From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dario Oliva Subject: Re: Infinite loop on MODE-SENSE with a removable ATAPI sata device on VIA chipset Date: Mon, 12 Jun 2006 17:12:37 -0400 Message-ID: <448DD8C5.2010000@gmail.com> References: <4462E5A5.2010703@tw.ibm.com> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="------------070105020004030408060202" Return-path: Received: from py-out-1112.google.com ([64.233.166.178]:40574 "EHLO py-out-1112.google.com") by vger.kernel.org with ESMTP id S1751407AbWFLVMn (ORCPT ); Mon, 12 Jun 2006 17:12:43 -0400 Received: by py-out-1112.google.com with SMTP id x31so1806640pye for ; Mon, 12 Jun 2006 14:12:42 -0700 (PDT) In-Reply-To: <4462E5A5.2010703@tw.ibm.com> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: albertl@mail.com Cc: linux-ide@vger.kernel.org This is a multi-part message in MIME format. --------------070105020004030408060202 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Albert Lee wrote: > Dario Oliva wrote: > >> Attached are some kernel messeges. I ran dmesg several times and >> appended the output to the attached file, so there may be some >> redudancy. However some of the commands or debug lines do appear to >> repeat themselves. As you requested, I changed "#undef ATA_DEBUG" to >> "#define ATA_DEBUG". >> >> As far as the device is concerned, is an unreleased product of the >> company I work for. That's why I did not give a name, because we don't >> have an official name yet. But like I said, it is SATA, removalbe ATAPI. >> If you want/need more information let me know. >> > > Is the ATAPI device native SATA or PATA with some bridge chip used? > >> From the log, some MODE SENSE did work at first: (So, seems not >> DMADIR problem.) > > ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 3f 00 00 00 00 00 08 > ata_sg_setup: 1 sg elements mapped > ata_exec_command_pio: ata1: cmd 0xA0 > atapi_packet_task: busy wait > atapi_packet_task: send cdb > ata_host_intr: ata1: protocol 7 (dev_stat 0x50) <= irq received. > ATAPI DMA ok > sda: Write Protect is off > > =============================================================== > > Later, irq lost for the following MODE SENSE command: > > ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 08 00 00 00 00 00 1c > ata_sg_setup: 1 sg elements mapped > ata_exec_command_pio: ata1: cmd 0xA0 > atapi_packet_task: busy wait > atapi_packet_task: send cdb > ata_scsi_error: ENTER <= timeout. ata_eng_timeout: ENTER > ata_qc_timeout: ENTER > ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x1 <= device is > still busy. The old EH doesn't reset the device. > ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 > ata_qc_timeout: EXIT > ata_eng_timeout: EXIT > ata_scsi_error: EXIT > ==================================================================== > > After the timeout, the device is in BUSY state and can't handle any > new commands. > That's why the "infinite loop" seen. (Tejun's new EH can reset the > device and bring > it back to work.) > > Don't know what caused the timeout. From the device status 0xd0, it seems > the device is waiting for something (maybe data transfer?). It is not > irq lost > because the irq is not yet generated when the device status is still > BUSY. > > Is it possible to attach a protocol analyzer to the SATA cable > and check whether the ATAPI DMA data is actually transferred? > Could you also post the dmesg log with ATA_DEBUG for the working > Intel/nVidia > adapter? Maybe we can find some clue by comparing the problematic MODE > SENSE transation of both logs. > > I've done minimal testing with my VIA VT6421 + ATAPI but unable to > reproduce > the problem. > > Thanks, > > Albert > > Sorry it took so long to get you the information. In case you need me to refresh the information here is the body of the original email I had sent out. "We have a removable, ATAPI, SATA device and we are having the following problem with Linux (kernel version 2.6.15.6). The device recieves a MODE SENSE command. After receiving this command, it is supposed to receive a 12-byte packet command, which it recieves. Afterwards there is supposed to be an IRQ, and then the data is read from the device. However, in one computer we have with a VIA chipset, the device keeps getting zeroes without stopping. In other words, it gets the 12-bytes and the continues to recive bytes all of which are zero. The device never gets the IRQ, therefore it does not respond." I also attached the kernel messages running on intel, nvidia, and via chipsets. Dario Oliva --------------070105020004030408060202 Content-Type: text/plain; name="dmesg_2.6.15.6-ezb_intel" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg_2.6.15.6-ezb_intel" ments mapped ata_exec_command_pio: ata2: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata2: protocol 7 (dev_stat 0x50) ata_scsi_dump_cdb: CDB (2:0,0,0) 5a 00 08 00 00 00 00 00 1c ata_sg_setup: 1 sg elements mapped ata_exec_command_pio: ata2: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata2: protocol 7 (dev_stat 0x50) SCSI device sda: drive cache: write through ata_scsi_dump_cdb: CDB (2:0,0,0) 1e 00 00 00 01 00 00 00 1c ata_exec_command_pio: ata2: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata2: protocol 6 (dev_stat 0x51) atapi_request_sense: ATAPI request sense ata_exec_command_pio: ata2: cmd 0xA0 atapi_request_sense: EXIT atapi_packet_task: busy wait atapi_packet_task: send cdb __atapi_pio_bytes: data read Device not ready. Make sure there is a disc in the drive. ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 1c ata_exec_command_pio: ata2: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata2: protocol 6 (dev_stat 0x50) ata_scsi_dump_cdb: CDB (2:0,0,0) 25 00 00 00 00 00 00 00 00 ata_sg_setup: 1 sg elements mapped ata_exec_command_pio: ata2: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata2: protocol 7 (dev_stat 0x51) atapi_request_sense: ATAPI request sense ata_exec_command_pio: ata2: cmd 0xA0 atapi_request_sense: EXIT atapi_packet_task: busy wait atapi_packet_task: send cdb __atapi_pio_bytes: data read ata_scsi_dump_cdb: CDB (2:0,0,0) 5a 00 3f 00 00 00 00 00 08 ata_sg_setup: 1 sg elements mapped ata_exec_command_pio: ata2: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata2: protocol 7 (dev_stat 0x50) sda: Write Protect is off sda: Mode Sense: 00 38 00 00 ata_scsi_dump_cdb: CDB (2:0,0,0) 5a 00 08 00 00 00 00 00 08 ata_sg_setup: 1 sg elements mapped ata_exec_command_pio: ata2: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata2: protocol 7 (dev_stat 0x50) ata_scsi_dump_cdb: CDB (2:0,0,0) 5a 00 08 00 00 00 00 00 1c ata_sg_setup: 1 sg elements mapped ata_exec_command_pio: ata2: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata2: protocol 7 (dev_stat 0x50) SCSI device sda: drive cache: write through ata_scsi_dump_cdb: CDB (2:0,0,0) 1b 00 00 00 01 00 00 00 00 ata_exec_command_pio: ata2: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata2: protocol 6 (dev_stat 0x50) ata_scsi_dump_cdb: CDB (2:0,0,0) 1b 00 00 00 01 00 00 00 00 ata_exec_command_pio: ata2: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata2: protocol 6 (dev_stat 0x50) ata_scsi_dump_cdb: CDB (2:0,0,0) 1e 00 00 00 00 00 00 00 00 ata_exec_command_pio: ata2: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata2: protocol 6 (dev_stat 0x50) ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00 ata_exec_command_pio: ata2: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata2: protocol 6 (dev_stat 0x50) ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00 ata_exec_command_pio: ata2: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata2: protocol 6 (dev_stat 0x50) ata_scsi_dump_cdb: CDB (2:0,0,0) 25 00 00 00 00 00 00 00 00 ata_sg_setup: 1 sg elements mapped ata_exec_command_pio: ata2: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata2: protocol 7 (dev_stat 0x50) SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) ata_scsi_dump_cdb: CDB (2:0,0,0) 5a 00 3f 00 00 00 00 00 08 ata_sg_setup: 1 sg elements mapped ata_exec_command_pio: ata2: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata2: protocol 7 (dev_stat 0x50) sda: Write Protect is off sda: Mode Sense: 00 38 00 00 ata_scsi_dump_cdb: CDB (2:0,0,0) 5a 00 08 00 00 00 00 00 08 ata_sg_setup: 1 sg elements mapped ata_exec_command_pio: ata2: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata2: protocol 7 (dev_stat 0x50) ata_scsi_dump_cdb: CDB (2:0,0,0) 5a 00 08 00 00 00 00 00 1c ata_sg_setup: 1 sg elements mapped ata_exec_command_pio: ata2: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata2: protocol 7 (dev_stat 0x50) SCSI device sda: drive cache: write through ata_scsi_dump_cdb: CDB (2:0,0,0) 1e 00 00 00 01 00 00 00 1c ata_exec_command_pio: ata2: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata2: protocol 6 (dev_stat 0x50) ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 1c ata_exec_command_pio: ata2: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata2: protocol 6 (dev_stat 0x50) ata_scsi_dump_cdb: CDB (2:0,0,0) 25 00 00 00 00 00 00 00 00 ata_sg_setup: 1 sg elements mapped ata_exec_command_pio: ata2: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata2: protocol 7 (dev_stat 0x50) SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) ata_scsi_dump_cdb: CDB (2:0,0,0) 5a 00 3f 00 00 00 00 00 08 ata_sg_setup: 1 sg elements mapped ata_exec_command_pio: ata2: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata2: protocol 7 (dev_stat 0x50) sda: Write Protect is off sda: Mode Sense: 00 38 00 00 ata_scsi_dump_cdb: CDB (2:0,0,0) 5a 00 08 00 00 00 00 00 08 ata_sg_setup: 1 sg elements mapped ata_exec_command_pio: ata2: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata2: protocol 7 (dev_stat 0x50) ata_scsi_dump_cdb: CDB (2:0,0,0) 5a 00 08 00 00 00 00 00 1c ata_sg_setup: 1 sg elements mapped ata_exec_command_pio: ata2: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata2: protocol 7 (dev_stat 0x50) SCSI device sda: drive cache: write through sda:<3>ata_scsi_dump_cdb: CDB (2:0,0,0) 28 00 00 00 00 00 00 00 08 ata_sg_setup: 1 sg elements mapped ata_exec_command_pio: ata2: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata2: protocol 7 (dev_stat 0x50) sda1 ata_scsi_dump_cdb: CDB (2:0,0,0) 12 00 00 00 ff 00 00 00 00 ata_sg_setup: padding done, sg[0].length=252 pad_len=3 ata_sg_setup: 1 sg elements mapped ata_exec_command_pio: ata2: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata2: protocol 7 (dev_stat 0x50) ata_scsi_dump_cdb: CDB (2:0,0,0) 25 00 00 00 00 00 00 00 00 ata_sg_setup: 1 sg elements mapped ata_exec_command_pio: ata2: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata2: protocol 7 (dev_stat 0x50) ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00 ata_exec_command_pio: ata2: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata2: protocol 6 (dev_stat 0x50) ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00 ata_exec_command_pio: ata2: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata2: protocol 6 (dev_stat 0x50) ata_scsi_dump_cdb: CDB (2:0,0,0) 28 00 00 00 00 08 00 00 38 ata_sg_setup: 3 sg elements mapped ata_exec_command_pio: ata2: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata2: protocol 7 (dev_stat 0x50) ata_scsi_dump_cdb: CDB (2:0,0,0) 28 00 00 00 00 64 00 00 c8 ata_sg_setup: 25 sg elements mapped ata_exec_command_pio: ata2: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata2: protocol 7 (dev_stat 0x50) --------------070105020004030408060202 Content-Type: text/plain; name="dmesg_2.6.15.6-ezb_nvidia" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg_2.6.15.6-ezb_nvidia" 00 00 01 00 00 00 1c ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata1: protocol 6 (dev_stat 0x51) atapi_request_sense: ATAPI request sense ata_exec_command_pio: ata1: cmd 0xA0 atapi_request_sense: EXIT atapi_packet_task: busy wait atapi_packet_task: send cdb __atapi_pio_bytes: data read Device not ready. Make sure there is a disc in the drive. ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 1c ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata1: protocol 6 (dev_stat 0x50) ata_scsi_dump_cdb: CDB (1:0,0,0) 25 00 00 00 00 00 00 00 00 ata_sg_setup: 1 sg elements mapped ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata1: protocol 7 (dev_stat 0x51) atapi_request_sense: ATAPI request sense ata_exec_command_pio: ata1: cmd 0xA0 atapi_request_sense: EXIT atapi_packet_task: busy wait atapi_packet_task: send cdb __atapi_pio_bytes: data read ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 3f 00 00 00 00 00 08 ata_sg_setup: 1 sg elements mapped ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata1: protocol 7 (dev_stat 0x50) sda: Write Protect is off sda: Mode Sense: 00 38 00 00 ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 08 00 00 00 00 00 08 ata_sg_setup: 1 sg elements mapped ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata1: protocol 7 (dev_stat 0x50) ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 08 00 00 00 00 00 1c ata_sg_setup: 1 sg elements mapped ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata1: protocol 7 (dev_stat 0x50) SCSI device sda: drive cache: write through ata_scsi_dump_cdb: CDB (1:0,0,0) 1b 00 00 00 01 00 00 00 00 ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata1: protocol 6 (dev_stat 0x50) ata_scsi_dump_cdb: CDB (1:0,0,0) 1b 00 00 00 01 00 00 00 00 ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata1: protocol 6 (dev_stat 0x50) ata_scsi_dump_cdb: CDB (1:0,0,0) 1e 00 00 00 00 00 00 00 00 ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata1: protocol 6 (dev_stat 0x50) ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 00 ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata1: protocol 6 (dev_stat 0x50) ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 00 ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata1: protocol 6 (dev_stat 0x50) ata_scsi_dump_cdb: CDB (1:0,0,0) 25 00 00 00 00 00 00 00 00 ata_sg_setup: 1 sg elements mapped ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata1: protocol 7 (dev_stat 0x50) SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB) ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 3f 00 00 00 00 00 08 ata_sg_setup: 1 sg elements mapped ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata1: protocol 7 (dev_stat 0x50) sda: Write Protect is off sda: Mode Sense: 00 38 00 00 ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 08 00 00 00 00 00 08 ata_sg_setup: 1 sg elements mapped ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata1: protocol 7 (dev_stat 0x50) ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 08 00 00 00 00 00 1c ata_sg_setup: 1 sg elements mapped ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata1: protocol 7 (dev_stat 0x50) SCSI device sda: drive cache: write through ata_scsi_dump_cdb: CDB (1:0,0,0) 1e 00 00 00 01 00 00 00 1c ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata1: protocol 6 (dev_stat 0x50) ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 1c ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata1: protocol 6 (dev_stat 0x50) ata_scsi_dump_cdb: CDB (1:0,0,0) 25 00 00 00 00 00 00 00 00 ata_sg_setup: 1 sg elements mapped ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata1: protocol 7 (dev_stat 0x50) SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB) ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 3f 00 00 00 00 00 08 ata_sg_setup: 1 sg elements mapped ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata1: protocol 7 (dev_stat 0x50) sda: Write Protect is off sda: Mode Sense: 00 38 00 00 ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 08 00 00 00 00 00 08 ata_sg_setup: 1 sg elements mapped ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata1: protocol 7 (dev_stat 0x50) ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 08 00 00 00 00 00 1c ata_sg_setup: 1 sg elements mapped ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata1: protocol 7 (dev_stat 0x50) SCSI device sda: drive cache: write through sda:<3>ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 00 00 00 00 00 00 08 ata_sg_setup: 1 sg elements mapped ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata1: protocol 7 (dev_stat 0x50) sda1 ata_scsi_dump_cdb: CDB (1:0,0,0) 12 00 00 00 ff 00 00 00 00 ata_sg_setup: padding done, sg[0].length=252 pad_len=3 ata_sg_setup: 1 sg elements mapped ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata1: protocol 7 (dev_stat 0x50) ata_scsi_dump_cdb: CDB (1:0,0,0) 25 00 00 00 00 00 00 00 00 ata_sg_setup: 1 sg elements mapped ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata1: protocol 7 (dev_stat 0x50) ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 00 ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata1: protocol 6 (dev_stat 0x50) ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 00 ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata1: protocol 6 (dev_stat 0x50) ata_scsi_dump_cdb: CDB (2:0,0,0) 28 00 00 00 00 00 00 00 40 ata_sg_setup: 3 sg elements mapped ata_exec_command_pio: ata2: cmd 0x25 ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 00 00 00 08 00 00 38 ata_sg_setup: 2 sg elements mapped ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata1: protocol 7 (dev_stat 0x50) ata_host_intr: ata2: protocol 4 (dev_stat 0x50) ata_scsi_dump_cdb: CDB (2:0,0,0) 12 00 00 00 ff 00 00 00 00 ata_scsi_dump_cdb: CDB (2:0,0,0) 25 00 00 00 00 00 00 00 00 ata_scsi_dump_cdb: CDB (2:0,0,0) 28 00 00 00 00 64 00 00 ff ata_sg_setup: 30 sg elements mapped ata_exec_command_pio: ata2: cmd 0x25 ata_host_intr: ata2: protocol 4 (dev_stat 0x50) ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 00 00 00 64 00 00 c8 ata_sg_setup: 23 sg elements mapped ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata1: protocol 7 (dev_stat 0x50) --------------070105020004030408060202 Content-Type: text/plain; name="dmesg_2.6.15.6-ezb_via" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg_2.6.15.6-ezb_via" 0 00 00 00 00 00 00 ata_sg_setup: 1 sg elements mapped ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata1: protocol 7 (dev_stat 0x51) atapi_request_sense: ATAPI request sense ata_exec_command_pio: ata1: cmd 0xA0 atapi_request_sense: EXIT atapi_packet_task: busy wait atapi_packet_task: send cdb __atapi_pio_bytes: data read ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 3f 00 00 00 00 00 08 ata_sg_setup: 1 sg elements mapped ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata1: protocol 7 (dev_stat 0x50) sda: Write Protect is off sda: Mode Sense: 00 38 00 00 ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 08 00 00 00 00 00 08 ata_sg_setup: 1 sg elements mapped ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata1: protocol 7 (dev_stat 0x50) ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 08 00 00 00 00 00 1c ata_sg_setup: 1 sg elements mapped ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata1: protocol 7 (dev_stat 0x50) SCSI device sda: drive cache: write through sd 0:0:0:0: Attached scsi removable disk sda sd 0:0:0:0: Attached scsi generic sg0 type 0 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected AGP bridge 0 agpgart: AGP aperture is 128M @ 0xe8000000 ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 00 ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata1: protocol 6 (dev_stat 0x50) ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 00 ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata1: protocol 6 (dev_stat 0x50) ata_scsi_dump_cdb: CDB (1:0,0,0) 25 00 00 00 00 00 00 00 00 ata_sg_setup: 1 sg elements mapped ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata1: protocol 7 (dev_stat 0x51) atapi_request_sense: ATAPI request sense ata_exec_command_pio: ata1: cmd 0xA0 atapi_request_sense: EXIT atapi_packet_task: busy wait atapi_packet_task: send cdb __atapi_pio_bytes: data read ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 3f 00 00 00 00 00 08 ata_sg_setup: 1 sg elements mapped ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata1: protocol 7 (dev_stat 0x50) sda: Write Protect is off sda: Mode Sense: 00 38 00 00 ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 08 00 00 00 00 00 08 ata_sg_setup: 1 sg elements mapped ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata1: protocol 7 (dev_stat 0x50) ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 08 00 00 00 00 00 1c ata_sg_setup: 1 sg elements mapped ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata1: protocol 7 (dev_stat 0x50) SCSI device sda: drive cache: write through ata_scsi_dump_cdb: CDB (1:0,0,0) 1e 00 00 00 01 00 00 00 1c ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata1: protocol 6 (dev_stat 0x51) atapi_request_sense: ATAPI request sense ata_exec_command_pio: ata1: cmd 0xA0 atapi_request_sense: EXIT atapi_packet_task: busy wait atapi_packet_task: send cdb __atapi_pio_bytes: data read Device not ready. Make sure there is a disc in the drive. ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 1c ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata1: protocol 6 (dev_stat 0x50) ata_scsi_dump_cdb: CDB (1:0,0,0) 25 00 00 00 00 00 00 00 00 ata_sg_setup: 1 sg elements mapped ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata1: protocol 7 (dev_stat 0x51) atapi_request_sense: ATAPI request sense ata_exec_command_pio: ata1: cmd 0xA0 atapi_request_sense: EXIT atapi_packet_task: busy wait atapi_packet_task: send cdb __atapi_pio_bytes: data read ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 3f 00 00 00 00 00 08 ata_sg_setup: 1 sg elements mapped ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata1: protocol 7 (dev_stat 0x50) sda: Write Protect is off sda: Mode Sense: 00 38 00 00 ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 08 00 00 00 00 00 08 ata_sg_setup: 1 sg elements mapped ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_host_intr: ata1: protocol 7 (dev_stat 0x50) ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 08 00 00 00 00 00 1c ata_sg_setup: 1 sg elements mapped ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait atapi_packet_task: send cdb ata_scsi_error: ENTER ata_eng_timeout: ENTER ata_qc_timeout: ENTER ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x1 ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 ata_qc_timeout: EXIT ata_eng_timeout: EXIT ata_scsi_error: EXIT sda: asking for cache data failed sda: assuming drive cache: write through program hwscan is using a deprecated SCSI ioctl, please convert it to SG_IO ata_scsi_dump_cdb: CDB (1:0,0,0) 12 01 80 00 ff 00 00 00 1c ata_sg_setup_one: mapped buffer of 512 bytes for read ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait ata1 is slow to respond, please be patient ata1 failed to respond (30 secs) ATA: abnormal status 0xD0 on port 0xE007 ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 ata_scsi_dump_cdb: CDB (1:0,0,0) 1e 00 00 00 00 00 00 00 1c ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait ata1 is slow to respond, please be patient ata_scsi_error: ENTER ata_eng_timeout: ENTER ata_qc_timeout: ENTER ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x0 ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 ata_qc_timeout: EXIT ata_eng_timeout: EXIT ata_scsi_error: EXIT sd 0:0:0:0: ioctl_internal_command return code = 8000002 : Current [descriptor]: sense key: Aborted Command Additional sense: Scsi parity error ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 1c ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ata_exec_command_pio: ata1: cmd 0xA0 ip_tables: (C) 2000-2002 Netfilter core team NET: Registered protocol family 17 e100: Intel(R) PRO/100 Network Driver, 3.4.14-k4-NAPI e100: Copyright(c) 1999-2005 Intel Corporation eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 eth0: Promiscuous mode enabled. device eth0 entered promiscuous mode eth0: Promiscuous mode enabled. eth0: Promiscuous mode enabled. eth0: Promiscuous mode enabled. eth0: Promiscuous mode enabled. eth0: Promiscuous mode enabled. eth0: Promiscuous mode enabled. eth0: Promiscuous mode enabled. ata1 failed to respond (30 secs) ATA: abnormal status 0xD0 on port 0xE007 ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 1c ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait ata1 is slow to respond, please be patient p_cdb: CDB (1:0,0,0) 1e 00 00 00 00 00 00 00 1c ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait ata1 is slow to respond, please be patient ata_scsi_error: ENTER ata_eng_timeout: ENTER ata_qc_timeout: ENTER ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x0 ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 ata_qc_timeout: EXIT ata_eng_timeout: EXIT ata_scsi_error: EXIT sd 0:0:0:0: ioctl_internal_command return code = 8000002 : Current [descriptor]: sense key: Aborted Command Additional sense: Scsi parity error ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 1c ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ata_exec_command_pio: ata1: cmd 0xA0 ip_tables: (C) 2000-2002 Netfilter core team NET: Registered protocol family 17 e100: Intel(R) PRO/100 Network Driver, 3.4.14-k4-NAPI e100: Copyright(c) 1999-2005 Intel Corporation eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 eth0: Promiscuous mode enabled. device eth0 entered promiscuous mode eth0: Promiscuous mode enabled. eth0: Promiscuous mode enabled. eth0: Promiscuous mode enabled. eth0: Promiscuous mode enabled. eth0: Promiscuous mode enabled. eth0: Promiscuous mode enabled. eth0: Promiscuous mode enabled. ata1 failed to respond (30 secs) ATA: abnormal status 0xD0 on port 0xE007 ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 1c ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait ata1 is slow to respond, please be patient ata_scsi_error: ENTER ata_eng_timeout: ENTER ata_qc_timeout: ENTER ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x0 ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 ata_qc_timeout: EXIT ata_eng_timeout: EXIT ata_scsi_error: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 1c ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ata_exec_command_pio: ata1: cmd 0xA0 ata1 failed to respond (30 secs) ATA: abnormal status 0xD0 on port 0xE007 ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 1c ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait ata1 is slow to respond, please be patient ata_scsi_error: ENTER ata_eng_timeout: ENTER ata_qc_timeout: ENTER ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x0 ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 ata_qc_timeout: EXIT ata_eng_timeout: EXIT ata_scsi_error: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 1c ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ata_exec_command_pio: ata1: cmd 0xA0 ata1 failed to respond (30 secs) ATA: abnormal status 0xD0 on port 0xE007 ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 1c ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait ata1 is slow to respond, please be patient ata_scsi_error: ENTER ata_eng_timeout: ENTER ata_qc_timeout: ENTER ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x0 ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 ata_qc_timeout: EXIT ata_eng_timeout: EXIT ata_scsi_error: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 1c ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ata_exec_command_pio: ata1: cmd 0xA0 ata1 failed to respond (30 secs) ATA: abnormal status 0xD0 on port 0xE007 ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 1c ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait ata1 is slow to respond, please be patient ata_scsi_error: ENTER ata_eng_timeout: ENTER ata_qc_timeout: ENTER ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x0 ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 ata_qc_timeout: EXIT ata_eng_timeout: EXIT ata_scsi_error: EXIT sda: Unit Not Ready, sense: : Current [descriptor]: sense key: Aborted Command Additional sense: Scsi parity error ata_scsi_dump_cdb: CDB (1:0,0,0) 25 00 00 00 00 00 00 00 00 ata_sg_setup: 1 sg elements mapped ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ata_exec_command_pio: ata1: cmd 0xA0 ata1 failed to respond (30 secs) ATA: abnormal status 0xD0 on port 0xE007 ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 ata_scsi_dump_cdb: CDB (1:0,0,0) 25 00 00 00 00 00 00 00 00 ata_sg_setup: 1 sg elements mapped ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait ata1 is slow to respond, please be patient ata_scsi_error: ENTER ata_eng_timeout: ENTER ata_qc_timeout: ENTER ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x0 ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 ata_qc_timeout: EXIT ata_eng_timeout: EXIT ata_scsi_error: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 25 00 00 00 00 00 00 00 00 ata_sg_setup: 1 sg elements mapped ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ata_exec_command_pio: ata1: cmd 0xA0 ata1 failed to respond (30 secs) ATA: abnormal status 0xD0 on port 0xE007 ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 ata_scsi_dump_cdb: CDB (1:0,0,0) 25 00 00 00 00 00 00 00 00 ata_sg_setup: 1 sg elements mapped ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait ata1 is slow to respond, please be patient ata_scsi_error: ENTER ata_eng_timeout: ENTER ata_qc_timeout: ENTER ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x0 ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 ata_qc_timeout: EXIT ata_eng_timeout: EXIT ata_scsi_error: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 25 00 00 00 00 00 00 00 00 ata_sg_setup: 1 sg elements mapped ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ata_exec_command_pio: ata1: cmd 0xA0 ata1 failed to respond (30 secs) ATA: abnormal status 0xD0 on port 0xE007 ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 ata_scsi_dump_cdb: CDB (1:0,0,0) 25 00 00 00 00 00 00 00 00 ata_sg_setup: 1 sg elements mapped ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait ata1 is slow to respond, please be patient si_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 1c ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ata_exec_command_pio: ata1: cmd 0xA0 ata1 failed to respond (30 secs) ATA: abnormal status 0xD0 on port 0xE007 ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 1c ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait ata1 is slow to respond, please be patient ata_scsi_error: ENTER ata_eng_timeout: ENTER ata_qc_timeout: ENTER ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x0 ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 ata_qc_timeout: EXIT ata_eng_timeout: EXIT ata_scsi_error: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 1c ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ata_exec_command_pio: ata1: cmd 0xA0 ata1 failed to respond (30 secs) ATA: abnormal status 0xD0 on port 0xE007 ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 1c ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait ata1 is slow to respond, please be patient ata_scsi_error: ENTER ata_eng_timeout: ENTER ata_qc_timeout: ENTER ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x0 ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 ata_qc_timeout: EXIT ata_eng_timeout: EXIT ata_scsi_error: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 1c ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ata_exec_command_pio: ata1: cmd 0xA0 ata1 failed to respond (30 secs) ATA: abnormal status 0xD0 on port 0xE007 ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 1c ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait ata1 is slow to respond, please be patient ata_scsi_error: ENTER ata_eng_timeout: ENTER ata_qc_timeout: ENTER ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x0 ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 ata_qc_timeout: EXIT ata_eng_timeout: EXIT ata_scsi_error: EXIT sda: Unit Not Ready, sense: : Current [descriptor]: sense key: Aborted Command Additional sense: Scsi parity error ata_scsi_dump_cdb: CDB (1:0,0,0) 25 00 00 00 00 00 00 00 00 ata_sg_setup: 1 sg elements mapped ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ata_exec_command_pio: ata1: cmd 0xA0 ata1 failed to respond (30 secs) ATA: abnormal status 0xD0 on port 0xE007 ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 ata_scsi_dump_cdb: CDB (1:0,0,0) 25 00 00 00 00 00 00 00 00 ata_sg_setup: 1 sg elements mapped ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait ata1 is slow to respond, please be patient ata_scsi_error: ENTER ata_eng_timeout: ENTER ata_qc_timeout: ENTER ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x0 ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 ata_qc_timeout: EXIT ata_eng_timeout: EXIT ata_scsi_error: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 25 00 00 00 00 00 00 00 00 ata_sg_setup: 1 sg elements mapped ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ata_exec_command_pio: ata1: cmd 0xA0 ata1 failed to respond (30 secs) ATA: abnormal status 0xD0 on port 0xE007 ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 ata_scsi_dump_cdb: CDB (1:0,0,0) 25 00 00 00 00 00 00 00 00 ata_sg_setup: 1 sg elements mapped ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait ata1 is slow to respond, please be patient ata_scsi_error: ENTER ata_eng_timeout: ENTER ata_qc_timeout: ENTER ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x0 ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 ata_qc_timeout: EXIT ata_eng_timeout: EXIT ata_scsi_error: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 25 00 00 00 00 00 00 00 00 ata_sg_setup: 1 sg elements mapped ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ata_exec_command_pio: ata1: cmd 0xA0 ata1 failed to respond (30 secs) ATA: abnormal status 0xD0 on port 0xE007 ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 ata_scsi_dump_cdb: CDB (1:0,0,0) 25 00 00 00 00 00 00 00 00 ata_sg_setup: 1 sg elements mapped ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait ata1 is slow to respond, please be patient ata_scsi_error: ENTER ata_eng_timeout: ENTER ata_qc_timeout: ENTER ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x0 ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 ata_qc_timeout: EXIT ata_eng_timeout: EXIT ata_scsi_error: EXIT sda : READ CAPACITY failed. sda : status=1, message=00, host=0, driver=08 sd: Current [descriptor]: sense key: Aborted Command Additional sense: Scsi parity error ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 3f 00 00 00 00 00 08 ata_sg_setup: 1 sg elements mapped ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ata_exec_command_pio: ata1: cmd 0xA0 ata1 failed to respond (30 secs) ATA: abnormal status 0xD0 on port 0xE007 ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 3f 00 00 00 00 00 08 ata_sg_setup: 1 sg elements mapped ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait ata1 is slow to respond, please be patient ata_scsi_error: ENTER ata_eng_timeout: ENTER ata_qc_timeout: ENTER ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x0 ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 ata_qc_timeout: EXIT ata_eng_timeout: EXIT ata_scsi_error: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 00 00 00 00 00 00 08 ata_sg_setup: 1 sg elements mapped ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ata_exec_command_pio: ata1: cmd 0xA0 ata1 failed to respond (30 secs) ATA: abnormal status 0xD0 on port 0xE007 ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 00 00 00 00 00 00 08 ata_sg_setup: 1 sg elements mapped ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait ata1 is slow to respond, please be patient b/47/00 ata_scsi_dump_cdb: CDB (1:0,0,0) 25 00 00 00 00 00 00 00 00 ata_sg_setup: 1 sg elements mapped ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait ata1 is slow to respond, please be patient ata_scsi_error: ENTER ata_eng_timeout: ENTER ata_qc_timeout: ENTER ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x0 ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 ata_qc_timeout: EXIT ata_eng_timeout: EXIT ata_scsi_error: EXIT sda : READ CAPACITY failed. sda : status=1, message=00, host=0, driver=08 sd: Current [descriptor]: sense key: Aborted Command Additional sense: Scsi parity error ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 3f 00 00 00 00 00 08 ata_sg_setup: 1 sg elements mapped ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ata_exec_command_pio: ata1: cmd 0xA0 ata1 failed to respond (30 secs) ATA: abnormal status 0xD0 on port 0xE007 ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 3f 00 00 00 00 00 08 ata_sg_setup: 1 sg elements mapped ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait ata1 is slow to respond, please be patient ata_scsi_error: ENTER ata_eng_timeout: ENTER ata_qc_timeout: ENTER ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x0 ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 ata_qc_timeout: EXIT ata_eng_timeout: EXIT ata_scsi_error: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 00 00 00 00 00 00 08 ata_sg_setup: 1 sg elements mapped ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ata_exec_command_pio: ata1: cmd 0xA0 ata1 failed to respond (30 secs) ATA: abnormal status 0xD0 on port 0xE007 ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 00 00 00 00 00 00 08 ata_sg_setup: 1 sg elements mapped ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait ata1 is slow to respond, please be patient VFS: Can't find ext3 filesystem on dev fd0. VFS: Can't find an ext2 filesystem on dev fd0. VFS: Can't find a Minix or Minix V2 filesystem on device fd0. Unable to load NLS charset cp437 FAT: codepage cp437 not found Unable to load NLS charset cp437 FAT: codepage cp437 not found Unable to identify CD-ROM format. Unable to load NLS charset iso8859-1 NTFS-fs warning (device fd0): is_boot_sector_ntfs(): Invalid boot sector checksum. NTFS-fs error (device fd0): read_ntfs_boot_sector(): Primary boot sector is invalid. NTFS-fs error (device fd0): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover. NTFS-fs error (device fd0): ntfs_fill_super(): Not an NTFS volume. ata_scsi_error: ENTER ata_eng_timeout: ENTER ata_qc_timeout: ENTER ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x0 ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 ata_qc_timeout: EXIT ata_eng_timeout: EXIT ata_scsi_error: EXIT ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 3f 00 00 00 00 00 ff ata_sg_setup: padding done, sg[0].length=252 pad_len=3 ata_sg_setup: 1 sg elements mapped ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ata_exec_command_pio: ata1: cmd 0xA0 ata1 failed to respond (30 secs) ATA: abnormal status 0xD0 on port 0xE007 ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 3f 00 00 00 00 00 ff ata_sg_setup: padding done, sg[0].length=252 pad_len=3 ata_sg_setup: 1 sg elements mapped ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait ata1 is slow to respond, please be patient VFS: Can't find ext3 filesystem on dev fd0. VFS: Can't find an ext2 filesystem on dev fd0. VFS: Can't find a Minix or Minix V2 filesystem on device fd0. Unable to load NLS charset cp437 FAT: codepage cp437 not found Unable to load NLS charset cp437 FAT: codepage cp437 not found Unable to identify CD-ROM format. Unable to load NLS charset iso8859-1 NTFS-fs warning (device fd0): is_boot_sector_ntfs(): Invalid boot sector checksum. NTFS-fs error (device fd0): read_ntfs_boot_sector(): Primary boot sector is invalid. NTFS-fs error (device fd0): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover. NTFS-fs error (device fd0): ntfs_fill_super(): Not an NTFS volume. ata_scsi_error: ENTER ata_eng_timeout: ENTER ata_qc_timeout: ENTER ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x0 ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 ata_qc_timeout: EXIT ata_eng_timeout: EXIT ata_scsi_error: EXIT sda: test WP failed, assume Write Enabled ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 08 00 00 00 00 00 08 ata_sg_setup: 1 sg elements mapped ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ata_exec_command_pio: ata1: cmd 0xA0 ata1 failed to respond (30 secs) ATA: abnormal status 0xD0 on port 0xE007 ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 08 00 00 00 00 00 08 ata_sg_setup: 1 sg elements mapped ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait ata1 is slow to respond, please be patient Unable to load NLS charset cp437 FAT: codepage cp437 not found ata_scsi_error: ENTER ata_eng_timeout: ENTER ata_qc_timeout: ENTER ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x0 ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 ata_qc_timeout: EXIT ata_eng_timeout: EXIT ata_scsi_error: EXIT sda: asking for cache data failed sda: assuming drive cache: write through ata_scsi_dump_cdb: CDB (1:0,0,0) 1e 00 00 00 01 00 00 00 08 ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ata_exec_command_pio: ata1: cmd 0xA0 ata1 failed to respond (30 secs) ATA: abnormal status 0xD0 on port 0xE007 ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 ata_scsi_dump_cdb: CDB (1:0,0,0) 1e 00 00 00 01 00 00 00 08 ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ata_exec_command_pio: ata1: cmd 0xA0 atapi_packet_task: busy wait ata1 is slow to respond, please be patient ata_scsi_error: ENTER ata_eng_timeout: ENTER ata_qc_timeout: ENTER ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x0 ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 ata_qc_timeout: EXIT ata_eng_timeout: EXIT ata_scsi_error: EXIT sd 0:0:0:0: ioctl_internal_command return code = 8000002 : Current [descriptor]: sense key: Aborted Command Additional sense: Scsi parity error ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 08 ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ATA: abnormal status 0xD0 on port 0xE007 ata_exec_command_pio: ata1: cmd 0xA0 --------------070105020004030408060202--