From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jeff Garzik Subject: Re: SATA ATAPI AHCI error messages? Date: Tue, 07 Mar 2006 23:13:39 -0500 Message-ID: <440E59F3.6090200@garzik.org> References: <26CEE2C804D7BE47BC4686CDE863D0F50660ABA5@orsmsx410> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from mail.dvmed.net ([216.237.124.58]:18149 "EHLO mail.dvmed.net") by vger.kernel.org with ESMTP id S1751313AbWCHENt (ORCPT ); Tue, 7 Mar 2006 23:13:49 -0500 In-Reply-To: <26CEE2C804D7BE47BC4686CDE863D0F50660ABA5@orsmsx410> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: "Gaston, Jason D" Cc: linux-kernel@vger.kernel.org, "linux-ide@vger.kernel.org" Gaston, Jason D wrote: > Hello, > > We are seeing the following error messages in dmesg with the 2.6.16-rc5 > kernel. I have also tried to apply the git10 patch and still see the > same errors. This is seen using a Plextor PX-716SA or PX-712SA SATA > DVDRW drive when in AHCI mode. I do not see this message when the SATA > controller is set to IDE mode, in the BIOS. I have reproduced this > using Intel ICH6R, ICH7R and ICH8 SATA controllers. I have > atapi_enabled=1 set in the libata-core.c file. These error messages > continue to be repeatedly logged about every 2 seconds. Can someone > tell me what is going on and if this will be addressed in the next RC > release of the 2.6.16 kernel? > > ata2: translated ATA stat/err 0x51/24 to SCSI SK/ASC/ASCQ 0xb/00/00 > ata2: translated ATA stat/err 0x51/24 to SCSI SK/ASC/ASCQ 0xb/00/00 > ata2: translated ATA stat/err 0x51/24 to SCSI SK/ASC/ASCQ 0xb/00/00 > ata2: translated ATA stat/err 0x51/24 to SCSI SK/ASC/ASCQ 0xb/00/00 > ata2: translated ATA stat/err 0x51/24 to SCSI SK/ASC/ASCQ 0xb/00/00 > ata2: translated ATA stat/err 0x51/24 to SCSI SK/ASC/ASCQ 0xb/00/00 > ata2: translated ATA stat/err 0x51/24 to SCSI SK/ASC/ASCQ 0xb/00/00 > ata2: translated ATA stat/err 0x51/24 to SCSI SK/ASC/ASCQ 0xb/00/00 > sr0: CDROM (ioctl) error, command: <6>Test Unit Ready 00 00 00 00 00 00 > sr: Current [descriptor]: sense key: Aborted Command > Additional sense: No additional sense information Probably its just too chatty, since ATAPI throws a lot of errors... Jeff