 00 30 00 00 00 00 00 00 00 00 00 00 00 00
30 00 00 00 00 11 00 00 00 07 00 00 00 00 00 00 00
>>> Sense buffer, len=18:
00 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00
10 00 00
status=2: sense_key=5 asc=24 ascq=0
Local Time is: Wed Nov 9 10:35:47 2005 CET
[test unit ready: 00 00 00 00 00 00 ]
scsi_status=0x0, host_status=0x0, driver_status=0x0
info=0x0 duration=0 milliseconds
status=0x0
Device does not support SMART [unsupported field in scsi command]
[log sense: 4d 00 40 00 00 00 00 00 04 00 ]
scsi_status=0x2, host_status=0x0, driver_status=0x8
info=0x1 duration=0 milliseconds
Incoming data, len=4:
00 00 00 00 00
>>> Sense buffer, len=18:
00 70 00 05 00 00 00 00 0a 00 00 00 00 20 00 00 00
10 00 00
status=2: sense_key=5 asc=20 ascq=0
Log Sense for supported pages failed [unsupported scsi opcode]
[request sense: 03 00 00 00 12 00 ]
scsi_status=0x0, host_status=0x0, driver_status=0x0
info=0x0 duration=0 milliseconds
Incoming data, len=18:
00 70 00 00 00 00 00 00 0a 00 00 00 00 00 00 00 00
10 00 00
status=0x0
[read defect list(10): 37 00 0c 00 00 00 00 00 04 00 ]
scsi_status=0x2, host_status=0x0, driver_status=0x8
info=0x1 duration=0 milliseconds
Incoming data, len=4:
00 70 00 00 00
>>> Sense buffer, len=18:
00 70 00 05 00 00 00 00 0a 00 00 00 00 20 00 00 00
10 00 00
status=2: sense_key=5 asc=20 ascq=0
Read defect list (10) Failed: unsupported scsi opcode
Error Counter logging not supported
[mode sense: 1a 00 0a 00 40 00 ]
scsi_status=0x2, host_status=0x0, driver_status=0x8
info=0x1 duration=0 milliseconds
Incoming data, len=64:
00 70 00 00 00 00 00 00 0a 00 00 00 00 00 00 00 00
10 00 00 56 4e 30 37 2d 30 20 20 20 20 20 20 20 20
20 00 30 00 30 00 00 00 00 00 00 00 00 00 00 00 00
30 00 00 00 00 11 00 00 00 07 00 00 00 00 00 00 00
>>> Sense buffer, len=18:
00 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00
10 00 00
status=2: sense_key=5 asc=24 ascq=0
Device does not support Self Test logging
tom1:/usr/src/sm5/debug#
no change with sdparm:
tom1:/usr/src/sm5/debug# sdparm -avl /dev/sda
/dev/sda: IC35L030 AVVN07-0
Read write error recovery [PS=0] mode page:
AWRE 0 [cha: n, def: 0, sav: 0] Automatic write reallocation enabled
ARRE 0 [cha: n, def: 0, sav: 0] Automatic read reallocation enabled
TB 0 [cha: n, def: 0, sav: 0] Transfer block
RC 0 [cha: n, def: 0, sav: 0] Read continuous
EER 0 [cha: n, def: 0, sav: 0] Enable early recover
PER 0 [cha: n, def: 0, sav: 0] Post error
DTE 0 [cha: n, def: 0, sav: 0] Data terminate on error
DCR 0 [cha: n, def: 0, sav: 0] Disable correction
RRC 0 [cha: n, def: 0, sav: 0] Read retry count
WRC 0 [cha: n, def: 0, sav: 0] Write retry count
RTL 0 [cha: n, def: 0, sav: 0] Recovery time limit (ms)
>> Format (SBC) mode page not supported
>> Rigid disk (SBC) mode page not supported
>> Verify error recovery (SBC) mode page not supported
Caching (SBC) [PS=0] mode page:
IC 0 [cha: n, def: 0, sav: 0] Initiator control
ABPF 0 [cha: n, def: 0, sav: 0] Abort pre-fetch
CAP 0 [cha: n, def: 0, sav: 0] Caching analysis permitted
DISC 0 [cha: n, def: 0, sav: 0] Discontinuity
SIZE 0 [cha: n, def: 0, sav: 0] Size (1->CSS valid, 0->NCS valid)
WCE 0 [cha: n, def: 0, sav: 0] Write cache enable
MF 0 [cha: n, def: 0, sav: 0] Multiplication factor
RCD 0 [cha: n, def: 0, sav: 0] Read cache disable
DRRP 0 [cha: n, def: 0, sav: 0] Demand read retension priority
WRP 0 [cha: n, def: 0, sav: 0] Write retension priority
DPTL 0 [cha: n, def: 0, sav: 0] Disable pre-fetch transfer length
MIPF 0 [cha: n, def: 0, sav: 0] Minimum pre-fetch
MAPF 0 [cha: n, def: 0, sav: 0] Maximum pre-fetch
MAPFC 0 [cha: n, def: 0, sav: 0] Maximum pre-fetch ceiling
>> skipping rest as field position exceeds mode page length=12
>> Control mode page not supported
>> XOR control (SBC) mode page not supported
>> Protocol specific logical unit mode page not supported
>> Protocol specific port mode page not supported
>> Power condition mode page not supported
>> Informational exceptions control mode page not supported
>> Background control (SBC) mode subpage not supported
tom1:/usr/src/sm5/debug#
tom1:/usr/src/sm5/debug#
tom1:/usr/src/sm5/debug#
tom1:/usr/src/sm5/debug# sdparm -avl /dev/sg0
/dev/sg0: IC35L030 AVVN07-0
Read write error recovery [PS=0] mode page:
AWRE 0 [cha: n, def: 0, sav: 0] Automatic write reallocation enabled
ARRE 0 [cha: n, def: 0, sav: 0] Automatic read reallocation enabled
TB 0 [cha: n, def: 0, sav: 0] Transfer block
RC 0 [cha: n, def: 0, sav: 0] Read continuous
EER 0 [cha: n, def: 0, sav: 0] Enable early recover
PER 0 [cha: n, def: 0, sav: 0] Post error
DTE 0 [cha: n, def: 0, sav: 0] Data terminate on error
DCR 0 [cha: n, def: 0, sav: 0] Disable correction
RRC 0 [cha: n, def: 0, sav: 0] Read retry count
WRC 0 [cha: n, def: 0, sav: 0] Write retry count
RTL 0 [cha: n, def: 0, sav: 0] Recovery time limit (ms)
>> Format (SBC) mode page not supported
>> Rigid disk (SBC) mode page not supported
>> Verify error recovery (SBC) mode page not supported
Caching (SBC) [PS=0] mode page:
IC 0 [cha: n, def: 0, sav: 0] Initiator control
ABPF 0 [cha: n, def: 0, sav: 0] Abort pre-fetch
CAP 0 [cha: n, def: 0, sav: 0] Caching analysis permitted
DISC 0 [cha: n, def: 0, sav: 0] Discontinuity
SIZE 0 [cha: n, def: 0, sav: 0] Size (1->CSS valid, 0->NCS valid)
WCE 0 [cha: n, def: 0, sav: 0] Write cache enable
MF 0 [cha: n, def: 0, sav: 0] Multiplication factor
RCD 0 [cha: n, def: 0, sav: 0] Read cache disable
DRRP 0 [cha: n, def: 0, sav: 0] Demand read retension priority
WRP 0 [cha: n, def: 0, sav: 0] Write retension priority
DPTL 0 [cha: n, def: 0, sav: 0] Disable pre-fetch transfer length
MIPF 0 [cha: n, def: 0, sav: 0] Minimum pre-fetch
MAPF 0 [cha: n, def: 0, sav: 0] Maximum pre-fetch
MAPFC 0 [cha: n, def: 0, sav: 0] Maximum pre-fetch ceiling
>> skipping rest as field position exceeds mode page length=12
>> Control mode page not supported
>> XOR control (SBC) mode page not supported
>> Protocol specific logical unit mode page not supported
>> Protocol specific port mode page not supported
>> Power condition mode page not supported
>> Informational exceptions control mode page not supported
>> Background control (SBC) mode subpage not supported
tom1:/usr/src/sm5/debug#
tom1:/usr/src/sm5/debug#
tom1:/usr/src/sm5/debug#
tom1:/usr/src/sm5/debug# sdparm -avl6 /dev/sg0
/dev/sg0: IC35L030 AVVN07-0
Read write error recovery [PS=0] mode page:
AWRE 0 [cha: n, def: 0, sav: 0] Automatic write reallocation enabled
ARRE 0 [cha: n, def: 0, sav: 0] Automatic read reallocation enabled
TB 0 [cha: n, def: 0, sav: 0] Transfer block
RC 0 [cha: n, def: 0, sav: 0] Read continuous
EER 0 [cha: n, def: 0, sav: 0] Enable early recover
PER 0 [cha: n, def: 0, sav: 0] Post error
DTE 0 [cha: n, def: 0, sav: 0] Data terminate on error
DCR 0 [cha: n, def: 0, sav: 0] Disable correction
RRC 0 [cha: n, def: 0, sav: 0] Read retry count
WRC 0 [cha: n, def: 0, sav: 0] Write retry count
RTL 0 [cha: n, def: 0, sav: 0] Recovery time limit (ms)
>> Format (SBC) mode page not supported
>> Rigid disk (SBC) mode page not supported
>> Verify error recovery (SBC) mode page not supported
Caching (SBC) [PS=0] mode page:
IC 0 [cha: n, def: 0, sav: 0] Initiator control
ABPF 0 [cha: n, def: 0, sav: 0] Abort pre-fetch
CAP 0 [cha: n, def: 0, sav: 0] Caching analysis permitted
DISC 0 [cha: n, def: 0, sav: 0] Discontinuity
SIZE 0 [cha: n, def: 0, sav: 0] Size (1->CSS valid, 0->NCS valid)
WCE 0 [cha: n, def: 0, sav: 0] Write cache enable
MF 0 [cha: n, def: 0, sav: 0] Multiplication factor
RCD 0 [cha: n, def: 0, sav: 0] Read cache disable
DRRP 0 [cha: n, def: 0, sav: 0] Demand read retension priority
WRP 0 [cha: n, def: 0, sav: 0] Write retension priority
DPTL 0 [cha: n, def: 0, sav: 0] Disable pre-fetch transfer length
MIPF 0 [cha: n, def: 0, sav: 0] Minimum pre-fetch
MAPF 0 [cha: n, def: 0, sav: 0] Maximum pre-fetch
MAPFC 0 [cha: n, def: 0, sav: 0] Maximum pre-fetch ceiling
>> skipping rest as field position exceeds mode page length=12
>> Control mode page not supported
>> XOR control (SBC) mode page not supported
>> Protocol specific logical unit mode page not supported
>> Protocol specific port mode page not supported
>> Power condition mode page not supported
>> Informational exceptions control mode page not supported
>> Background control (SBC) mode subpage not supported
tom1:/usr/src/sm5/debug#
next prev parent reply other threads:[~2005-11-09 9:45 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-11-08 19:50 [usb-storage] [Merging ATA passthru] on integrating SMART/ATA-Security in usb-storage driver Timothy Thelin
2005-11-09 9:04 ` thomas schorpp
2005-11-09 9:45 ` thomas schorpp [this message]
2005-11-09 10:05 ` thomas schorpp
2005-11-09 13:21 ` Mark Lord
2005-11-09 14:05 ` thomas schorpp
[not found] ` <4372172A.50003@gmx.de>
[not found] ` <43721C3C.1010103@pobox.com>
[not found] ` <1131553363.3271.1.camel@mulgrave>
2005-11-10 6:19 ` [DOC PATCH] T10/04-262r8 thomas schorpp
2005-11-10 7:44 ` Jeff Garzik
2005-11-10 14:27 ` Mark Lord
2005-11-10 15:05 ` (SAT) libata + hdparm/smartctl thomas schorpp
2005-11-20 7:10 ` Douglas Gilbert
2005-11-10 15:58 ` [DOC PATCH] T10/04-262r8 James Bottomley
-- strict thread matches above, loose matches on Subject: below --
2005-11-07 20:18 [usb-storage] [Merging ATA passthru] on integrating SMART/ATA-Security in usb-storage driver Timothy Thelin
2005-11-07 17:51 Timothy Thelin
2005-11-04 18:30 Timothy Thelin
2005-11-04 18:58 ` James Bottomley
2005-11-04 20:30 ` Matthew Dharm
2005-11-04 20:49 ` James Bottomley
2005-11-05 23:55 ` Matthew Dharm
2005-11-06 0:49 ` James Bottomley
2005-11-06 3:38 ` thomas schorpp
2005-11-06 21:58 ` Matthew Dharm
2005-11-06 22:28 ` thomas schorpp
2005-11-06 23:52 ` Patrick Mansfield
2005-11-07 16:59 ` Matthew Dharm
2005-11-07 17:05 ` Matthew Dharm
2005-11-07 17:24 ` Patrick Mansfield
2005-11-07 17:46 ` Alan Stern
2005-11-07 18:06 ` thomas schorpp
2005-11-07 19:33 ` Alan Stern
2005-11-07 20:07 ` thomas schorpp
2005-11-07 17:53 ` Christoph Hellwig
2005-11-07 17:54 ` thomas schorpp
2005-11-07 18:57 ` Patrick Mansfield
2005-11-07 19:53 ` Alan Stern
2005-11-07 20:47 ` Patrick Mansfield
2005-11-07 20:59 ` Alan Stern
2005-11-07 22:05 ` James Bottomley
2005-11-08 17:09 ` Alan Stern
2005-11-08 23:05 ` Mike Anderson
2005-11-09 15:35 ` Alan Stern
2005-11-06 23:15 ` James Bottomley
2005-11-07 18:14 ` Patrick Mansfield
2005-11-04 23:56 ` Andries Brouwer
2005-11-04 23:46 ` Pete Zaitcev
2005-11-05 16:20 ` thomas schorpp
2005-11-02 22:18 Timothy Thelin
2005-11-02 23:22 ` thomas schorpp
2005-11-02 23:45 ` Matthew Dharm
2005-11-04 4:08 ` James Bottomley
2005-11-04 17:28 ` Matthew Dharm
2005-11-04 18:33 ` James Bottomley
2005-11-04 20:30 ` Matthew Dharm
2005-11-04 20:53 ` James Bottomley
2005-11-02 20:33 Timothy Thelin
2005-11-02 21:55 ` thomas schorpp
2005-11-02 14:08 thomas schorpp
2005-11-02 16:05 ` [usb-storage] " Alan Stern
2005-11-02 19:12 ` thomas schorpp
2005-11-02 19:26 ` Alan Stern
2005-11-02 20:41 ` thomas schorpp
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4371C557.80807@gmx.de \
--to=t.schorpp@gmx.de \
--cc=James.Bottomley@SteelEye.com \
--cc=Timothy.Thelin@wdc.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=mdharm-usb@one-eyed-alien.net \
--cc=patmans@us.ibm.com \
--cc=usb-storage@lists.one-eyed-alien.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).