Re: 2.6.16.20 fails to boot on SATA system but works on IDE

[Barry Scott <barry.scott@onelan.co.uk>]

Barry Scott wrote:
> I originally post to linux kernel dev list. But guess that this is a
> more appropriate list to ask for help on.
>
> After failing to get 2.6.17-rc6 working on a HP dc7600U I went back
> to 2.6.16.20. It also fails to find any volume group during boot.
>
> I think this might be problem with SATA as I can boot the same build on
> two other systems that have IDE disks.
>
> I get success on VIA Epia M10000 and a P4 Shuttle systems that use
> IDE disks but fail on the HP dc7600U that uses a SATA disk. All three
> systems use LVM2.
>
> The Fedora build of 2.6.16 works on all three systems.
>
> I'm going to see if there are debug messages I can turn on it libata
> and md that might give more information.
>
> Any suggestions as to what I can do to track down this problem?
>
> Barry
If this is the wrong list to ask about this problem can anyone suggest the
right place to ask?

Barry