From: Uwe Koziolek <uwe.koziolek@gmx.net>
To: Chris Bamford <chris@bammers.net>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>,
bcollins@ubuntu.com, linux-ide@vger.kernel.org, touch@sis.com
Subject: Re: sata_sis on Ubuntu 5.10
Date: Mon, 23 Jan 2006 22:15:08 +0100 [thread overview]
Message-ID: <43D5475C.1030007@gmx.net> (raw)
In-Reply-To: <43D542AD.40905@bammers.net>
Hello Chris,
please try the live-CD Kanotix 2005-04 (http://kanotix.com). This CD
includes the actual sata_sis driver.
It is Debian based. I have tested the sata_sis driver using this CD.
regards
Uwe Koziolek
Chris Bamford schrieb:
> Hi Bartlomiej,
>
> Thanks for the response! I attach a file containing (I hope) all the
> answers to your questions.
> Please shout if you need more.
>
> Thanks,
>
> - Chris
>
> Bartlomiej Zolnierkiewicz wrote:
>
>> On 1/22/06, Chris Bamford <chris@bammers.net> wrote:
>>
>>
>>> Hi Uwe,
>>>
>>> I have been unsuccessfully trying to get Linux to work with my SATA
>>> disk
>>> on my ASUS Vintage AE-1 barebone machine.
>>>
>>> I have posted to the ASUS support site (see
>>> http://vip.asus.com/eservice/techmailstatus.aspx?ID=WTM200601212130302557),
>>>
>>> and am still waiting for a reply.
>>> For more background on the problem, please see the attached message
>>> which I sent to the ubuntu-users mailing list - which did not produce
>>> any answers.
>>>
>>
>>
>> Thread is here:
>> https://lists.ubuntu.com/archives/ubuntu-users/2006-January/063781.html
>>
>>
>>
>>> The BIOS can see the SATA disk, but Linux does not!
>>> If I type "lsmod | grep -i ata" it returns nothing (no 'ata' drivers
>>> loaded). If I type 'locate sata_sis', it finds 2 copies, so I assume it
>>> should be OK if I load the drivers with modprobe:
>>>
>>> mobprobe sat_sis
>>> modprobe ata
>>>
>>> "lsmod | grep -i ata" now shows them loaded, but what do I do next?
>>> the
>>> devices /dev/sd* are not present, so I cannot access the disk. Am I
>>> missing a step?
>>>
>>
>>
>> Don't know, you didn't send output of lsmod command.
>>
>> Does loading sata_sis module produces any messages?
>>
>>
>>
>>> I tried to build the driver from the sources provided on the CD with
>>> the
>>> machine, but it would not build (filesystem layout differences between
>>> Fedora and Debian??).
>>>
>>> Anyway, please help!
>>>
>>> Any pointers/info/etc would be gratefully received.
>>>
>>
>>
>> What kernel version are you using?
>> What is the lspci -vvv output?
>>
>> AFAICS:
>>
>> * Ubuntu 5.10 is based on kernel 2.6.12.6
>> * SiS 182 support was added in kernel 2.6.14
>>
>> Ben, any suggestion?
>>
>> Thanks,
>> Bartlomiej
>>
>>
>
>------------------------------------------------------------------------
>
>Script started on Mon 23 Jan 2006 20:34:45 GMT
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~# lsmod | grep -i ata
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~# lsmod
>Module Size Used by
>rfcomm 34972 0
>l2cap 22404 5 rfcomm
>bluetooth 43012 4 rfcomm,l2cap
>cpufreq_userspace 4444 0
>cpufreq_stats 5124 0
>freq_table 4484 1 cpufreq_stats
>cpufreq_powersave 1920 0
>cpufreq_ondemand 5916 0
>cpufreq_conservative 6820 0
>video 16004 0
>tc1100_wmi 6916 0
>sony_acpi 5516 0
>pcc_acpi 11392 0
>hotkey 9508 0
>dev_acpi 11396 0
>i2c_acpi_ec 5760 0
>i2c_core 19728 1 i2c_acpi_ec
>button 6672 0
>battery 9604 0
>container 4608 0
>ac 4996 0
>ipv6 217408 8
>af_packet 20232 2
>tsdev 7616 0
>floppy 52692 0
>pcspkr 3652 0
>rtc 11832 0
>snd_intel8x0 30144 0
>snd_ac97_codec 72188 1 snd_intel8x0
>snd_pcm_oss 46368 0
>snd_mixer_oss 16128 1 snd_pcm_oss
>snd_pcm 78344 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
>snd_timer 21764 1 snd_pcm
>snd 48644 6 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
>soundcore 9184 1 snd
>snd_page_alloc 10120 2 snd_intel8x0,snd_pcm
>shpchp 80612 0
>pci_hotplug 24628 1 shpchp
>sis_agp 8452 1
>agpgart 32328 1 sis_agp
>dm_mod 50364 1
>evdev 9088 0
>psmouse 26116 0
>mousedev 10912 0
>parport_pc 31812 1
>lp 11460 0
>parport 32072 2 parport_pc,lp
>md 40656 0
>ext3 115976 1
>jbd 48536 1 ext3
>thermal 13192 0
>processor 23100 1 thermal
>fan 4740 0
>usbhid 30688 0
>3c59x 37544 0
>mii 5248 1 3c59x
>ehci_hcd 29448 0
>ohci_hcd 18564 0
>usbcore 104316 4 usbhid,ehci_hcd,ohci_hcd
>ide_cd 36996 0
>cdrom 33952 1 ide_cd
>ide_disk 16128 3
>ide_generic 1664 0
>sis5513 14472 2
>ide_core 125268 4 ide_cd,ide_disk,ide_generic,sis5513
>unix 24624 64
>vesafb 8088 0
>capability 5000 0
>commoncap 6784 1 capability
>vga16fb 12232 1
>vgastate 8320 1 vga16fb
>softcursor 2432 2 vesafb,vga16fb
>cfbimgblt 2944 2 vesafb,vga16fb
>cfbfillrect 3840 2 vesafb,vga16fb
>cfbcopyarea 4480 2 vesafb,vga16fb
>fbcon 34176 72
>tileblit 2560 1 fbcon
>font 8448 1 fbcon
>bitblit 5248 1 fbcon
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~# tail -2 /var/log/messages
>Jan 23 20:34:18 localhost kernel: [4294755.955000] Bluetooth: RFCOMM socket layer initialized
>Jan 23 20:34:18 localhost kernel: [4294755.955000] Bluetooth: RFCOMM TTY layer initialized
>root@ubuntu:~# date
>Mon Jan 23 20:35:51 GMT 2006
>root@ubuntu:~# locate sata_sis
>/lib/modules/2.6.12-9-386/kernel/drivers/scsi/sata_sis.ko
>/lib/modules/2.6.12-10-386/kernel/drivers/scsi/sata_sis.ko
>/usr/src/kernel-source-2.6.11/drivers/scsi/sata_sis.c
>/home/chris/Desktop/sis18x_2.6.10_1.00.00/sata_sis.c
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~# modprobe sata_sis
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~# tail -2 /var/log/messages
>Jan 23 20:34:18 localhost kernel: [4294755.955000] Bluetooth: RFCOMM TTY layer initialized
>Jan 23 20:36:35 localhost kernel: [4294892.460000] SCSI subsystem initialized
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~# lsmod | grep -i ata
>sata_sis 7552 0
>libata 47876 1 sata_sis
>scsi_mod 124872 1 libata
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~# ls -l /dev/sd*
>ls: /dev/sd*: No such file or directory
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~# cat /proc/version
>Linux version 2.6.12-10-386 (buildd@rothera) (gcc version 3.4.5 20050809 (prerelease) (Ubuntu 3.4.4-6ubuntu8)) #1 Mon Jan 16 17:18:08 UTC 2006
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~# lspci -vvv
>0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] 760/M760 Host (rev 03)
> Subsystem: Asustek Computer, Inc.: Unknown device 8159
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
> Latency: 64
> Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=64M]
> Capabilities: [a0] AGP version 3.0
> Status: RQ=32 Iso- ArqSz=2 Cal=3 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3+ Rate=x4,x8
> Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none>
> Capabilities: [d0] #08 [0120]
> Capabilities: [f0] #08 [8000]
>
>0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SG86C202 (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
> I/O behind bridge: 0000c000-0000cfff
> Memory behind bridge: fbf00000-fbffffff
> Prefetchable memory behind bridge: e8000000-f3ffffff
> BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
>
>0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS965 [MuTIOL Media IO] (rev 48)
> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
>
>0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01) (prog-if 80 [Master])
> Subsystem: Asustek Computer, Inc.: Unknown device 8139
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 128
> Region 0: I/O ports at <unassigned>
> Region 1: I/O ports at <unassigned>
> Region 2: I/O ports at <unassigned>
> Region 3: I/O ports at <unassigned>
> Region 4: I/O ports at ffa0 [size=16]
> Capabilities: [58] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0)
> Subsystem: Asustek Computer, Inc.: Unknown device 810d
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (13000ns min, 2750ns max)
> Interrupt: pin C routed to IRQ 18
> Region 0: I/O ports at b800 [size=256]
> Region 1: I/O ports at b400 [size=128]
> Capabilities: [48] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>0000:00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
> Subsystem: Asustek Computer, Inc.: Unknown device 8139
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (20000ns max)
> Interrupt: pin A routed to IRQ 20
> Region 0: Memory at fbefc000 (32-bit, non-prefetchable) [size=4K]
>
>0000:00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
> Subsystem: Asustek Computer, Inc.: Unknown device 8139
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (20000ns max)
> Interrupt: pin B routed to IRQ 21
> Region 0: Memory at fbefd000 (32-bit, non-prefetchable) [size=4K]
>
>0000:00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
> Subsystem: Asustek Computer, Inc.: Unknown device 8139
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (20000ns max)
> Interrupt: pin C routed to IRQ 22
> Region 0: Memory at fbefe000 (32-bit, non-prefetchable) [size=4K]
>
>0000:00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller (prog-if 20 [EHCI])
> Subsystem: Asustek Computer, Inc.: Unknown device 8139
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (20000ns max)
> Interrupt: pin D routed to IRQ 23
> Region 0: Memory at fbeff000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>0000:00:04.0 Ethernet controller: Silicon Integrated Systems [SiS]: Unknown device 0190
> Subsystem: Asustek Computer, Inc.: Unknown device 8139
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Interrupt: pin A routed to IRQ 5
> Region 0: Memory at fbefbc00 (32-bit, non-prefetchable) [size=128]
> Region 1: I/O ports at b000 [size=128]
> Capabilities: [40] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
>
>0000:00:05.0 IDE interface: Silicon Integrated Systems [SiS]: Unknown device 0182 (rev 01) (prog-if 85 [Master SecO PriO])
> Subsystem: Asustek Computer, Inc.: Unknown device 8139
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64
> Interrupt: pin A routed to IRQ 10
> Region 0: I/O ports at a800 [size=8]
> Region 1: I/O ports at a400 [size=4]
> Region 2: I/O ports at a000 [size=8]
> Region 3: I/O ports at 9800 [size=4]
> Region 4: I/O ports at 9400 [size=16]
> Region 5: I/O ports at 9000 [size=128]
> Capabilities: [58] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>0000:00:06.0 PCI bridge: Silicon Integrated Systems [SiS]: Unknown device 000a (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0, Cache Line Size: 0x10 (64 bytes)
> Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
> I/O behind bridge: 0000d000-0000dfff
> Memory behind bridge: fff00000-000fffff
> Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
> BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
> Capabilities: [f4] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>0000:00:07.0 PCI bridge: Silicon Integrated Systems [SiS]: Unknown device 000a (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0, Cache Line Size: 0x10 (64 bytes)
> Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
> I/O behind bridge: 0000e000-0000efff
> Memory behind bridge: fff00000-000fffff
> Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
> BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
> Capabilities: [f4] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>0000:00:09.0 Ethernet controller: 3Com Corporation 3c905 100BaseTX [Boomerang]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (750ns min, 2000ns max)
> Interrupt: pin A routed to IRQ 16
> Region 0: I/O ports at 8800 [size=64]
> Expansion ROM at fbee0000 [disabled] [size=64K]
>
>0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Capabilities: [80] #08 [2101]
>
>0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>0000:01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 661FX/M661FX/M661MX/741/M741/760/M760 PCI/AGP (prog-if 00 [VGA])
> Subsystem: Asustek Computer, Inc.: Unknown device 8159
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> BIST result: 00
> Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
> Region 1: Memory at fbfe0000 (32-bit, non-prefetchable) [size=128K]
> Region 2: I/O ports at c800 [size=128]
> Capabilities: [40] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [50] AGP version 3.0
> Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3+ Rate=x4,x8
> Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
>
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>root@ubuntu:~#
>Script done on Mon 23 Jan 2006 20:39:43 GMT
>
>
next prev parent reply other threads:[~2006-01-23 21:12 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-01-22 20:55 sata_sis on Ubuntu 5.10 Chris Bamford
2006-01-23 13:47 ` Bartlomiej Zolnierkiewicz
2006-01-23 20:55 ` Chris Bamford
2006-01-23 21:15 ` Uwe Koziolek [this message]
2006-01-24 9:06 ` Chris Bamford
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=43D5475C.1030007@gmx.net \
--to=uwe.koziolek@gmx.net \
--cc=bcollins@ubuntu.com \
--cc=bzolnier@gmail.com \
--cc=chris@bammers.net \
--cc=linux-ide@vger.kernel.org \
--cc=touch@sis.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).