* sata_sis on Ubuntu 5.10
@ 2006-01-22 20:55 Chris Bamford
2006-01-23 13:47 ` Bartlomiej Zolnierkiewicz
0 siblings, 1 reply; 5+ messages in thread
From: Chris Bamford @ 2006-01-22 20:55 UTC (permalink / raw)
To: touch; +Cc: linux-ide
[-- Attachment #1: Type: text/plain, Size: 1142 bytes --]
Hi Uwe,
I have been unsuccessfully trying to get Linux to work with my SATA disk
on my ASUS Vintage AE-1 barebone machine.
I have posted to the ASUS support site (see
http://vip.asus.com/eservice/techmailstatus.aspx?ID=WTM200601212130302557),
and am still waiting for a reply.
For more background on the problem, please see the attached message
which I sent to the ubuntu-users mailing list - which did not produce
any answers.
The BIOS can see the SATA disk, but Linux does not!
If I type "lsmod | grep -i ata" it returns nothing (no 'ata' drivers
loaded). If I type 'locate sata_sis', it finds 2 copies, so I assume it
should be OK if I load the drivers with modprobe:
mobprobe sat_sis
modprobe ata
"lsmod | grep -i ata" now shows them loaded, but what do I do next? the
devices /dev/sd* are not present, so I cannot access the disk. Am I
missing a step?
I tried to build the driver from the sources provided on the CD with the
machine, but it would not build (filesystem layout differences between
Fedora and Debian??).
Anyway, please help!
Any pointers/info/etc would be gratefully received.
Thanks,
- Chris
[-- Attachment #2: Attached Message.eml --]
[-- Type: message/rfc822, Size: 19608 bytes --]
[-- Attachment #2.1.1: Type: text/plain, Size: 890 bytes --]
Hi - I've recently bought an ASUS Vintage-AE1 bare bone system and
installed Breezy Badger on it. All aspects of the system work fine
except the SATA disk which is recognised by the BIOS, but not seen at
all by Ubuntu. The BIOS supports the following configuration options
for the onboard PCI SATA Controller:
* disabled
* native
* RAID by ROM
None of these seem to help.
I have checked the mailing list and searched the Ubuntu bugzilla but
have had no joy.
The system chipset is the SIS 760GX and supports Serial ATA RAID.
The disk is a MAXTOR 6L250S0 250Gb drive.
Frustratingly, if I boot from a Tom's Root Boot CD, the disk is visible
as /dev/hde, so I know it does work! I am assuming that Ubuntu is
either not loading the correct driver or having a problem initialising
it. I attach the dmesg bootlog from Ubuntu.
Please can anyone advise?
Thanks
Chris
[-- Attachment #2.1.2: ubuntu5.10.dmesg --]
[-- Type: text/plain, Size: 15643 bytes --]
04000508 MSFT 0x00000097) @ 0x3df40390
[4294667.296000] ACPI: OEMB (v001 A M I AMI_OEM 0x04000508 MSFT 0x00000097) @ 0x3df50040
[4294667.296000] ACPI: DSDT (v001 A0253 A0253203 0x00000203 INTL 0x02002026) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0x808
[4294667.296000] ACPI: Local APIC address 0xfee00000
[4294667.296000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[4294667.296000] Processor #0 15:12 APIC version 16
[4294667.296000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[4294667.296000] IOAPIC[0]: apic_id 1, version 20, address 0xfec00000, GSI 0-23
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[4294667.296000] ACPI: IRQ0 used by override.
[4294667.296000] ACPI: IRQ2 used by override.
[4294667.296000] ACPI: IRQ9 used by override.
[4294667.296000] Enabling APIC mode: Flat. Using 1 I/O APICs
[4294667.296000] Using ACPI (MADT) for SMP configuration information
[4294667.296000] Allocating PCI resources starting at 3e000000 (gap: 3e000000:c17c0000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/hda1 ro quiet splash
[4294667.296000] mapped APIC to ffffd000 (fee00000)
[4294667.296000] mapped IOAPIC to ffffc000 (fec00000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[4294667.296000] Detected 1995.667 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294667.703000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[4294667.704000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294667.719000] Memory: 997740k/1015040k available (1416k kernel code, 16612k reserved, 762k data, 224k init, 97536k highmem)
[4294667.719000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294667.719000] Calibrating delay loop... 3964.92 BogoMIPS (lpj=1982464)
[4294667.741000] Security Framework v1.0.0 initialized
[4294667.741000] SELinux: Disabled at boot.
[4294667.741000] Mount-cache hash table entries: 512
[4294667.741000] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
[4294667.741000] CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
[4294667.741000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[4294667.741000] CPU: L2 Cache: 512K (64 bytes/line)
[4294667.741000] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000010 00000001 00000000 00000001
[4294667.741000] CPU: AMD Athlon(tm) 64 Processor 3000+ stepping 02
[4294667.741000] Enabling fast FPU save and restore... done.
[4294667.741000] Enabling unmasked SIMD FPU exception support... done.
[4294667.741000] Checking 'hlt' instruction... OK.
[4294667.745000] Checking for popad bug... OK.
[4294667.745000] checking if image is initramfs... it is
[4294668.134000] Freeing initrd memory: 5171k freed
[4294668.134000] ACPI: Looking for DSDT in initrd... not found!
[4294668.178000] not found!
[4294668.185000] ENABLING IO-APIC IRQs
[4294668.185000] ..TIMER: vector=0x31 pin1=2 pin2=-1
[4294668.296000] NET: Registered protocol family 16
[4294668.296000] EISA bus registered
[4294668.296000] ACPI: bus type pci registered
[4294668.296000] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3
[4294668.296000] PCI: Using configuration type 1
[4294668.296000] mtrr: v2.0 (20020519)
[4294668.296000] ACPI: Subsystem revision 20050729
[4294668.303000] ACPI: Interpreter enabled
[4294668.303000] ACPI: Using IOAPIC for interrupt routing
[4294668.304000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294668.304000] PCI: Probing PCI hardware (bus 00)
[4294668.304000] ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
[4294668.307000] Boot video device is 0000:01:00.0
[4294668.317000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294668.317000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[4294668.322000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[4294668.322000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[4294668.322000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15)
[4294668.323000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 12 14 15)
[4294668.323000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15)
[4294668.323000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15)
[4294668.323000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 10 11 12 14 15)
[4294668.323000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 *10 11 12 14 15)
[4294668.324000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 7 10 11 12 14 15)
[4294668.324000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *10 11 12 14 15)
[4294668.324000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294668.324000] pnp: PnP ACPI init
[4294668.328000] pnp: PnP ACPI: found 11 devices
[4294668.328000] PnPBIOS: Disabled by ACPI PNP
[4294668.328000] PCI: Using ACPI for IRQ routing
[4294668.328000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[4294668.338000] pnp: 00:08: ioport range 0x290-0x297 has been reserved
[4294668.338000] audit: initializing netlink socket (disabled)
[4294668.339000] audit: initialized
[4294668.339000] highmem bounce pool size: 64 pages
[4294668.339000] VFS: Disk quotas dquot_6.5.1
[4294668.339000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294668.339000] devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
[4294668.339000] devfs: boot_options: 0x0
[4294668.339000] Initializing Cryptographic API
[4294668.339000] isapnp: Scanning for PnP cards...
[4294668.693000] isapnp: No Plug & Play device found
[4294668.705000] PNP: No PS/2 controller found. Probing ports directly.
[4294668.706000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294668.706000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294668.706000] Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
[4294668.706000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294668.706000] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294668.707000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294668.707000] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294668.707000] io scheduler noop registered
[4294668.707000] io scheduler anticipatory registered
[4294668.707000] io scheduler deadline registered
[4294668.707000] io scheduler cfq registered
[4294668.708000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[4294668.708000] EISA: Probing bus 0 at eisa.0
[4294668.708000] Cannot allocate resource for EISA slot 8
[4294668.708000] EISA: Detected 0 cards.
[4294668.708000] NET: Registered protocol family 2
[4294668.717000] IP: routing cache hash table of 8192 buckets, 64Kbytes
[4294668.717000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[4294668.718000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[4294668.718000] TCP: Hash tables configured (established 131072 bind 65536)
[4294668.718000] NET: Registered protocol family 8
[4294668.718000] NET: Registered protocol family 20
[4294668.718000] ACPI wakeup devices:
[4294668.718000] EUSB USB USB2 USB3 AC97 MC97 PCI1 PCI2 MAC
[4294668.718000] ACPI: (supports S0 S1 S3 S4 S5)
[4294668.718000] Freeing unused kernel memory: 224k freed
[4294668.731000] vga16fb: initializing
[4294668.731000] vga16fb: mapped to 0xc00a0000
[4294668.814000] Console: switching to colour frame buffer device 80x30
[4294668.814000] fb0: VGA16 VGA frame buffer device
[4294669.882000] Capability LSM initialized
[4294669.891000] NET: Registered protocol family 1
[4294669.900000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294669.900000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294669.900000] ACPI: bus type ide registered
[4294669.914000] SIS5513: IDE controller at PCI slot 0000:00:02.5
[4294669.914000] SIS5513: chipset revision 1
[4294669.914000] SIS5513: not 100% native mode: will probe irqs later
[4294669.914000] SIS5513: IDE controller at PCI slot 0000:00:02.5
[4294669.914000] SIS5513: chipset revision 1
[4294669.914000] SIS5513: not 100% native mode: will probe irqs later
[4294669.914000] SIS_IDE: probe of 0000:00:02.5 failed with error -1
[4294669.914000] Probing IDE interface ide0...
[4294670.298000] hda: QUANTUM FIREBALL CR6.4A, ATA DISK drive
[4294670.706000] hdb: SONY DVD RW DW-Q30A, ATAPI CD/DVD-ROM drive
[4294670.757000] Probing IDE interface ide1...
[4294671.275000] Probing IDE interface ide2...
[4294671.787000] Probing IDE interface ide3...
[4294672.299000] Probing IDE interface ide4...
[4294672.811000] Probing IDE interface ide5...
[4294673.323000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294673.325000] hda: max request size: 128KiB
[4294673.340000] hda: 12594960 sectors (6448 MB) w/418KiB Cache, CHS=13328/15/63
[4294673.340000] hda: cache flushes not supported
[4294673.340000] /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 >
[4294673.372000] hdb: ATAPI 8X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
[4294673.372000] Uniform CD-ROM driver Revision: 3.20
[4294673.598000] Attempting manual resume
[4294673.604000] swsusp: Suspend partition has wrong signature?
[4294673.641000] usbcore: registered new driver usbfs
[4294673.641000] usbcore: registered new driver hub
[4294673.641000] ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[4294673.641000] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 20
[4294673.641000] ohci_hcd 0000:00:03.0: Silicon Integrated Systems [SiS] USB 1.0 Controller
[4294673.674000] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
[4294673.674000] ohci_hcd 0000:00:03.0: irq 20, io mem 0xfbefc000
[4294673.727000] hub 1-0:1.0: USB hub found
[4294673.727000] hub 1-0:1.0: 3 ports detected
[4294673.730000] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 21
[4294673.730000] ohci_hcd 0000:00:03.1: Silicon Integrated Systems [SiS] USB 1.0 Controller (#2)
[4294673.741000] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
[4294673.741000] ohci_hcd 0000:00:03.1: irq 21, io mem 0xfbefd000
[4294673.794000] hub 2-0:1.0: USB hub found
[4294673.794000] hub 2-0:1.0: 3 ports detected
[4294673.797000] ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 22
[4294673.797000] ohci_hcd 0000:00:03.2: Silicon Integrated Systems [SiS] USB 1.0 Controller (#3)
[4294673.808000] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
[4294673.808000] ohci_hcd 0000:00:03.2: irq 22, io mem 0xfbefe000
[4294673.861000] hub 3-0:1.0: USB hub found
[4294673.861000] hub 3-0:1.0: 2 ports detected
[4294673.882000] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 23
[4294673.882000] ehci_hcd 0000:00:03.3: Silicon Integrated Systems [SiS] USB 2.0 Controller
[4294673.882000] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4
[4294673.882000] ehci_hcd 0000:00:03.3: irq 23, io mem 0xfbeff000
[4294673.882000] PCI: cache line size of 64 is not supported by device 0000:00:03.3
[4294673.882000] ehci_hcd 0000:00:03.3: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
[4294673.882000] hub 4-0:1.0: USB hub found
[4294673.882000] hub 4-0:1.0: 8 ports detected
[4294673.933000] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 16 (level, low) -> IRQ 16
[4294673.933000] 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
[4294673.933000] 0000:00:09.0: 3Com PCI 3c905 Boomerang 100baseTx at 0x8800. Vers LK1.1.19
[4294673.954000] eth0: Dropping NETIF_F_SG since no checksum feature.
[4294674.497000] usb 1-2: new low speed USB device using ohci_hcd and address 3
[4294674.773000] usb 3-1: new full speed USB device using ohci_hcd and address 2
[4294674.883000] hub 3-1:1.0: USB hub found
[4294674.886000] hub 3-1:1.0: 3 ports detected
[4294675.091000] usb 3-1.1: new full speed USB device using ohci_hcd and address 3
[4294675.997000] usbcore: registered new driver hiddev
[4294676.006000] input: USB HID v1.00 Mouse [04b3:3108] on usb-0000:00:03.0-2
[4294676.014000] input: USB HID v1.10 Keyboard [Lite-On Technology USB Productivity Option Keyboard( has the hu] on usb-0000:00:03.2-1.1
[4294676.023000] input: USB HID v1.10 Device [Lite-On Technology USB Productivity Option Keyboard( has the hu] on usb-0000:00:03.2-1.1
[4294676.023000] usbcore: registered new driver usbhid
[4294676.023000] drivers/usb/input/hid-core.c: v2.01:USB HID core driver
[4294676.311000] ACPI: CPU0 (power states: C1[C1])
[4294676.422000] Attempting manual resume
[4294676.424000] swsusp: Suspend partition has wrong signature?
[4294676.458000] kjournald starting. Commit interval 5 seconds
[4294676.458000] EXT3-fs: mounted filesystem with ordered data mode.
[4294678.927000] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294682.589000] Adding 297160k swap on /dev/hda5. Priority:-1 extents:1
[4294682.924000] EXT3 FS on hda1, internal journal
[4294709.059000] parport: PnPBIOS parport detected.
[4294709.060000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[4294709.146000] lp0: using parport0 (interrupt-driven).
[4294709.177000] mice: PS/2 mouse device common for all mice
[4294711.819000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[4294716.368000] Linux agpgart interface v0.101 (c) Dave Jones
[4294716.375000] agpgart: Detected SiS 760 chipset
[4294716.398000] agpgart: AGP aperture is 4M @ 0xf4000000
[4294716.779000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294716.892000] shpchp: shpc_init : shpc_cap_offset == 0
[4294716.893000] shpchp: shpc_init : shpc_cap_offset == 0
[4294716.893000] shpchp: shpc_init : shpc_cap_offset == 0
[4294716.894000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294717.538000] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 18
[4294717.851000] intel8x0_measure_ac97_clock: measured 49372 usecs
[4294717.851000] intel8x0: clocking to 48000
[4294724.282000] Real Time Clock Driver v1.12
[4294724.388000] input: PC Speaker
[4294724.533000] Floppy drive(s): fd0 is 1.44M
[4294724.548000] FDC 0 is a post-1991 82077
[4294727.046000] ts: Compaq touchscreen protocol output
[4294728.072000] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 16 (level, low) -> IRQ 16
[4294728.083000] NET: Registered protocol family 17
[4294732.924000] NET: Registered protocol family 10
[4294732.924000] Disabled Privacy Extensions on device c02eb280(lo)
[4294732.924000] IPv6 over IPv4 tunneling driver
[4294733.888000] ACPI: Power Button (FF) [PWRF]
[4294733.888000] ACPI: Power Button (CM) [PWRB]
[4294733.969000] ibm_acpi: ec object not found
[4294743.664000] eth0: no IPv6 routers present
[4294751.734000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[4294751.734000] apm: overridden by ACPI.
[4294753.086000] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.40.4)
[4294753.088000] powernow-k8: BIOS error - no PSB or ACPI _PSS objects
[4294754.904000] Bluetooth: Core ver 2.7
[4294754.904000] NET: Registered protocol family 31
[4294754.904000] Bluetooth: HCI device and connection manager initialized
[4294754.904000] Bluetooth: HCI socket layer initialized
[4294754.949000] Bluetooth: L2CAP ver 2.7
[4294754.949000] Bluetooth: L2CAP socket layer initialized
[4294754.982000] Bluetooth: RFCOMM ver 1.5
[4294754.982000] Bluetooth: RFCOMM socket layer initialized
[4294754.982000] Bluetooth: RFCOMM TTY layer initialized
[4298199.820000] ISO 9660 Extensions: RRIP_1991A
[-- Attachment #2.1.3: Type: text/plain, Size: 114 bytes --]
--
ubuntu-users mailing list
ubuntu-users@lists.ubuntu.com
http://lists.ubuntu.com/mailman/listinfo/ubuntu-users
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: sata_sis on Ubuntu 5.10
2006-01-22 20:55 sata_sis on Ubuntu 5.10 Chris Bamford
@ 2006-01-23 13:47 ` Bartlomiej Zolnierkiewicz
2006-01-23 20:55 ` Chris Bamford
0 siblings, 1 reply; 5+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2006-01-23 13:47 UTC (permalink / raw)
To: Chris Bamford; +Cc: touch, linux-ide, Ben Collins
On 1/22/06, Chris Bamford <chris@bammers.net> wrote:
> Hi Uwe,
>
> I have been unsuccessfully trying to get Linux to work with my SATA disk
> on my ASUS Vintage AE-1 barebone machine.
>
> I have posted to the ASUS support site (see
> http://vip.asus.com/eservice/techmailstatus.aspx?ID=WTM200601212130302557),
> and am still waiting for a reply.
> For more background on the problem, please see the attached message
> which I sent to the ubuntu-users mailing list - which did not produce
> any answers.
Thread is here:
https://lists.ubuntu.com/archives/ubuntu-users/2006-January/063781.html
> The BIOS can see the SATA disk, but Linux does not!
> If I type "lsmod | grep -i ata" it returns nothing (no 'ata' drivers
> loaded). If I type 'locate sata_sis', it finds 2 copies, so I assume it
> should be OK if I load the drivers with modprobe:
>
> mobprobe sat_sis
> modprobe ata
>
> "lsmod | grep -i ata" now shows them loaded, but what do I do next? the
> devices /dev/sd* are not present, so I cannot access the disk. Am I
> missing a step?
Don't know, you didn't send output of lsmod command.
Does loading sata_sis module produces any messages?
> I tried to build the driver from the sources provided on the CD with the
> machine, but it would not build (filesystem layout differences between
> Fedora and Debian??).
>
> Anyway, please help!
>
> Any pointers/info/etc would be gratefully received.
What kernel version are you using?
What is the lspci -vvv output?
AFAICS:
* Ubuntu 5.10 is based on kernel 2.6.12.6
* SiS 182 support was added in kernel 2.6.14
Ben, any suggestion?
Thanks,
Bartlomiej
> Thanks,
>
> - Chris
>
>
>
> Hi - I've recently bought an ASUS Vintage-AE1 bare bone system and
> installed Breezy Badger on it. All aspects of the system work fine
> except the SATA disk which is recognised by the BIOS, but not seen at
> all by Ubuntu. The BIOS supports the following configuration options
> for the onboard PCI SATA Controller:
>
> * disabled
> * native
> * RAID by ROM
>
> None of these seem to help.
>
> I have checked the mailing list and searched the Ubuntu bugzilla but
> have had no joy.
>
> The system chipset is the SIS 760GX and supports Serial ATA RAID.
> The disk is a MAXTOR 6L250S0 250Gb drive.
>
> Frustratingly, if I boot from a Tom's Root Boot CD, the disk is visible
> as /dev/hde, so I know it does work! I am assuming that Ubuntu is
> either not loading the correct driver or having a problem initialising
> it. I attach the dmesg bootlog from Ubuntu.
>
> Please can anyone advise?
>
>
> Thanks
> Chris
>
>
> 04000508 MSFT 0x00000097) @ 0x3df40390
> [4294667.296000] ACPI: OEMB (v001 A M I AMI_OEM 0x04000508 MSFT 0x00000097) @ 0x3df50040
> [4294667.296000] ACPI: DSDT (v001 A0253 A0253203 0x00000203 INTL 0x02002026) @ 0x00000000
> [4294667.296000] ACPI: PM-Timer IO Port: 0x808
> [4294667.296000] ACPI: Local APIC address 0xfee00000
> [4294667.296000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> [4294667.296000] Processor #0 15:12 APIC version 16
> [4294667.296000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
> [4294667.296000] IOAPIC[0]: apic_id 1, version 20, address 0xfec00000, GSI 0-23
> [4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
> [4294667.296000] ACPI: IRQ0 used by override.
> [4294667.296000] ACPI: IRQ2 used by override.
> [4294667.296000] ACPI: IRQ9 used by override.
> [4294667.296000] Enabling APIC mode: Flat. Using 1 I/O APICs
> [4294667.296000] Using ACPI (MADT) for SMP configuration information
> [4294667.296000] Allocating PCI resources starting at 3e000000 (gap: 3e000000:c17c0000)
> [4294667.296000] Built 1 zonelists
> [4294667.296000] Kernel command line: root=/dev/hda1 ro quiet splash
> [4294667.296000] mapped APIC to ffffd000 (fee00000)
> [4294667.296000] mapped IOAPIC to ffffc000 (fec00000)
> [4294667.296000] Initializing CPU#0
> [4294667.296000] PID hash table entries: 4096 (order: 12, 65536 bytes)
> [4294667.296000] Detected 1995.667 MHz processor.
> [4294667.296000] Using pmtmr for high-res timesource
> [4294667.296000] Console: colour VGA+ 80x25
> [4294667.703000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> [4294667.704000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> [4294667.719000] Memory: 997740k/1015040k available (1416k kernel code, 16612k reserved, 762k data, 224k init, 97536k highmem)
> [4294667.719000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
> [4294667.719000] Calibrating delay loop... 3964.92 BogoMIPS (lpj=1982464)
> [4294667.741000] Security Framework v1.0.0 initialized
> [4294667.741000] SELinux: Disabled at boot.
> [4294667.741000] Mount-cache hash table entries: 512
> [4294667.741000] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
> [4294667.741000] CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
> [4294667.741000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> [4294667.741000] CPU: L2 Cache: 512K (64 bytes/line)
> [4294667.741000] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000010 00000001 00000000 00000001
> [4294667.741000] CPU: AMD Athlon(tm) 64 Processor 3000+ stepping 02
> [4294667.741000] Enabling fast FPU save and restore... done.
> [4294667.741000] Enabling unmasked SIMD FPU exception support... done.
> [4294667.741000] Checking 'hlt' instruction... OK.
> [4294667.745000] Checking for popad bug... OK.
> [4294667.745000] checking if image is initramfs... it is
> [4294668.134000] Freeing initrd memory: 5171k freed
> [4294668.134000] ACPI: Looking for DSDT in initrd... not found!
> [4294668.178000] not found!
> [4294668.185000] ENABLING IO-APIC IRQs
> [4294668.185000] ..TIMER: vector=0x31 pin1=2 pin2=-1
> [4294668.296000] NET: Registered protocol family 16
> [4294668.296000] EISA bus registered
> [4294668.296000] ACPI: bus type pci registered
> [4294668.296000] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3
> [4294668.296000] PCI: Using configuration type 1
> [4294668.296000] mtrr: v2.0 (20020519)
> [4294668.296000] ACPI: Subsystem revision 20050729
> [4294668.303000] ACPI: Interpreter enabled
> [4294668.303000] ACPI: Using IOAPIC for interrupt routing
> [4294668.304000] ACPI: PCI Root Bridge [PCI0] (0000:00)
> [4294668.304000] PCI: Probing PCI hardware (bus 00)
> [4294668.304000] ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
> [4294668.307000] Boot video device is 0000:01:00.0
> [4294668.317000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> [4294668.317000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
> [4294668.322000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
> [4294668.322000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
> [4294668.322000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15)
> [4294668.323000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 12 14 15)
> [4294668.323000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15)
> [4294668.323000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15)
> [4294668.323000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 10 11 12 14 15)
> [4294668.323000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 *10 11 12 14 15)
> [4294668.324000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 7 10 11 12 14 15)
> [4294668.324000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *10 11 12 14 15)
> [4294668.324000] Linux Plug and Play Support v0.97 (c) Adam Belay
> [4294668.324000] pnp: PnP ACPI init
> [4294668.328000] pnp: PnP ACPI: found 11 devices
> [4294668.328000] PnPBIOS: Disabled by ACPI PNP
> [4294668.328000] PCI: Using ACPI for IRQ routing
> [4294668.328000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
> [4294668.338000] pnp: 00:08: ioport range 0x290-0x297 has been reserved
> [4294668.338000] audit: initializing netlink socket (disabled)
> [4294668.339000] audit: initialized
> [4294668.339000] highmem bounce pool size: 64 pages
> [4294668.339000] VFS: Disk quotas dquot_6.5.1
> [4294668.339000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> [4294668.339000] devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
> [4294668.339000] devfs: boot_options: 0x0
> [4294668.339000] Initializing Cryptographic API
> [4294668.339000] isapnp: Scanning for PnP cards...
> [4294668.693000] isapnp: No Plug & Play device found
> [4294668.705000] PNP: No PS/2 controller found. Probing ports directly.
> [4294668.706000] serio: i8042 AUX port at 0x60,0x64 irq 12
> [4294668.706000] serio: i8042 KBD port at 0x60,0x64 irq 1
> [4294668.706000] Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
> [4294668.706000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [4294668.706000] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> [4294668.707000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [4294668.707000] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> [4294668.707000] io scheduler noop registered
> [4294668.707000] io scheduler anticipatory registered
> [4294668.707000] io scheduler deadline registered
> [4294668.707000] io scheduler cfq registered
> [4294668.708000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
> [4294668.708000] EISA: Probing bus 0 at eisa.0
> [4294668.708000] Cannot allocate resource for EISA slot 8
> [4294668.708000] EISA: Detected 0 cards.
> [4294668.708000] NET: Registered protocol family 2
> [4294668.717000] IP: routing cache hash table of 8192 buckets, 64Kbytes
> [4294668.717000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
> [4294668.718000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
> [4294668.718000] TCP: Hash tables configured (established 131072 bind 65536)
> [4294668.718000] NET: Registered protocol family 8
> [4294668.718000] NET: Registered protocol family 20
> [4294668.718000] ACPI wakeup devices:
> [4294668.718000] EUSB USB USB2 USB3 AC97 MC97 PCI1 PCI2 MAC
> [4294668.718000] ACPI: (supports S0 S1 S3 S4 S5)
> [4294668.718000] Freeing unused kernel memory: 224k freed
> [4294668.731000] vga16fb: initializing
> [4294668.731000] vga16fb: mapped to 0xc00a0000
> [4294668.814000] Console: switching to colour frame buffer device 80x30
> [4294668.814000] fb0: VGA16 VGA frame buffer device
> [4294669.882000] Capability LSM initialized
> [4294669.891000] NET: Registered protocol family 1
> [4294669.900000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> [4294669.900000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> [4294669.900000] ACPI: bus type ide registered
> [4294669.914000] SIS5513: IDE controller at PCI slot 0000:00:02.5
> [4294669.914000] SIS5513: chipset revision 1
> [4294669.914000] SIS5513: not 100% native mode: will probe irqs later
> [4294669.914000] SIS5513: IDE controller at PCI slot 0000:00:02.5
> [4294669.914000] SIS5513: chipset revision 1
> [4294669.914000] SIS5513: not 100% native mode: will probe irqs later
> [4294669.914000] SIS_IDE: probe of 0000:00:02.5 failed with error -1
> [4294669.914000] Probing IDE interface ide0...
> [4294670.298000] hda: QUANTUM FIREBALL CR6.4A, ATA DISK drive
> [4294670.706000] hdb: SONY DVD RW DW-Q30A, ATAPI CD/DVD-ROM drive
> [4294670.757000] Probing IDE interface ide1...
> [4294671.275000] Probing IDE interface ide2...
> [4294671.787000] Probing IDE interface ide3...
> [4294672.299000] Probing IDE interface ide4...
> [4294672.811000] Probing IDE interface ide5...
> [4294673.323000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> [4294673.325000] hda: max request size: 128KiB
> [4294673.340000] hda: 12594960 sectors (6448 MB) w/418KiB Cache, CHS=13328/15/63
> [4294673.340000] hda: cache flushes not supported
> [4294673.340000] /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 >
> [4294673.372000] hdb: ATAPI 8X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
> [4294673.372000] Uniform CD-ROM driver Revision: 3.20
> [4294673.598000] Attempting manual resume
> [4294673.604000] swsusp: Suspend partition has wrong signature?
> [4294673.641000] usbcore: registered new driver usbfs
> [4294673.641000] usbcore: registered new driver hub
> [4294673.641000] ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
> [4294673.641000] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 20
> [4294673.641000] ohci_hcd 0000:00:03.0: Silicon Integrated Systems [SiS] USB 1.0 Controller
> [4294673.674000] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
> [4294673.674000] ohci_hcd 0000:00:03.0: irq 20, io mem 0xfbefc000
> [4294673.727000] hub 1-0:1.0: USB hub found
> [4294673.727000] hub 1-0:1.0: 3 ports detected
> [4294673.730000] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 21
> [4294673.730000] ohci_hcd 0000:00:03.1: Silicon Integrated Systems [SiS] USB 1.0 Controller (#2)
> [4294673.741000] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
> [4294673.741000] ohci_hcd 0000:00:03.1: irq 21, io mem 0xfbefd000
> [4294673.794000] hub 2-0:1.0: USB hub found
> [4294673.794000] hub 2-0:1.0: 3 ports detected
> [4294673.797000] ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 22
> [4294673.797000] ohci_hcd 0000:00:03.2: Silicon Integrated Systems [SiS] USB 1.0 Controller (#3)
> [4294673.808000] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
> [4294673.808000] ohci_hcd 0000:00:03.2: irq 22, io mem 0xfbefe000
> [4294673.861000] hub 3-0:1.0: USB hub found
> [4294673.861000] hub 3-0:1.0: 2 ports detected
> [4294673.882000] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 23
> [4294673.882000] ehci_hcd 0000:00:03.3: Silicon Integrated Systems [SiS] USB 2.0 Controller
> [4294673.882000] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4
> [4294673.882000] ehci_hcd 0000:00:03.3: irq 23, io mem 0xfbeff000
> [4294673.882000] PCI: cache line size of 64 is not supported by device 0000:00:03.3
> [4294673.882000] ehci_hcd 0000:00:03.3: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
> [4294673.882000] hub 4-0:1.0: USB hub found
> [4294673.882000] hub 4-0:1.0: 8 ports detected
> [4294673.933000] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 16 (level, low) -> IRQ 16
> [4294673.933000] 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
> [4294673.933000] 0000:00:09.0: 3Com PCI 3c905 Boomerang 100baseTx at 0x8800. Vers LK1.1.19
> [4294673.954000] eth0: Dropping NETIF_F_SG since no checksum feature.
> [4294674.497000] usb 1-2: new low speed USB device using ohci_hcd and address 3
> [4294674.773000] usb 3-1: new full speed USB device using ohci_hcd and address 2
> [4294674.883000] hub 3-1:1.0: USB hub found
> [4294674.886000] hub 3-1:1.0: 3 ports detected
> [4294675.091000] usb 3-1.1: new full speed USB device using ohci_hcd and address 3
> [4294675.997000] usbcore: registered new driver hiddev
> [4294676.006000] input: USB HID v1.00 Mouse [04b3:3108] on usb-0000:00:03.0-2
> [4294676.014000] input: USB HID v1.10 Keyboard [Lite-On Technology USB Productivity Option Keyboard( has the hu] on usb-0000:00:03.2-1.1
> [4294676.023000] input: USB HID v1.10 Device [Lite-On Technology USB Productivity Option Keyboard( has the hu] on usb-0000:00:03.2-1.1
> [4294676.023000] usbcore: registered new driver usbhid
> [4294676.023000] drivers/usb/input/hid-core.c: v2.01:USB HID core driver
> [4294676.311000] ACPI: CPU0 (power states: C1[C1])
> [4294676.422000] Attempting manual resume
> [4294676.424000] swsusp: Suspend partition has wrong signature?
> [4294676.458000] kjournald starting. Commit interval 5 seconds
> [4294676.458000] EXT3-fs: mounted filesystem with ordered data mode.
> [4294678.927000] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
> [4294682.589000] Adding 297160k swap on /dev/hda5. Priority:-1 extents:1
> [4294682.924000] EXT3 FS on hda1, internal journal
> [4294709.059000] parport: PnPBIOS parport detected.
> [4294709.060000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
> [4294709.146000] lp0: using parport0 (interrupt-driven).
> [4294709.177000] mice: PS/2 mouse device common for all mice
> [4294711.819000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
> [4294716.368000] Linux agpgart interface v0.101 (c) Dave Jones
> [4294716.375000] agpgart: Detected SiS 760 chipset
> [4294716.398000] agpgart: AGP aperture is 4M @ 0xf4000000
> [4294716.779000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [4294716.892000] shpchp: shpc_init : shpc_cap_offset == 0
> [4294716.893000] shpchp: shpc_init : shpc_cap_offset == 0
> [4294716.893000] shpchp: shpc_init : shpc_cap_offset == 0
> [4294716.894000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> [4294717.538000] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 18
> [4294717.851000] intel8x0_measure_ac97_clock: measured 49372 usecs
> [4294717.851000] intel8x0: clocking to 48000
> [4294724.282000] Real Time Clock Driver v1.12
> [4294724.388000] input: PC Speaker
> [4294724.533000] Floppy drive(s): fd0 is 1.44M
> [4294724.548000] FDC 0 is a post-1991 82077
> [4294727.046000] ts: Compaq touchscreen protocol output
> [4294728.072000] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 16 (level, low) -> IRQ 16
> [4294728.083000] NET: Registered protocol family 17
> [4294732.924000] NET: Registered protocol family 10
> [4294732.924000] Disabled Privacy Extensions on device c02eb280(lo)
> [4294732.924000] IPv6 over IPv4 tunneling driver
> [4294733.888000] ACPI: Power Button (FF) [PWRF]
> [4294733.888000] ACPI: Power Button (CM) [PWRB]
> [4294733.969000] ibm_acpi: ec object not found
> [4294743.664000] eth0: no IPv6 routers present
> [4294751.734000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
> [4294751.734000] apm: overridden by ACPI.
> [4294753.086000] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.40.4)
> [4294753.088000] powernow-k8: BIOS error - no PSB or ACPI _PSS objects
> [4294754.904000] Bluetooth: Core ver 2.7
> [4294754.904000] NET: Registered protocol family 31
> [4294754.904000] Bluetooth: HCI device and connection manager initialized
> [4294754.904000] Bluetooth: HCI socket layer initialized
> [4294754.949000] Bluetooth: L2CAP ver 2.7
> [4294754.949000] Bluetooth: L2CAP socket layer initialized
> [4294754.982000] Bluetooth: RFCOMM ver 1.5
> [4294754.982000] Bluetooth: RFCOMM socket layer initialized
> [4294754.982000] Bluetooth: RFCOMM TTY layer initialized
> [4298199.820000] ISO 9660 Extensions: RRIP_1991A
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: sata_sis on Ubuntu 5.10
2006-01-23 13:47 ` Bartlomiej Zolnierkiewicz
@ 2006-01-23 20:55 ` Chris Bamford
2006-01-23 21:15 ` Uwe Koziolek
0 siblings, 1 reply; 5+ messages in thread
From: Chris Bamford @ 2006-01-23 20:55 UTC (permalink / raw)
To: Bartlomiej Zolnierkiewicz; +Cc: bcollins, linux-ide, touch
[-- Attachment #1: Type: text/plain, Size: 1902 bytes --]
Hi Bartlomiej,
Thanks for the response! I attach a file containing (I hope) all the
answers to your questions.
Please shout if you need more.
Thanks,
- Chris
Bartlomiej Zolnierkiewicz wrote:
>On 1/22/06, Chris Bamford <chris@bammers.net> wrote:
>
>
>>Hi Uwe,
>>
>>I have been unsuccessfully trying to get Linux to work with my SATA disk
>>on my ASUS Vintage AE-1 barebone machine.
>>
>>I have posted to the ASUS support site (see
>>http://vip.asus.com/eservice/techmailstatus.aspx?ID=WTM200601212130302557),
>>and am still waiting for a reply.
>>For more background on the problem, please see the attached message
>>which I sent to the ubuntu-users mailing list - which did not produce
>>any answers.
>>
>>
>
>Thread is here:
>https://lists.ubuntu.com/archives/ubuntu-users/2006-January/063781.html
>
>
>
>>The BIOS can see the SATA disk, but Linux does not!
>>If I type "lsmod | grep -i ata" it returns nothing (no 'ata' drivers
>>loaded). If I type 'locate sata_sis', it finds 2 copies, so I assume it
>>should be OK if I load the drivers with modprobe:
>>
>> mobprobe sat_sis
>> modprobe ata
>>
>>"lsmod | grep -i ata" now shows them loaded, but what do I do next? the
>>devices /dev/sd* are not present, so I cannot access the disk. Am I
>>missing a step?
>>
>>
>
>Don't know, you didn't send output of lsmod command.
>
>Does loading sata_sis module produces any messages?
>
>
>
>>I tried to build the driver from the sources provided on the CD with the
>>machine, but it would not build (filesystem layout differences between
>>Fedora and Debian??).
>>
>>Anyway, please help!
>>
>>Any pointers/info/etc would be gratefully received.
>>
>>
>
>What kernel version are you using?
>What is the lspci -vvv output?
>
>AFAICS:
>
>* Ubuntu 5.10 is based on kernel 2.6.12.6
>* SiS 182 support was added in kernel 2.6.14
>
>Ben, any suggestion?
>
>Thanks,
>Bartlomiej
>
>
[-- Attachment #2: ubuntu_info.txt --]
[-- Type: text/plain, Size: 15700 bytes --]
Script started on Mon 23 Jan 2006 20:34:45 GMT
root@ubuntu:~#
root@ubuntu:~#
root@ubuntu:~#
root@ubuntu:~# lsmod | grep -i ata
root@ubuntu:~#
root@ubuntu:~#
root@ubuntu:~#
root@ubuntu:~# lsmod
Module Size Used by
rfcomm 34972 0
l2cap 22404 5 rfcomm
bluetooth 43012 4 rfcomm,l2cap
cpufreq_userspace 4444 0
cpufreq_stats 5124 0
freq_table 4484 1 cpufreq_stats
cpufreq_powersave 1920 0
cpufreq_ondemand 5916 0
cpufreq_conservative 6820 0
video 16004 0
tc1100_wmi 6916 0
sony_acpi 5516 0
pcc_acpi 11392 0
hotkey 9508 0
dev_acpi 11396 0
i2c_acpi_ec 5760 0
i2c_core 19728 1 i2c_acpi_ec
button 6672 0
battery 9604 0
container 4608 0
ac 4996 0
ipv6 217408 8
af_packet 20232 2
tsdev 7616 0
floppy 52692 0
pcspkr 3652 0
rtc 11832 0
snd_intel8x0 30144 0
snd_ac97_codec 72188 1 snd_intel8x0
snd_pcm_oss 46368 0
snd_mixer_oss 16128 1 snd_pcm_oss
snd_pcm 78344 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer 21764 1 snd_pcm
snd 48644 6 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 9184 1 snd
snd_page_alloc 10120 2 snd_intel8x0,snd_pcm
shpchp 80612 0
pci_hotplug 24628 1 shpchp
sis_agp 8452 1
agpgart 32328 1 sis_agp
dm_mod 50364 1
evdev 9088 0
psmouse 26116 0
mousedev 10912 0
parport_pc 31812 1
lp 11460 0
parport 32072 2 parport_pc,lp
md 40656 0
ext3 115976 1
jbd 48536 1 ext3
thermal 13192 0
processor 23100 1 thermal
fan 4740 0
usbhid 30688 0
3c59x 37544 0
mii 5248 1 3c59x
ehci_hcd 29448 0
ohci_hcd 18564 0
usbcore 104316 4 usbhid,ehci_hcd,ohci_hcd
ide_cd 36996 0
cdrom 33952 1 ide_cd
ide_disk 16128 3
ide_generic 1664 0
sis5513 14472 2
ide_core 125268 4 ide_cd,ide_disk,ide_generic,sis5513
unix 24624 64
vesafb 8088 0
capability 5000 0
commoncap 6784 1 capability
vga16fb 12232 1
vgastate 8320 1 vga16fb
softcursor 2432 2 vesafb,vga16fb
cfbimgblt 2944 2 vesafb,vga16fb
cfbfillrect 3840 2 vesafb,vga16fb
cfbcopyarea 4480 2 vesafb,vga16fb
fbcon 34176 72
tileblit 2560 1 fbcon
font 8448 1 fbcon
bitblit 5248 1 fbcon
root@ubuntu:~#
root@ubuntu:~#
root@ubuntu:~#
root@ubuntu:~#
root@ubuntu:~#
root@ubuntu:~# tail -2 /var/log/messages
Jan 23 20:34:18 localhost kernel: [4294755.955000] Bluetooth: RFCOMM socket layer initialized
Jan 23 20:34:18 localhost kernel: [4294755.955000] Bluetooth: RFCOMM TTY layer initialized
root@ubuntu:~# date
Mon Jan 23 20:35:51 GMT 2006
root@ubuntu:~# locate sata_sis
/lib/modules/2.6.12-9-386/kernel/drivers/scsi/sata_sis.ko
/lib/modules/2.6.12-10-386/kernel/drivers/scsi/sata_sis.ko
/usr/src/kernel-source-2.6.11/drivers/scsi/sata_sis.c
/home/chris/Desktop/sis18x_2.6.10_1.00.00/sata_sis.c
root@ubuntu:~#
root@ubuntu:~#
root@ubuntu:~#
root@ubuntu:~# modprobe sata_sis
root@ubuntu:~#
root@ubuntu:~#
root@ubuntu:~#
root@ubuntu:~# tail -2 /var/log/messages
Jan 23 20:34:18 localhost kernel: [4294755.955000] Bluetooth: RFCOMM TTY layer initialized
Jan 23 20:36:35 localhost kernel: [4294892.460000] SCSI subsystem initialized
root@ubuntu:~#
root@ubuntu:~#
root@ubuntu:~#
root@ubuntu:~#
root@ubuntu:~#
root@ubuntu:~# lsmod | grep -i ata
sata_sis 7552 0
libata 47876 1 sata_sis
scsi_mod 124872 1 libata
root@ubuntu:~#
root@ubuntu:~#
root@ubuntu:~#
root@ubuntu:~#
root@ubuntu:~#
root@ubuntu:~# ls -l /dev/sd*
ls: /dev/sd*: No such file or directory
root@ubuntu:~#
root@ubuntu:~#
root@ubuntu:~#
root@ubuntu:~#
root@ubuntu:~#
root@ubuntu:~#
root@ubuntu:~# cat /proc/version
Linux version 2.6.12-10-386 (buildd@rothera) (gcc version 3.4.5 20050809 (prerelease) (Ubuntu 3.4.4-6ubuntu8)) #1 Mon Jan 16 17:18:08 UTC 2006
root@ubuntu:~#
root@ubuntu:~#
root@ubuntu:~#
root@ubuntu:~#
root@ubuntu:~#
root@ubuntu:~#
root@ubuntu:~#
root@ubuntu:~# lspci -vvv
0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] 760/M760 Host (rev 03)
Subsystem: Asustek Computer, Inc.: Unknown device 8159
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 64
Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: [a0] AGP version 3.0
Status: RQ=32 Iso- ArqSz=2 Cal=3 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3+ Rate=x4,x8
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none>
Capabilities: [d0] #08 [0120]
Capabilities: [f0] #08 [8000]
0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SG86C202 (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fbf00000-fbffffff
Prefetchable memory behind bridge: e8000000-f3ffffff
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS965 [MuTIOL Media IO] (rev 48)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01) (prog-if 80 [Master])
Subsystem: Asustek Computer, Inc.: Unknown device 8139
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 128
Region 0: I/O ports at <unassigned>
Region 1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at ffa0 [size=16]
Capabilities: [58] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0)
Subsystem: Asustek Computer, Inc.: Unknown device 810d
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (13000ns min, 2750ns max)
Interrupt: pin C routed to IRQ 18
Region 0: I/O ports at b800 [size=256]
Region 1: I/O ports at b400 [size=128]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (20000ns max)
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fbefc000 (32-bit, non-prefetchable) [size=4K]
0000:00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (20000ns max)
Interrupt: pin B routed to IRQ 21
Region 0: Memory at fbefd000 (32-bit, non-prefetchable) [size=4K]
0000:00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (20000ns max)
Interrupt: pin C routed to IRQ 22
Region 0: Memory at fbefe000 (32-bit, non-prefetchable) [size=4K]
0000:00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller (prog-if 20 [EHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 8139
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (20000ns max)
Interrupt: pin D routed to IRQ 23
Region 0: Memory at fbeff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:04.0 Ethernet controller: Silicon Integrated Systems [SiS]: Unknown device 0190
Subsystem: Asustek Computer, Inc.: Unknown device 8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 5
Region 0: Memory at fbefbc00 (32-bit, non-prefetchable) [size=128]
Region 1: I/O ports at b000 [size=128]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
0000:00:05.0 IDE interface: Silicon Integrated Systems [SiS]: Unknown device 0182 (rev 01) (prog-if 85 [Master SecO PriO])
Subsystem: Asustek Computer, Inc.: Unknown device 8139
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at a800 [size=8]
Region 1: I/O ports at a400 [size=4]
Region 2: I/O ports at a000 [size=8]
Region 3: I/O ports at 9800 [size=4]
Region 4: I/O ports at 9400 [size=16]
Region 5: I/O ports at 9000 [size=128]
Capabilities: [58] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:06.0 PCI bridge: Silicon Integrated Systems [SiS]: Unknown device 000a (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 0x10 (64 bytes)
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [f4] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:07.0 PCI bridge: Silicon Integrated Systems [SiS]: Unknown device 000a (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 0x10 (64 bytes)
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [f4] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:09.0 Ethernet controller: 3Com Corporation 3c905 100BaseTX [Boomerang]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (750ns min, 2000ns max)
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 8800 [size=64]
Expansion ROM at fbee0000 [disabled] [size=64K]
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Capabilities: [80] #08 [2101]
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
0000:01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 661FX/M661FX/M661MX/741/M741/760/M760 PCI/AGP (prog-if 00 [VGA])
Subsystem: Asustek Computer, Inc.: Unknown device 8159
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
BIST result: 00
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at fbfe0000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at c800 [size=128]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] AGP version 3.0
Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3+ Rate=x4,x8
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
root@ubuntu:~#
root@ubuntu:~#
root@ubuntu:~#
root@ubuntu:~#
root@ubuntu:~#
root@ubuntu:~#
root@ubuntu:~#
Script done on Mon 23 Jan 2006 20:39:43 GMT
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: sata_sis on Ubuntu 5.10
2006-01-23 20:55 ` Chris Bamford
@ 2006-01-23 21:15 ` Uwe Koziolek
2006-01-24 9:06 ` Chris Bamford
0 siblings, 1 reply; 5+ messages in thread
From: Uwe Koziolek @ 2006-01-23 21:15 UTC (permalink / raw)
To: Chris Bamford; +Cc: Bartlomiej Zolnierkiewicz, bcollins, linux-ide, touch
Hello Chris,
please try the live-CD Kanotix 2005-04 (http://kanotix.com). This CD
includes the actual sata_sis driver.
It is Debian based. I have tested the sata_sis driver using this CD.
regards
Uwe Koziolek
Chris Bamford schrieb:
> Hi Bartlomiej,
>
> Thanks for the response! I attach a file containing (I hope) all the
> answers to your questions.
> Please shout if you need more.
>
> Thanks,
>
> - Chris
>
> Bartlomiej Zolnierkiewicz wrote:
>
>> On 1/22/06, Chris Bamford <chris@bammers.net> wrote:
>>
>>
>>> Hi Uwe,
>>>
>>> I have been unsuccessfully trying to get Linux to work with my SATA
>>> disk
>>> on my ASUS Vintage AE-1 barebone machine.
>>>
>>> I have posted to the ASUS support site (see
>>> http://vip.asus.com/eservice/techmailstatus.aspx?ID=WTM200601212130302557),
>>>
>>> and am still waiting for a reply.
>>> For more background on the problem, please see the attached message
>>> which I sent to the ubuntu-users mailing list - which did not produce
>>> any answers.
>>>
>>
>>
>> Thread is here:
>> https://lists.ubuntu.com/archives/ubuntu-users/2006-January/063781.html
>>
>>
>>
>>> The BIOS can see the SATA disk, but Linux does not!
>>> If I type "lsmod | grep -i ata" it returns nothing (no 'ata' drivers
>>> loaded). If I type 'locate sata_sis', it finds 2 copies, so I assume it
>>> should be OK if I load the drivers with modprobe:
>>>
>>> mobprobe sat_sis
>>> modprobe ata
>>>
>>> "lsmod | grep -i ata" now shows them loaded, but what do I do next?
>>> the
>>> devices /dev/sd* are not present, so I cannot access the disk. Am I
>>> missing a step?
>>>
>>
>>
>> Don't know, you didn't send output of lsmod command.
>>
>> Does loading sata_sis module produces any messages?
>>
>>
>>
>>> I tried to build the driver from the sources provided on the CD with
>>> the
>>> machine, but it would not build (filesystem layout differences between
>>> Fedora and Debian??).
>>>
>>> Anyway, please help!
>>>
>>> Any pointers/info/etc would be gratefully received.
>>>
>>
>>
>> What kernel version are you using?
>> What is the lspci -vvv output?
>>
>> AFAICS:
>>
>> * Ubuntu 5.10 is based on kernel 2.6.12.6
>> * SiS 182 support was added in kernel 2.6.14
>>
>> Ben, any suggestion?
>>
>> Thanks,
>> Bartlomiej
>>
>>
>
>------------------------------------------------------------------------
>
>Script started on Mon 23 Jan 2006 20:34:45 GMT
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~# lsmod | grep -i ata
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~# lsmod
>Module Size Used by
>rfcomm 34972 0
>l2cap 22404 5 rfcomm
>bluetooth 43012 4 rfcomm,l2cap
>cpufreq_userspace 4444 0
>cpufreq_stats 5124 0
>freq_table 4484 1 cpufreq_stats
>cpufreq_powersave 1920 0
>cpufreq_ondemand 5916 0
>cpufreq_conservative 6820 0
>video 16004 0
>tc1100_wmi 6916 0
>sony_acpi 5516 0
>pcc_acpi 11392 0
>hotkey 9508 0
>dev_acpi 11396 0
>i2c_acpi_ec 5760 0
>i2c_core 19728 1 i2c_acpi_ec
>button 6672 0
>battery 9604 0
>container 4608 0
>ac 4996 0
>ipv6 217408 8
>af_packet 20232 2
>tsdev 7616 0
>floppy 52692 0
>pcspkr 3652 0
>rtc 11832 0
>snd_intel8x0 30144 0
>snd_ac97_codec 72188 1 snd_intel8x0
>snd_pcm_oss 46368 0
>snd_mixer_oss 16128 1 snd_pcm_oss
>snd_pcm 78344 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
>snd_timer 21764 1 snd_pcm
>snd 48644 6 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
>soundcore 9184 1 snd
>snd_page_alloc 10120 2 snd_intel8x0,snd_pcm
>shpchp 80612 0
>pci_hotplug 24628 1 shpchp
>sis_agp 8452 1
>agpgart 32328 1 sis_agp
>dm_mod 50364 1
>evdev 9088 0
>psmouse 26116 0
>mousedev 10912 0
>parport_pc 31812 1
>lp 11460 0
>parport 32072 2 parport_pc,lp
>md 40656 0
>ext3 115976 1
>jbd 48536 1 ext3
>thermal 13192 0
>processor 23100 1 thermal
>fan 4740 0
>usbhid 30688 0
>3c59x 37544 0
>mii 5248 1 3c59x
>ehci_hcd 29448 0
>ohci_hcd 18564 0
>usbcore 104316 4 usbhid,ehci_hcd,ohci_hcd
>ide_cd 36996 0
>cdrom 33952 1 ide_cd
>ide_disk 16128 3
>ide_generic 1664 0
>sis5513 14472 2
>ide_core 125268 4 ide_cd,ide_disk,ide_generic,sis5513
>unix 24624 64
>vesafb 8088 0
>capability 5000 0
>commoncap 6784 1 capability
>vga16fb 12232 1
>vgastate 8320 1 vga16fb
>softcursor 2432 2 vesafb,vga16fb
>cfbimgblt 2944 2 vesafb,vga16fb
>cfbfillrect 3840 2 vesafb,vga16fb
>cfbcopyarea 4480 2 vesafb,vga16fb
>fbcon 34176 72
>tileblit 2560 1 fbcon
>font 8448 1 fbcon
>bitblit 5248 1 fbcon
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~# tail -2 /var/log/messages
>Jan 23 20:34:18 localhost kernel: [4294755.955000] Bluetooth: RFCOMM socket layer initialized
>Jan 23 20:34:18 localhost kernel: [4294755.955000] Bluetooth: RFCOMM TTY layer initialized
>root@ubuntu:~# date
>Mon Jan 23 20:35:51 GMT 2006
>root@ubuntu:~# locate sata_sis
>/lib/modules/2.6.12-9-386/kernel/drivers/scsi/sata_sis.ko
>/lib/modules/2.6.12-10-386/kernel/drivers/scsi/sata_sis.ko
>/usr/src/kernel-source-2.6.11/drivers/scsi/sata_sis.c
>/home/chris/Desktop/sis18x_2.6.10_1.00.00/sata_sis.c
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~# modprobe sata_sis
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~# tail -2 /var/log/messages
>Jan 23 20:34:18 localhost kernel: [4294755.955000] Bluetooth: RFCOMM TTY layer initialized
>Jan 23 20:36:35 localhost kernel: [4294892.460000] SCSI subsystem initialized
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~# lsmod | grep -i ata
>sata_sis 7552 0
>libata 47876 1 sata_sis
>scsi_mod 124872 1 libata
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~# ls -l /dev/sd*
>ls: /dev/sd*: No such file or directory
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~# cat /proc/version
>Linux version 2.6.12-10-386 (buildd@rothera) (gcc version 3.4.5 20050809 (prerelease) (Ubuntu 3.4.4-6ubuntu8)) #1 Mon Jan 16 17:18:08 UTC 2006
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~# lspci -vvv
>0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] 760/M760 Host (rev 03)
> Subsystem: Asustek Computer, Inc.: Unknown device 8159
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
> Latency: 64
> Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=64M]
> Capabilities: [a0] AGP version 3.0
> Status: RQ=32 Iso- ArqSz=2 Cal=3 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3+ Rate=x4,x8
> Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none>
> Capabilities: [d0] #08 [0120]
> Capabilities: [f0] #08 [8000]
>
>0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SG86C202 (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
> I/O behind bridge: 0000c000-0000cfff
> Memory behind bridge: fbf00000-fbffffff
> Prefetchable memory behind bridge: e8000000-f3ffffff
> BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
>
>0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS965 [MuTIOL Media IO] (rev 48)
> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
>
>0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01) (prog-if 80 [Master])
> Subsystem: Asustek Computer, Inc.: Unknown device 8139
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 128
> Region 0: I/O ports at <unassigned>
> Region 1: I/O ports at <unassigned>
> Region 2: I/O ports at <unassigned>
> Region 3: I/O ports at <unassigned>
> Region 4: I/O ports at ffa0 [size=16]
> Capabilities: [58] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0)
> Subsystem: Asustek Computer, Inc.: Unknown device 810d
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (13000ns min, 2750ns max)
> Interrupt: pin C routed to IRQ 18
> Region 0: I/O ports at b800 [size=256]
> Region 1: I/O ports at b400 [size=128]
> Capabilities: [48] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>0000:00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
> Subsystem: Asustek Computer, Inc.: Unknown device 8139
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (20000ns max)
> Interrupt: pin A routed to IRQ 20
> Region 0: Memory at fbefc000 (32-bit, non-prefetchable) [size=4K]
>
>0000:00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
> Subsystem: Asustek Computer, Inc.: Unknown device 8139
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (20000ns max)
> Interrupt: pin B routed to IRQ 21
> Region 0: Memory at fbefd000 (32-bit, non-prefetchable) [size=4K]
>
>0000:00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
> Subsystem: Asustek Computer, Inc.: Unknown device 8139
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (20000ns max)
> Interrupt: pin C routed to IRQ 22
> Region 0: Memory at fbefe000 (32-bit, non-prefetchable) [size=4K]
>
>0000:00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller (prog-if 20 [EHCI])
> Subsystem: Asustek Computer, Inc.: Unknown device 8139
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (20000ns max)
> Interrupt: pin D routed to IRQ 23
> Region 0: Memory at fbeff000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>0000:00:04.0 Ethernet controller: Silicon Integrated Systems [SiS]: Unknown device 0190
> Subsystem: Asustek Computer, Inc.: Unknown device 8139
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Interrupt: pin A routed to IRQ 5
> Region 0: Memory at fbefbc00 (32-bit, non-prefetchable) [size=128]
> Region 1: I/O ports at b000 [size=128]
> Capabilities: [40] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
>
>0000:00:05.0 IDE interface: Silicon Integrated Systems [SiS]: Unknown device 0182 (rev 01) (prog-if 85 [Master SecO PriO])
> Subsystem: Asustek Computer, Inc.: Unknown device 8139
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64
> Interrupt: pin A routed to IRQ 10
> Region 0: I/O ports at a800 [size=8]
> Region 1: I/O ports at a400 [size=4]
> Region 2: I/O ports at a000 [size=8]
> Region 3: I/O ports at 9800 [size=4]
> Region 4: I/O ports at 9400 [size=16]
> Region 5: I/O ports at 9000 [size=128]
> Capabilities: [58] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>0000:00:06.0 PCI bridge: Silicon Integrated Systems [SiS]: Unknown device 000a (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0, Cache Line Size: 0x10 (64 bytes)
> Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
> I/O behind bridge: 0000d000-0000dfff
> Memory behind bridge: fff00000-000fffff
> Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
> BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
> Capabilities: [f4] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>0000:00:07.0 PCI bridge: Silicon Integrated Systems [SiS]: Unknown device 000a (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0, Cache Line Size: 0x10 (64 bytes)
> Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
> I/O behind bridge: 0000e000-0000efff
> Memory behind bridge: fff00000-000fffff
> Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
> BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
> Capabilities: [f4] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>0000:00:09.0 Ethernet controller: 3Com Corporation 3c905 100BaseTX [Boomerang]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (750ns min, 2000ns max)
> Interrupt: pin A routed to IRQ 16
> Region 0: I/O ports at 8800 [size=64]
> Expansion ROM at fbee0000 [disabled] [size=64K]
>
>0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Capabilities: [80] #08 [2101]
>
>0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>0000:01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 661FX/M661FX/M661MX/741/M741/760/M760 PCI/AGP (prog-if 00 [VGA])
> Subsystem: Asustek Computer, Inc.: Unknown device 8159
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> BIST result: 00
> Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
> Region 1: Memory at fbfe0000 (32-bit, non-prefetchable) [size=128K]
> Region 2: I/O ports at c800 [size=128]
> Capabilities: [40] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [50] AGP version 3.0
> Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3+ Rate=x4,x8
> Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
>
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>Script done on Mon 23 Jan 2006 20:39:43 GMT
>
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: sata_sis on Ubuntu 5.10
2006-01-23 21:15 ` Uwe Koziolek
@ 2006-01-24 9:06 ` Chris Bamford
0 siblings, 0 replies; 5+ messages in thread
From: Chris Bamford @ 2006-01-24 9:06 UTC (permalink / raw)
To: Uwe Koziolek; +Cc: Bartlomiej Zolnierkiewicz, bcollins, linux-ide, touch
Hi Uwe,
Wow! I can see my disk as /dev/sd* using the Kanotix live-CD. Thanks !
OK, now what next? Should I copy the sata_sis.ko driver off there and
put it on my Ubuntu system? If so, where should it go? Is there
anything else I need to do?
Thanks again.
- Chris
Uwe Koziolek wrote:
>Hello Chris,
>
>please try the live-CD Kanotix 2005-04 (http://kanotix.com). This CD
>includes the actual sata_sis driver.
>It is Debian based. I have tested the sata_sis driver using this CD.
>
>regards
>Uwe Koziolek
>
>
>
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2006-01-24 9:06 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-01-22 20:55 sata_sis on Ubuntu 5.10 Chris Bamford
2006-01-23 13:47 ` Bartlomiej Zolnierkiewicz
2006-01-23 20:55 ` Chris Bamford
2006-01-23 21:15 ` Uwe Koziolek
2006-01-24 9:06 ` Chris Bamford
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).