From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mogens Valentin Subject: Re: ATAPI works on via_sata, but only sort of. Date: Sun, 29 Jan 2006 18:43:11 +0100 Message-ID: <43DCFEAF.2010900@vip.cybercity.dk> References: <1138507667.9669.6.camel@localhost.localdomain> Reply-To: mogensv@vip.cybercity.dk Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from cicero0.cybercity.dk ([212.242.40.52]:33510 "EHLO cicero0.cybercity.dk") by vger.kernel.org with ESMTP id S1751085AbWA2Rlg (ORCPT ); Sun, 29 Jan 2006 12:41:36 -0500 In-Reply-To: <1138507667.9669.6.camel@localhost.localdomain> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Aaron Gyes Cc: linux-ide@vger.kernel.org Aaron Gyes wrote: > Hi, > > I recently tried out 2.6.16-rc1-mm3 to see if my Plextor PX716-SA would > magically come to life, it did. It had previously not worked in 2.6.15 > with the correct parameters being passed to libata. I can seem to read > CDs okay, however every single attempt at burning a CD thus far has > resulted in either a CD that doesn't work or a CD with CRC errors. Is > this expected/known? Can I do anything to fix it or help diagnose the > problem further? > > My motherboard is a Asus A8V, VIA K8T800Pro. An interesting question, since I'm just about buying a Shuttle SK21G with VIA K8T800CE chipset. http://linux.yyz.us/sata/sata-status.html#via: VIA SATA production. @Garzik: Does that mean all their chipsets, K8T800xx included? @Aaron: I guess you use SATA disk(s), no problems? Does the kernel boot with APIC enabled without problems? I know this has been a problem on at least some VIA chipsets. -- Kind regards, Mogens Valentin