Re: [PATCH] 2.6.xx: sata_mv: another critical fix

[Mark Lord <lkml@rtr.ca>]

Sander wrote:
>
> I've applied the patch against 2.6.16-git4. I'm sorry to say the
> messages are still there:

That's okay.  I have an alternate theory about those messages,
to be addressed in a later patch.

> [ 1038.536894] kjournald starting.  Commit interval 5 seconds
> [ 1038.555040] EXT3 FS on md0, internal journal
> [ 1038.555072] EXT3-fs: mounted filesystem with writeback data mode.
> [ 1418.639290] ata11: status=0x50 { DriveReady SeekComplete }
> [ 1418.639356] ata11: error=0x50 { UncorrectableError SectorIdNotFound }
> [ 1418.639418] sdh: Current: sense key=0x0
> [ 1418.639448]     ASC=0x0 ASCQ=0x0
> [ 1418.639481] Info fld=0x505050
> [ 1684.727367] ata9: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
> [ 1684.727420] ata9: status=0xd0 { Busy }
> [ 2223.664107] ata6: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
> [ 2223.664162] ata6: status=0xd0 { Busy }
> [ 2381.589354] ata11: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
> [ 2381.589416] ata11: status=0xd0 { Busy }
> [ 2511.238690] ata9: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
> [ 2511.238753] ata9: status=0xd0 { Busy }
> [ 2990.792908] ata7: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
> [ 2990.792960] ata7: status=0xd0 { Busy }
> [ 4672.691569] ata8: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
> [ 4672.691623] ata8: status=0xd0 { Busy }
> [ 4988.884663] ata6: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
> [ 4988.884717] ata6: status=0xd0 { Busy }
> 
> Could the ata11/sdh message be bogus? I re-create the raid5 and fs every
> reboot.

Hard to tell.  It would be far more helpful if those messages included
info as to what was going on at the time.

Cheers