From: Mark Lord <liml@rtr.ca>
To: Steven Scholz <steven.scholz@imc-berlin.de>
Cc: linux-ide@vger.kernel.org
Subject: Re: Problems with 1GB SimpleTech CF Card
Date: Wed, 24 May 2006 09:53:42 -0400 [thread overview]
Message-ID: <44746566.6040601@rtr.ca> (raw)
In-Reply-To: <447436B3.4090906@imc-berlin.de>
Steven Scholz wrote:
> Hi all,
>
> I get repeatable erros when accessing a 1GB SimpleTech CF Flash Card (SLCF1GBJ).
..
> ~ # hdparm -i /dev/hda
> Model=STI Flash 7.0.0, FwRev=05/03/04, SerialNo=STI J107004201112846
> Config={ HardSect NotMFM Removeable DTR>10Mbs nonMagnetic }
> RawCHS=2006/16/63, TrkSize=0, SectSize=0, ECCbytes=4
> BuffType=unknown, BuffSize=0kB, MaxMultSect=1, MultSect=off
> CurCHS=2006/16/63, CurSects=2022048, LBA=yes, LBAsects=2022048
> IORDY=no, tPIO={min:120,w/IORDY:120}
> PIO modes: pio0 pio1 pio2 pio3 pio4
> AdvancedPM=no WriteCache=enabled
>
> When doing "mke2fs /dev/hda1" after 30 seconds I get
>
> hda: irq timeout: status=0xd0 { Busy }
> ide: failed opcode was: unknown
> ide0: reset: master: error (0x00?)
Mmmm.. No idea, but one thing to try is "hdparm -W0" on the card,
and see if that makes any difference.
Cheers
next prev parent reply other threads:[~2006-05-24 13:53 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-05-24 10:34 Problems with 1GB SimpleTech CF Card Steven Scholz
2006-05-24 13:53 ` Mark Lord [this message]
2006-05-24 14:03 ` Steven Scholz
-- strict thread matches above, loose matches on Subject: below --
2006-05-24 12:28 Raphael Bossek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=44746566.6040601@rtr.ca \
--to=liml@rtr.ca \
--cc=linux-ide@vger.kernel.org \
--cc=steven.scholz@imc-berlin.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).