From: Mark Lord <lkml@rtr.ca>
To: me_trash1@aon.at
Cc: linux-ide@vger.kernel.org, Jeff Garzik <jgarzik@pobox.com>
Subject: Re: LibPATA code issues / 2.6.15.4
Date: Wed, 15 Mar 2006 10:03:51 -0500 [thread overview]
Message-ID: <44182CD7.9070401@rtr.ca> (raw)
In-Reply-To: <1142344212.4416ca14a26b4@webmail.aon.at>
me_trash1@aon.at wrote:
> Hi!
>
> short:
> system with 2.6.15.4 with Mark Lord's opcode info patches
> sata_mv (Adaptec 1420SA Marvell 88SX6541)
> e.g. postgres:insert&delete gives: ata3: translated op=0x2a cmd=0x35 ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
> or sometimes (unknown cause):
> ata4: translated op=0x28 cmd=0x25 ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
> ata4: status=0xd0 { Busy }
> Assertion failed! ((readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS) >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) == pp->rsp_c
> onsumer,drivers/scsi/sata_mv.c,mv_get_crpb_status,line=1112
>
>
> long:
> I wanted to post this to the the thread "LibPATA code issues / 2.6.15.4".
> But right now my system is a bit down and so I sent this via webmail.
...
fyi:
ATA cmd=0x35 is ATA_CMD_WRITE_EXT, and 0x25 (lower down in the logs)
is ATA_CMD_READ_EXT.
Those are the bog-standard (and slow!) PIO R/W commands,
which generate one interrupt per 512-bytes transferred.
Cheers
next prev parent reply other threads:[~2006-03-15 15:03 UTC|newest]
Thread overview: 125+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-03-14 13:50 LibPATA code issues / 2.6.15.4 me_trash1
2006-03-15 15:03 ` Mark Lord [this message]
2006-03-16 10:08 ` Jens Axboe
2006-03-17 5:26 ` Mark Lord
2006-03-17 9:26 ` Albert Lee
2006-03-17 9:57 ` Jeff Garzik
2006-03-17 15:20 ` Eric D. Mudama
2006-03-17 15:20 ` Mark Lord
2006-03-17 15:29 ` Tejun Heo
2006-03-16 0:19 ` markus ebenhoeh
-- strict thread matches above, loose matches on Subject: below --
2006-03-01 19:00 Nicolas Mailhot
2006-03-01 19:22 ` Mark Lord
2006-03-01 23:12 ` Nicolas Mailhot
2006-03-01 23:31 ` Jeff Garzik
2006-03-02 1:19 ` Eric D. Mudama
2006-03-02 1:39 ` Eric D. Mudama
[not found] <Pine.LNX.4.64.0602140439580.3567@p34>
2006-02-14 14:50 ` Mark Lord
2006-02-14 16:27 ` David Greaves
2006-02-14 17:12 ` Justin Piszcz
2006-02-14 18:00 ` Mark Lord
2006-02-14 18:06 ` Justin Piszcz
2006-02-23 23:39 ` Justin Piszcz
2006-02-25 15:32 ` Mark Lord
2006-02-25 15:58 ` Justin Piszcz
2006-02-25 16:11 ` Jesper Juhl
2006-02-25 16:21 ` Mark Lord
2006-02-25 11:34 ` David Greaves
2006-02-25 16:20 ` Mark Lord
2006-02-25 17:45 ` Justin Piszcz
2006-02-25 18:28 ` Mark Lord
2006-02-25 18:55 ` Justin Piszcz
2006-02-25 19:29 ` Justin Piszcz
2006-02-25 19:53 ` David Greaves
2006-02-25 19:47 ` David Greaves
2006-02-26 2:27 ` Mark Lord
2006-02-26 9:56 ` David Greaves
2006-02-26 14:04 ` Mark Lord
2006-02-27 21:34 ` Mark Lord
2006-02-28 1:33 ` Tejun Heo
2006-02-28 1:46 ` Linus Torvalds
2006-02-28 2:07 ` Jeff Garzik
2006-02-28 2:14 ` Linus Torvalds
2006-02-28 2:52 ` Jeff Garzik
2006-02-28 3:36 ` Jeff Garzik
2006-02-28 4:11 ` Mark Lord
2006-02-28 10:30 ` Alan Cox
2006-02-28 8:03 ` Jens Axboe
2006-02-28 4:16 ` Mark Lord
2006-02-28 10:32 ` Alan Cox
2006-02-28 10:30 ` Justin Piszcz
2006-02-28 10:39 ` David Greaves
2006-02-28 14:37 ` Mark Lord
2006-02-28 21:04 ` Bill Davidsen
2006-03-08 2:57 ` Mark Lord
2006-03-08 3:18 ` Dave Jones
2006-03-08 3:23 ` Mark Lord
2006-03-08 15:37 ` Bill Davidsen
2006-02-28 14:38 ` Mark Lord
[not found] ` <Pine.LNX.4.64.0602280939280.16541@p34>
2006-02-28 14:49 ` Mark Lord
2006-02-28 15:07 ` Jeff Garzik
2006-02-28 15:26 ` Mark Lord
2006-02-28 15:33 ` Jeff Garzik
2006-03-01 0:46 ` Mark Lord
2006-03-01 6:01 ` Jeff Garzik
2006-02-28 15:16 ` Alan Cox
2006-03-01 17:33 ` David Greaves
2006-03-01 18:37 ` Alan Cox
2006-03-01 20:12 ` Phillip Susi
2006-03-08 16:46 ` Alan Cox
2006-02-28 15:31 ` Mark Lord
2006-02-28 15:34 ` Jeff Garzik
2006-02-28 16:57 ` Eric D. Mudama
2006-03-01 1:04 ` Mark Lord
2006-03-01 11:37 ` Justin Piszcz
2006-03-01 13:17 ` Justin Piszcz
2006-03-01 17:41 ` David Greaves
2006-03-01 17:46 ` Mark Lord
2006-03-01 18:12 ` David Greaves
2006-03-01 18:30 ` Mark Lord
2006-03-01 18:32 ` Justin Piszcz
2006-03-01 18:33 ` Justin Piszcz
2006-03-01 18:48 ` David Greaves
2006-03-01 19:49 ` David Greaves
2006-03-03 19:38 ` Justin Piszcz
2006-03-03 22:46 ` David Greaves
2006-03-04 14:25 ` Mark Lord
2006-03-06 6:13 ` David Greaves
2006-03-21 18:11 ` David Greaves
2006-03-22 15:23 ` David Greaves
2006-03-05 11:43 ` Justin Piszcz
2006-03-05 12:41 ` Justin Piszcz
2006-03-05 22:58 ` Mark Lord
2006-03-05 23:00 ` Mark Lord
2006-03-05 23:19 ` Justin Piszcz
2006-03-05 23:39 ` Jeff Garzik
2006-03-01 19:06 ` Justin Piszcz
2006-03-01 19:28 ` Mark Lord
2006-03-01 19:35 ` Mark Lord
2006-03-01 19:38 ` Justin Piszcz
2006-03-01 19:41 ` Jeff Garzik
2006-02-26 12:27 ` James Courtier-Dutton
2006-02-26 12:55 ` David Greaves
2006-02-26 13:56 ` Mark Lord
2006-02-14 23:58 ` Justin Piszcz
2006-02-17 8:45 ` Jeff Garzik
2006-02-17 14:59 ` Mark Lord
2006-02-17 15:00 ` Justin Piszcz
2006-02-18 20:43 ` Sander
2006-02-18 21:42 ` Mark Lord
2006-02-18 21:51 ` Justin Piszcz
2006-02-19 7:14 ` Sander
2006-02-19 15:30 ` Mark Lord
2006-02-19 17:16 ` Sander
2006-07-06 23:08 ` Justin Piszcz
2006-07-07 13:08 ` Mark Lord
2006-07-07 13:24 ` Justin Piszcz
2006-07-07 13:43 ` Mark Lord
2006-07-07 13:48 ` Justin Piszcz
2006-07-07 14:01 ` Justin Piszcz
2006-07-07 14:35 ` Justin Piszcz
2006-07-07 18:53 ` Justin Piszcz
2006-07-07 19:19 ` Jeff Garzik
2006-07-07 19:28 ` Justin Piszcz
[not found] ` <200607091224.31451.liml@rtr.ca>
2006-07-09 17:27 ` Justin Piszcz
2006-07-09 20:16 ` Justin Piszcz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=44182CD7.9070401@rtr.ca \
--to=lkml@rtr.ca \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
--cc=me_trash1@aon.at \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).