From: Richard Knutsson <ricknu-0@student.ltu.se>
To: benh@kernel.crashing.org, jgarzik@pobox.com
Cc: linux-ide@vger.kernel.org
Subject: [PATCH 2.6.15-rc2-mm1] scsi: fix compiler-warning for sata_svw.c
Date: Sun, 27 Nov 2005 00:35:33 +0100 [thread overview]
Message-ID: <4388F145.3060308@student.ltu.se> (raw)
From: Richard Knutsson <ricknu-0@student.ltu.se>
Fix compiler-warning "... makes pointer from integer without a cast".
Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se>
---
sata_svw.c | 65 ++++++++++++++++++++++++++++++++-----------------------------
1 files changed, 35 insertions(+), 30 deletions(-)
--- a/drivers/scsi/sata_svw.c 2005-11-26 21:41:35.000000000 +0100
+++ b/drivers/scsi/sata_svw.c 2005-11-26 23:46:32.000000000 +0100
@@ -110,26 +110,31 @@ static void k2_sata_tf_load(struct ata_p
unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
if (tf->ctl != ap->last_ctl) {
- writeb(tf->ctl, ioaddr->ctl_addr);
+ writeb(tf->ctl, (void *) ioaddr->ctl_addr);
ap->last_ctl = tf->ctl;
ata_wait_idle(ap);
}
if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
- writew(tf->feature | (((u16)tf->hob_feature) << 8), ioaddr->feature_addr);
- writew(tf->nsect | (((u16)tf->hob_nsect) << 8), ioaddr->nsect_addr);
- writew(tf->lbal | (((u16)tf->hob_lbal) << 8), ioaddr->lbal_addr);
- writew(tf->lbam | (((u16)tf->hob_lbam) << 8), ioaddr->lbam_addr);
- writew(tf->lbah | (((u16)tf->hob_lbah) << 8), ioaddr->lbah_addr);
+ writew(tf->feature | (((u16)tf->hob_feature) << 8),
+ (void *) ioaddr->feature_addr);
+ writew(tf->nsect | (((u16)tf->hob_nsect) << 8),
+ (void *) ioaddr->nsect_addr);
+ writew(tf->lbal | (((u16)tf->hob_lbal) << 8),
+ (void *) ioaddr->lbal_addr);
+ writew(tf->lbam | (((u16)tf->hob_lbam) << 8),
+ (void *) ioaddr->lbam_addr);
+ writew(tf->lbah | (((u16)tf->hob_lbah) << 8),
+ (void *) ioaddr->lbah_addr);
} else if (is_addr) {
- writew(tf->feature, ioaddr->feature_addr);
- writew(tf->nsect, ioaddr->nsect_addr);
- writew(tf->lbal, ioaddr->lbal_addr);
- writew(tf->lbam, ioaddr->lbam_addr);
- writew(tf->lbah, ioaddr->lbah_addr);
+ writew(tf->feature, (void *) ioaddr->feature_addr);
+ writew(tf->nsect, (void *) ioaddr->nsect_addr);
+ writew(tf->lbal, (void *) ioaddr->lbal_addr);
+ writew(tf->lbam, (void *) ioaddr->lbam_addr);
+ writew(tf->lbah, (void *) ioaddr->lbah_addr);
}
if (tf->flags & ATA_TFLAG_DEVICE)
- writeb(tf->device, ioaddr->device_addr);
+ writeb(tf->device, (void *) ioaddr->device_addr);
ata_wait_idle(ap);
}
@@ -140,26 +145,26 @@ static void k2_sata_tf_read(struct ata_p
struct ata_ioports *ioaddr = &ap->ioaddr;
u16 nsect, lbal, lbam, lbah, feature;
- tf->command = k2_stat_check_status(ap);
- tf->device = readw(ioaddr->device_addr);
- feature = readw(ioaddr->error_addr);
- nsect = readw(ioaddr->nsect_addr);
- lbal = readw(ioaddr->lbal_addr);
- lbam = readw(ioaddr->lbam_addr);
- lbah = readw(ioaddr->lbah_addr);
-
- tf->feature = feature;
- tf->nsect = nsect;
- tf->lbal = lbal;
- tf->lbam = lbam;
- tf->lbah = lbah;
+ tf->command = k2_stat_check_status(ap);
+ tf->device = readw((void *) ioaddr->device_addr);
+ feature = readw((void *) ioaddr->error_addr);
+ nsect = readw((void *) ioaddr->nsect_addr);
+ lbal = readw((void *) ioaddr->lbal_addr);
+ lbam = readw((void *) ioaddr->lbam_addr);
+ lbah = readw((void *) ioaddr->lbah_addr);
+
+ tf->feature = feature;
+ tf->nsect = nsect;
+ tf->lbal = lbal;
+ tf->lbam = lbam;
+ tf->lbah = lbah;
if (tf->flags & ATA_TFLAG_LBA48) {
- tf->hob_feature = feature >> 8;
- tf->hob_nsect = nsect >> 8;
- tf->hob_lbal = lbal >> 8;
- tf->hob_lbam = lbam >> 8;
- tf->hob_lbah = lbah >> 8;
+ tf->hob_feature = feature >> 8;
+ tf->hob_nsect = nsect >> 8;
+ tf->hob_lbal = lbal >> 8;
+ tf->hob_lbam = lbam >> 8;
+ tf->hob_lbah = lbah >> 8;
}
}
next reply other threads:[~2005-11-26 23:30 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-11-26 23:35 Richard Knutsson [this message]
2005-11-27 0:55 ` [PATCH 2.6.15-rc2-mm1] scsi: fix compiler-warning for sata_svw.c Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4388F145.3060308@student.ltu.se \
--to=ricknu-0@student.ltu.se \
--cc=benh@kernel.crashing.org \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox