From: "Jean-François Stenuit" <jfs@keytradebank.com>
To: Linux-ide <linux-ide@vger.kernel.org>
Cc: Tejun Heo <htejun@gmail.com>, "0602@eq.cz" <0602@eq.cz>
Subject: Re: totally random "VFS: Cannot open root device"
Date: Thu, 01 Dec 2005 12:20:29 +0100 [thread overview]
Message-ID: <438EDC7D.2020704@keytradebank.com> (raw)
In-Reply-To: <438D6B73.2060902@keytradebank.com>
[-- Attachment #1: Type: text/plain, Size: 25611 bytes --]
Jean-François Stenuit wrote:
> A failed boot shows "ata1: SATA port has no device". I'll try to
> set-up a serial console to log the boot messages.
As promised, here is the complete bootlog of a failed, then a
successfull boot :
GNU GRUB version 0.95 (622K lower / 1046976K upper memory)
+-------------------------------------------------------------------------+||||||||||||||||||||||||+-------------------------------------------------------------------------+
Use the ^ and v keys to select which entry is highlighted.
Press enter to boot the selected OS, 'e' to edit the
commands before booting, or 'c' for a command-line. Debian GNU/Linux, kernel 2.6.15-rc3-dl140-10 Debian GNU/Linux, kernel 2.6.15-rc3-dl140-10 (recovery mode) Debian GNU/Linux, kernel 2.6.15-rc3-dl140-9 Debian GNU/Linux, kernel 2.6.15-rc3-dl140-9 (recovery mode) The highlighted entry will be booted automatically in 5 seconds. The highlighted entry will be booted automatically in 4 seconds. The highlighted entry will be booted automatically in 3 seconds. The highlighted entry will be booted automatically in 2 seconds. The highlighted entry will be booted automatically in 1 seconds. Booting 'Debian GNU/Linux, kernel 2.6.15-rc3-dl140-10 '
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinuz-2.6.15-rc3-dl140-10 root=/dev/sda1 ro console=ttyS0,9600n8
[Linux-bzImage, setup=0x1c00, size=0x1a817b]
savedefault
boot
Linux version 2.6.15-rc3-dl140-10 (jfs@dl140) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #1 SMP Thu Dec 1 11:44:28 CET 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009b800 (usable)
BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ca000 - 00000000000cc000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ff70000 (usable)
BIOS-e820: 000000003ff70000 - 000000003ff7a000 (ACPI data)
BIOS-e820: 000000003ff7a000 - 000000003ff80000 (ACPI NVS)
BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f6790
DMI present.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:4 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xfec84000] gsi_base[24])
IOAPIC[1]: apic_id 3, version 32, address 0xfec84000, GSI 24-47
ACPI: IOAPIC (id[0x04] address[0xfec84400] gsi_base[48])
IOAPIC[2]: apic_id 4, version 32, address 0xfec84400, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Enabling APIC mode: Flat. Using 3 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
Built 1 zonelists
Kernel command line: root=/dev/sda1 ro console=ttyS0,9600n8
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 2800.863 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1034136k/1048000k available (2098k kernel code, 12972k reserved, 1222k data, 204k init, 130496k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 5608.53 BogoMIPS (lpj=11217073)
Mount-cache hash table entries: 512
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel(R) Xeon(TM) CPU 2.80GHz stepping 01
Booting processor 1/1 eip 2000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5600.62 BogoMIPS (lpj=11201255)
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU1: Intel(R) Xeon(TM) CPU 2.80GHz stepping 01
Total of 2 processors activated (11209.16 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd83a, last bus=7
PCI: Using MMCONFIG
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 1180-11bf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
PCI: PXH quirk detected, disabling MSI for SHPC device
PCI: PXH quirk detected, disabling MSI for SHPC device
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 *11 14 15)
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
PCI: Bridge: 0000:00:02.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:04.0
IO window: disabled.
MEM window: dd100000-dd1fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:05.0
IO window: disabled.
MEM window: dd200000-dd2fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:04:00.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:04:00.2
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:06.0
IO window: disabled.
MEM window: dd300000-dd3fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: 2000-2fff
MEM window: dd400000-deffffff
PREFETCH window: 50000000-500fffff
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16
Simple Boot Flag at 0x3b set to 0x1
highmem bounce pool size: 64 pages
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Processor [CPU1] (supports 8 throttling states)
Real Time Clock Driver v1.12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
Intel(R) PRO/1000 Network Driver - version 6.1.16-k2-NAPI
Copyright (c) 1999-2005 Intel Corporation.
Ethernet Channel Bonding Driver: v2.6.5 (November 4, 2005)
bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.
tg3.c:v3.43 (Oct 24, 2005)
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
eth0: Tigon3 [partno(BCM95721) rev 4101 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:14:c2:54:b4:b6
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[76180000]
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
eth1: Tigon3 [partno(BCM95721) rev 4101 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:14:c2:54:b4:b7
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
eth1: dma_rwctrl[76180000]
Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com)
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 17
ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x1470 irq 14
ata1: SATA port has no device.
scsi0 : ata_piix
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1478 irq 15
ata2: SATA port has no device.
scsi1 : ata_piix
mice: PS/2 mouse device common for all mice
Mirror/redirect action on
netem: version 1.1
u32 classifier
Perfomance counters on
input device check on
Actions configured
NET: Registered protocol family 2
input: AT Translated Set 2 keyboard as /class/input/input0
IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
ip_conntrack version 2.4 (8187 buckets, 65496 max) - 212 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
logips2pp: Detected unknown logitech mouse model 1
input: PS/2 Logitech Mouse as /class/input/input1
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http://snowman.net/projects/ipt_recent/
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
Starting balanced_irq
Using IPI Shortcut mode
VFS: Cannot open root device "sda1" or unknown-block(0,0)
Please append a correct "root=" boot option
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
GNU GRUB version 0.95 (622K lower / 1046976K upper memory)
+-------------------------------------------------------------------------+||||||||||||||||||||||||+-------------------------------------------------------------------------+
Use the ^ and v keys to select which entry is highlighted.
Press enter to boot the selected OS, 'e' to edit the
commands before booting, or 'c' for a command-line. Debian GNU/Linux, kernel 2.6.15-rc3-dl140-10 Debian GNU/Linux, kernel 2.6.15-rc3-dl140-10 (recovery mode) Debian GNU/Linux, kernel 2.6.15-rc3-dl140-9 Debian GNU/Linux, kernel 2.6.15-rc3-dl140-9 (recovery mode) The highlighted entry will be booted automatically in 5 seconds. The highlighted entry will be booted automatically in 4 seconds. The highlighted entry will be booted automatically in 3 seconds. The highlighted entry will be booted automatically in 2 seconds. The highlighted entry will be booted automatically in 1 seconds. Booting 'Debian GNU/Linux, kernel 2.6.15-rc3-dl140-10 '
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinuz-2.6.15-rc3-dl140-10 root=/dev/sda1 ro console=ttyS0,9600n8
[Linux-bzImage, setup=0x1c00, size=0x1a817b]
savedefault
boot
Linux version 2.6.15-rc3-dl140-10 (jfs@dl140) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #1 SMP Thu Dec 1 11:44:28 CET 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009b800 (usable)
BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ca000 - 00000000000cc000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ff70000 (usable)
BIOS-e820: 000000003ff70000 - 000000003ff7a000 (ACPI data)
BIOS-e820: 000000003ff7a000 - 000000003ff80000 (ACPI NVS)
BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f6790
DMI present.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:4 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xfec84000] gsi_base[24])
IOAPIC[1]: apic_id 3, version 32, address 0xfec84000, GSI 24-47
ACPI: IOAPIC (id[0x04] address[0xfec84400] gsi_base[48])
IOAPIC[2]: apic_id 4, version 32, address 0xfec84400, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Enabling APIC mode: Flat. Using 3 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
Built 1 zonelists
Kernel command line: root=/dev/sda1 ro console=ttyS0,9600n8
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 2800.704 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1034136k/1048000k available (2098k kernel code, 12972k reserved, 1222k data, 204k init, 130496k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 5608.50 BogoMIPS (lpj=11217008)
Mount-cache hash table entries: 512
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel(R) Xeon(TM) CPU 2.80GHz stepping 01
Booting processor 1/1 eip 2000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5600.65 BogoMIPS (lpj=11201307)
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU1: Intel(R) Xeon(TM) CPU 2.80GHz stepping 01
Total of 2 processors activated (11209.15 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd83a, last bus=7
PCI: Using MMCONFIG
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 1180-11bf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
PCI: PXH quirk detected, disabling MSI for SHPC device
PCI: PXH quirk detected, disabling MSI for SHPC device
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 *11 14 15)
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
PCI: Bridge: 0000:00:02.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:04.0
IO window: disabled.
MEM window: dd100000-dd1fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:05.0
IO window: disabled.
MEM window: dd200000-dd2fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:04:00.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:04:00.2
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:06.0
IO window: disabled.
MEM window: dd300000-dd3fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: 2000-2fff
MEM window: dd400000-deffffff
PREFETCH window: 50000000-500fffff
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16
Simple Boot Flag at 0x3b set to 0x1
highmem bounce pool size: 64 pages
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Processor [CPU1] (supports 8 throttling states)
Real Time Clock Driver v1.12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
Intel(R) PRO/1000 Network Driver - version 6.1.16-k2-NAPI
Copyright (c) 1999-2005 Intel Corporation.
Ethernet Channel Bonding Driver: v2.6.5 (November 4, 2005)
bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.
tg3.c:v3.43 (Oct 24, 2005)
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
eth0: Tigon3 [partno(BCM95721) rev 4101 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:14:c2:54:b4:b6
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[76180000]
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
eth1: Tigon3 [partno(BCM95721) rev 4101 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:14:c2:54:b4:b7
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
eth1: dma_rwctrl[76180000]
Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com)
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 17
ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x1470 irq 14
ata1: dev 0 ATA-7, max UDMA/100, 156301488 sectors: LBA48
ata1: dev 0 configured for UDMA/100
scsi0 : ata_piix
Vendor: ATA Model: Maxtor 6L080M0 Rev: BANC
Type: Direct-Access ANSI SCSI revision: 05
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1478 irq 15
ata2: SATA port has no device.
scsi1 : ata_piix
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
SCSI device sda: drive cache: write through
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
SCSI device sda: drive cache: write through
sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
sd 0:0:0:0: Attached scsi disk sda
mice: PS/2 mouse device common for all mice
Mirror/redirect action on
netem: version 1.1
u32 classifier
Perfomance counters on
input device check on
Actions configured
NET: Registered protocol family 2
input: AT Translated Set 2 keyboard as /class/input/input0
IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
logips2pp: Detected unknown logitech mouse model 1
input: PS/2 Logitech Mouse as /class/input/input1
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
ip_conntrack version 2.4 (8187 buckets, 65496 max) - 212 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http://snowman.net/projects/ipt_recent/
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
Starting balanced_irq
Using IPI Shortcut mode
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 204k freed
INIT: version 2.86 booting
Activating swap.
Adding 2714944k swap on /dev/sda7. Priority:-1 extents:1 across:2714944k
Checking root file system...
fsck 1.37 (21-Mar-2005)
/: clean, 6566/136544 files, 441EXT3 FS on sda1, 68/273073 blocksinternal journal
System time was Thu Dec 1 10:55:29 UTC 2005.
Setting the System Clock using the Hardware Clock as reference...
System Clock set. System local time is now Thu Dec 1 10:55:31 UTC 2005.
Cleaning up ifupdown...done.
Checking all file systems...
fsck 1.37 (21-Mar-2005)
/home: clean, 22860/8372224 files, 366885/16737714 blocks
/tmp: clean, 11/192768 files, 32456/393217 blocks
/usr: clean, 18050/kjournald starting. Commit interval 5 seconds
610432 files, 86EXT3 FS on sda9, internal journal
948/1220932 blocEXT3-fs: mounted filesystem with ordered data mode.
ks
/var: clean,kjournald starting. Commit interval 5 seconds
1295/366528 filEXT3 FS on sda8, internal journal
es, 40433/732957EXT3-fs: mounted filesystem with ordered data mode.
blocks
Setting kernel variables ...
... done.kjournald starting. Commit interval 5 seconds
Mounting localEXT3 FS on sda5, internal journal
filesystems...EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
tg3: eth0: Link is up at 100 Mbps, full duplex.
tg3: eth0: Flow control is off for TX and off for RX.
INIT: Entering runlevel: 2
Starting system log daemon: syslogd.
Starting kernel log daemon: klogd.
Starting MTA: exim4.
Starting internet superserver: inetd.
Starting SMP IRQ Balancer: irqbalance.
Starting OpenBSD Secure Shell server: sshd.
Starting deferred execution scheduler: atd.
Starting periodic command scheduler: cron.
--
Jean-François "Jef" Stenuit
Network & Security manager
Keytrade Bank SA
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/x-pkcs7-signature, Size: 3182 bytes --]
next prev parent reply other threads:[~2005-12-01 11:20 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <438B6E05.8070009@eq.cz>
2005-11-30 4:35 ` totally random "VFS: Cannot open root device" Tejun Heo
2005-11-30 9:05 ` Jean-François Stenuit
2005-11-30 16:30 ` Randy.Dunlap
2005-12-01 9:42 ` Jean-François Stenuit
2005-12-01 11:20 ` Jean-François Stenuit [this message]
2005-11-30 13:07 ` 0602
2005-11-30 22:05 ` Keith Mannthey
2005-12-01 9:40 ` Jean-François Stenuit
2005-12-01 11:20 ` Tejun Heo
2005-12-01 12:59 ` Jean-François Stenuit
2005-12-01 13:29 ` Tejun Heo
2005-12-01 15:34 ` 0602
2005-12-02 1:53 ` Jeff Garzik
2005-12-02 3:00 ` Tejun Heo
2005-12-02 3:26 ` [PATCH] ata_piix: ignore all zero PCS value on ICH5's Tejun Heo
2005-12-02 12:40 ` 0602
2005-12-05 10:07 ` Jean-François Stenuit
2005-12-05 10:17 ` Tejun Heo
2006-01-29 5:22 ` Jeff Garzik
2006-02-01 2:01 ` Tejun Heo
2006-02-09 9:23 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=438EDC7D.2020704@keytradebank.com \
--to=jfs@keytradebank.com \
--cc=0602@eq.cz \
--cc=htejun@gmail.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).