From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mark Lord Subject: Re: [PATCH 0/6] SATA use ACPI methods for PM Date: Sun, 11 Dec 2005 23:26:37 -0500 Message-ID: <439CFBFD.5010404@pobox.com> References: <20051202101637.2167851a.randy_d_dunlap@linux.intel.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from vds.fauxbox.com ([208.210.124.75]:34517 "EHLO thorn.pobox.com") by vger.kernel.org with ESMTP id S1751086AbVLLE0n (ORCPT ); Sun, 11 Dec 2005 23:26:43 -0500 In-Reply-To: <20051202101637.2167851a.randy_d_dunlap@linux.intel.com> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Randy Dunlap Cc: ide , axboe , jgarzik Randy Dunlap wrote: > This is an update to the SATA suspend/resume patches > to use ACPI methods (specifically _SDD and _GTF). > This patch series applies to 2.6.15-rc4. > > It boots but needs lots of testing & review/comments, > as well as adding a call to write taskfiles on > COMRESET event(s) (at least on async. loss of signal). This sequence of patches FIXED the problem I was having until now with my Dell Inspiron. It usually fails the suspend/resume (RAM) test with a Hitachi 80GB drive installed, but this patch series makes even that combo work just fine. The regular Fujitsu 100GB drive works regardless, so long as Jens' original patch is applied. Cheers -- Mark Lord Real-Time Remedies Inc. mlord@pobox.com