Re: Promise 20378

[Phil Dibowitz <phil@ipom.com>]

[-- Attachment #1: Type: text/plain, Size: 1829 bytes --]

I never saw a response to my email below. Any thoughts on this? Thanks.

Phil Dibowitz wrote:
> mreuther@umich.edu wrote:
> 
>>Phil, there is a patch in Jeff Garzik's libata-dev patch queue to support PATA
>>on Promise SATA hosts. I haven't tried it out myself, but it may cover your
>>case.
>>
>>Go to http://www.kernel.org/pub/linux/kernel/people/jgarzik/libata/ and grab the
>>latest patch for 2.4 or 2.6. If you grab 2.6.13-rc7-libata1.patch.bz2, it
>>applies cleanly to 2.6.13.
>>
>>Please report back the results!
> 
> 
> Finally got around to trying this. It works great! I patched 2.6.15.6
> with this patch, and everything seems to be fully functional as far as
> the PATA drive on that controller is concerned.
> 
> However, a few concerns:
> 
> 1. The kernel raid autodetection doesn't work here. Though I'm not clear
> if it supports going across controllers. I set up a raid-1 array wtih a
> drive on my other controller, set the partition type to autodetect, but
> a reboot left my array with just the drive not on the promise card.
> 
> 2. Currently my BIOS's ATA settings are "SATA mode" - I also have "PATA
> mode" "SATA+PATA mode". I tried SATA+PATA and I get a bunch of IRQ16
> ignored messages, a few tracebacks, and a LOT of slowness. I also get 3
> scsiI haven't tried the PATA mode.
> 
> Note that my box has 82801EB/ER controller which is currently my primary
> contoller as well as the Promise PDC20378 which is what I'm using this
> patch for.
> 
> Any help would be appreciated.
> 


-- 
Phil Dibowitz                             phil@ipom.com
Freeware and Technical Pages              Insanity Palace of Metallica
http://www.phildev.net/                   http://www.ipom.com/

"Be who you are and say what you feel, because those who mind don't
matter and those who matter don't mind."
 - Dr. Suess


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 256 bytes --]